近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
4.1主要论文
1) Yongjun Shi, Chen Zhang, Guidong Sun, Chuanxiu Li.Study on reducing edge effects by using assistant force in laserforming [J].Journal of Materials Processing Technology, 2016, 227: 169-177.
2) Li Chengkai, Liu Yancong, ShiYongjun, et al. Modelling of high-frequency induction heating surface cladding process: numerical simulation, experimental measurement and validation[C]. International Conference on Industrial Engineering and Information Technology,2014,97-101.
3) Liu Yancong, Li Chengkai, Xie Jianghao, Shi Yongjun, et al. Simulation on the high frequency induction cladding and experimental validation[J]. Journal of Information & Computational Science, 2015, 12(2): 641-656.
4) Yi Peng, Xu Pengyun, Fan Changfeng, Yang Guanghui, Liu Dan, and Shi Yongjun. Microstructure formation and fracturing characteristics of grey cast iron repaired using laser[J]. Sci. World J. 2014, 541569:1-10 .
5)Shi Yongjun, Lu Xianfa, Yi Peng and Liu Zhongyan.Effect of heating paths on strain distribution of plate in laser forming[J]. Int J Adv Manuf Technol, 2013, 66(1-4):515-521.
6)Shi Yongjun, Lu Xianfa, Liu Yancong and Yi Peng.Forming accuracy analysis of plate in multi-scanning laser bending process[J]. Proc. J. Pro.Mech Eng., 2013, 227(3): 225-228.
7)Shi Yongjun, Yi Peng and Hu Jun. Effects of process parameters on forming accuracy for the case of a laser formed metal plate. Lasers in Engineering[J].Lasers in Engineering, 2013, 26(5-6): 295-310.
8) Shi Yongjun, Liu Yancong, Yi Peng et al.Effect of different heating methods on bending deformation of metal plate under upsetting mechanism in laser forming[J]. Optics & Laser Technology, 2012, 44(2): 486-491.
9) Shi Yongjun, Hu Jun and Dong Chengli. Analysis of geometric effect on forming accuracy in laser forming[J]. Proc IMechE Part B: Journal of Mechanical Engineering Science, 2011, 225(10): 1792-1800.
10) Yi Peng, Liu Yancong, Shi Yongjun et al. Effects analysis of ambient conditions on process of laser surface melting[J].Optics & Laser Technology, 2011, 43(8): 1411–1419 .
11) Yi Peng, Liu Yancong, Shi Yongjun, et al. Analysis and prediction of workpiece size effects in laser surface melting process[J]. Advanced Science Letters, 2011, 4(4-5): 1312-1317.
12) Shi Yongjun, Chen Jun, Qi Yaoguang, et al.Processing strategy for laser forming of complicated singly curved shapes[J]. Materials Science and Technology, 2009, 25(7):925-930.
13) Shi Yongjun, Liu Yancong, Yao Zhenqiang, et al. A study on bending direction of sheet metal in laser forming[J].Journal of Applied Physics, 2008, 103(5), 053101.
14)Shi Yongjun, Yao Zhenqiang, Liu Feng,et al. Numerical investigation on laser-produced microstructure of metal under non-melting condition[J].Applied Surface Science,2008, 254(22): 7421-7427.
15)Ying Jin,Jian Hua Wu,Yong Jun Shi,et al. Research on the Mechanisms of Laser Forming for the Micro-Structural Element[C]. Materials Science Forum, 2008, 575-578:1145-1150.
16) Shi Yongjun, Shen Hong, Yao Zhenqiang, et al. An analytical model based on the similarity in temperature distributions in laser forming [J]. Optics & Lasers in Engineering, 2007, 45(1): 83~87.
17)Shi Yongjun, Shen Hong, Yao Zhenqiang, et al. Temperature gradient mechanism of laser forming for thin plates[J]. Optics & Laser Technology, 2007, 39 (4): 858-863.
18) ZQ Yao, H Shen, YJ Shi, J Hu. Numerical study on laser forming of metal plates with pre-loads [J]. Computational Materials Science, 2007, 40(1): 27-32.
