刘培启 - 大连理工大学

个人简介

教育经历 2003.92009.6 大连理工大学化工过程机械博士 1999.92003.6 大连理工大学过程装备与控制工程学士工作经历 2003.92009.6 大连理工大学化工过程机械博士 1999.92003.6 大连理工大学过程装备与控制工程学士

研究领域

1.高性能热工转换技术及装备。2.氢能储供系统及装备。3.微流控技术及装备。4.非均相分离技术及装备（油砂分离，油气分离，油水分离)。5.移动式承压类特种设备风险防控与治理技术

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

赵家权.激波管中非定常凝结现象的数值分析[J],化工学报,2022,4:1050-1055 赵家权.激波管中非平衡可凝结流的流动分析[J],计算物理,2022,5:707-712 刘培启.Effect of swirl strength on the flow characteristics and separation efficiency of supersonic gas ...[J],international journal of simulation systems,science & technology,2022,17(47):351-356 胡大鹏.Enhancement of refrigeration performance by energy transfer of shock wave[J],APPLIED THERMAL ENGINEERING,2022,130:309-318 刘培启.Experimental Research of Ejecting Performance of Pressure Oscillation Tube[J],Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics,2022,41(2):369-373 刘培启.Influence of the nozzle angle on refrigeration performance of a gas wave refrigerator[J],SHOCK WAVES,2022,27(3):507-516 刘培启.Influence of Non-equilibrium Condensation on key parameter of gas wave refrigerator[A],2018 The 7th International Conference on Informatics, Environment, Energy and Applications（IEEA 2018）,2022 刘培启.Investigation of the Shock Wave Formation and Intensity in Wave Rotor[J],JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME,2022,143(11) 刘培启.Investigation and optimization of waves motion behavior in pressure oscillating tube[J],EXPERIMENTAL THERMAL AND FLUID SCIENCE,2022,50:193-200 刘培启.Investigation on non-equilibrium phase transition in wave rotor[J],INTERNATIONAL JOURNAL OF REFRIGERATION,2022,124:96-104 胡大鹏.The design and influence of port arrangement on an improved wave rotor refrigerator performance[J],APPLIED THERMAL ENGINEERING,2022,107:207-217 刘培启.The effect of swirl strength on the flow characteristics and separation efficiency of supersonic ...[J],International Journal of Simulation Systems Science and Technology,2022,17(47):35.1-35.6 Zhao, Wenjing.The Port Width and Position Determination for Pressure-Exchange Ejector[J],JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER TRANSACTIONS OF THE ASME,2022,134(6) 胡大鹏.Thermodynamic Analysis a Novel Wave Rotor Refrigeration Cycle.[A],Advanced materials research,2022,805(1):537-542 王泽武.Thermomechanical Analysis of Pressure Vessels With Functionally Graded Material Coating[J],JOURNAL OF PRESSURE VESSEL TECHNOLOGY TRANSACTIONS OF THE ASME,2022,138(1) Han, Quanfeng.Thermal buckling analysis of cylindrical shell with functionally graded material coating[J],COMPOSITE STRUCTURES,2022,181:171-182 代玉强.Unsteady Behavior of Real Gas in Wave Rotor refrigerators[J],Advanced materials research,2022,236(1):1516-1522 胡大鹏.Weakening reflected shock wave method in oscillating tube[J],Huagong Xuebao/Journal of Chemical Industry and Engineering (China),2022,59(3):562-566 Zhang, Q..Analytical solution of the thermo-mechanical stresses in a multilayered composite pressure vess...[J],INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING,2022,98:102-110 刘培启.A performance analysis of inverse two-stage dynamic cyclone separator[J],POWDER TECHNOLOGY,2022,351:28-37 刘培启.Mechanism Analysis of Weakening Reverse Compression Waves in Gas Wave Refrigerator[J],Journal of Thermal Science and Engineering Applications,2022,10(6) 刘培启.Performance analysis of wave rotor based on response surface optimization method[J],Journal of Energy Resources Technology, Transactions of the ASME,2022,144(6) 王泽武.Progressive damage analysis of full-wrapped composite gas cylinder under overload condition and p...[J],Strength Fracture and Complexity,2022,9(2):175-185 刘培启.Research on performances of the pressure-exchange ejector[A],Advanced materials research,2022,562(6):1159-1162 刘培启.STRESS OF MAKE-UP TORQUE ON THE GAS STORAGE WELL BORE AND COUPLING CONNECTING THREAD[J],Journal of Theoretical and Applied Mechanics,2022,43(3):33-42 胡大鹏.Study on Wall Temperature Distribution of Oscillating Tube[J],Journal of Thermal Science,2022,18(3):246-252 胡大鹏.一种削弱振荡管内反射激波能量的方法[J],化工学报,2008,3:562-566 刘培启.一种双叶轮动态旋流分离器的分离性能[J],石油学报石油加工,2018,34(2):299-306 刘培启.一种双叶轮动态旋流分离器的压力性能[J],石油学报石油加工,2017,4:693-700 陈祖志.储气井螺纹连接安全性有限元模拟分析及实验研究[J],中国安全生产科学技术,2012,10:58-63 刘蕊.充装量及筒体长度对车载LNG气瓶共振频率影响的数值模拟分析[J],化工学报,2019,70(11):4486-4496 刘培启.偏角对气波制冷机制冷效率的影响及预测[J],化工学报,2014,11:4271-4277 徐上峰.利用数值模拟结果对离心机设计进行修正[A],第十届全国高等学校过程装备与控制工程专业教学改革与学科建设成果校际交流会,2006,407-410 刘培启.CNG-2型气瓶的数值模拟方法对比[J],玻璃钢复合材料,2016,9:55-60 刘培启.碳纤维增强环氧树脂复合材料修复N80Q钢管的力学性能[J],复合材料学报,2020,37:808-815 刘培启.管内振荡流体流动及泵热分析[A],第十二届全国高等学校过程装备与控制工程专业教学与科研校际交流会,2011,357-360 赵文静.端口夹角对气波引射器性能的影响和预测[J],化工学报,2012,2:572-577 刘培启.自紧影响CNG-2气瓶疲劳寿命的主因探究[J],化工机械,2016,2:224-227,243 杨树斌.超大容积车载LNG气瓶振动特性分析[J],山东化工,2019,48(5):203-206,220 由宏新.车载LNG气瓶尾端支撑结构传热比较[J],压力容器,2017,34(10):20-26