19) H Shen, J Zhou, YJ Shi, ZQ Yao, J Hu. Varying velocity scan in laser forming of plates[J]. Materials Science and Technology, 2007, 23(4): 483-486.
20) Shi Yongjun, Yao Zhenqiang, Shen Hong,et al.Research on the mechanisms of laser forming for the metal plate[J]. International Journal of Machine tools & Manufacture, 2006, 46(12-13): 1689-169.
21) Shi Yongjun, Shen Hong, Yao Zhenqiang,et al. Application of similarity theory in the laser forming process[J]. Computational Materials Science, 2006, 37(3): 323-327.
22) Shi Yongjun, Shen Hong,Zhenqiang Yao. Numerical investigation of straight-line laser forming under the temperature gradient mechanism [J]. Acta Metallurgica Sinica, 2006, 19(2):144-150.
23)Shen Hong, Shi Yongjun and Yao Zhenqiang. Numerical simulation of the laser forming of plates using two simultaneous scans[J]. Computational Materials Science,2006, 37(3): 239-245.
24) Shen Hong, Shi Yongjun, Yao Zhenqiang. Laser forming of plates using two sequent scans of different intervals[J]. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 2006, 220(4): 507-511.
25) Shen Hong, Shi Yongjun, Yao Zhenqiang, et al. Fuzzy logic model for bending angle in laser forming[J]. Materials Science and Technology, 2006, 22(8): 981-986.
26) H Shen, YJ Shi, ZQ Yao, J Hu. An analytical model for estimating deformation in laser forming [J]. Computational Materials Science, 2006, 37(4): 593-598.
27) H Shen, Z Yao, Y Shi, J Hu. An analytical formula for estimating the bending angle by laser forming [J]. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2006, 220(2): 243-247.
28) Shi Yongjun, Shen Hong, Yao Zhenqiang, et al. Edge effects of metal plate in laser forming[J]. Transactions of Nonferrous Metals Society of China, 2005, 15(3): 260-263.
29)Shen Hong, Shi Yongjun, Yao Zhenqiang,et al. Analysis of varying velocity on the edge effects in laser bending [J]. Transactions of Nonferrous Metals Society of China, 2005, 15(3): 255-259.
30石永军,刘衍聪,胡俊.基于塑性应变场单曲率面板材激光热成形工艺规划研究[J].中国机械工程,2011, 22(12): 1493-1497
31)伊鹏,刘衍聪,石永军等.铸铁表面激光熔凝行为及温度场数值模拟[J].焊接学报, 2011, 32(8): 81-84.
32)石永军,刘衍聪,姚振强等.双曲率复杂型面激光热成形工艺规划研究[J].中国激光, 2010, 37(2):586-592.
33)伊鹏;刘衍聪;石永军等.基于改进自适应遗传算法的海洋平台管路优化设计方法[J].中国海上油气, 2010, 22(2): 134-138
34)伊鹏,刘衍聪,石永军等.造斜段弯曲钻柱非线性动力学分析与仿真[J].中国石油大学学报(自然科学版), 2010, 6: 129-135.
35)石永军,刘峰,綦耀光等.激光热成形工艺中加热位置对板材变形的影响[J].中国激光, 2008, 35(7): 1087-1090.
36)石永军,杨民,贠平利等.金属板材激光热成形非期望变形的数值模拟研究[J].中国激光, 2008, 35(11): 1825-1829.
37)石永军,白立剑,伊鹏.新型石油钻杆液压矫直机结构分析[J].石油矿场机械, 2013, 42(4): 57-60
38)相恒富;张立军;石永军.基于LSSVM的直线电机进给定位误差补偿研究[J].机械工程师, 2008, 4:49-51
39)石永军,姚振强,沈洪.激光热应力板料成形角变形分析[J].南京航空航天大学学报, 2005, 37(nSUPPL): 99-103.
40)石永军,沈洪,姚振强等.激光热成形温度场和变形场相似性研究[J].光电子·激光, 2006, 17(8): 1018-1021
41)沈洪,石永军,姚振强等.板材激光直线扫描弯曲角度的解析模型[J].上海交通大学学报,2006,40(9): 1525-1528