吴利伟 - 天津工业大学 - 纺织科学与工程学院

个人简介

吴利伟，男，博士，讲师，硕士生导师。2014年12月博士毕业于东华大学纺织学院，2015年1月进入天津工业大学纺织学院工作，主要从事纺织结构复合材料力学表征及有限元分析。2016年获批天津市科技特派员。主持国家级科研项目1项，参与国家级和省部级科研项目2项，发表高水平论文16篇，其中SCI论文9篇。教育背景： 2011.9-2014.12，东华大学，纺织材料与纺织品设计，工学博士 2008.9-2011.3 西安工程大学，纺织工程，工学硕士

研究领域

纺织复合材料细观结构建模多尺度连续介质力学性能研究及相关有限元分析柔性复合材料设计

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

1. Liwei Wu, Fa Zhang, Baozhong Sun, Bohong Gu. Finite element analyses on three-point low-cyclic bending fatigue of 3-D braided composite materials at microstructure level, International Journal of Mechanical Sciences, 2014, 84: 41-53. 2. Liwei Wu, Bohong Gu, Baozhong Sun. Finite element analyses of four-step 3-D braided composite braided composite bending damage using repeating unit cell model, International Journal of Damage Mechanics, 2015, 24(1):59-75. 3. Liwei Wu, Baozhong Sun, Bohong Gu. Numerical analyses of bending fatigue of four-step three-dimensional rectangular braided composite materials from unit cell approach. The Journal of the Textile Institute, 2015, 106(1):67-79. 4. Liwei Wu, Bohong Gu. Fatigue behaviors of four-step three-dimensional braided composite material: a meso-scale approach computation, Textile Research Journal, 2014, 84(18): 1915-1930 5. Liwei Wu, Kun Luan, Fa Zhang. Investigation and exploration of a new indoor air filtration material. Applied Mechanics and Materials, 2012, 182: 208-212 6. Liwei Wu, Jianzhong Liu, Jinmei Wang, Study on the Spinning Process of Kevlar Leftovers. TBIS 2010 conference proceedings. 7.吴利伟，王进美，陈志峰. 仿羊绒织物最佳混纺比的探讨. 2011（01），毛纺科技. 8. Qian Jiang, Liwei Wu, Property enhancement of aligned carbon nanotube/polyimide composite by strategic prestraining, 2016,35(4):287-294 9. Fa Zhang, Liwei Wu, Kun Luan. LabVIEW-based data acquisition system for loom performance assessment. Applied Mechanics and Materials, 182-183:392-395, 2012 . 10. Fa Zhang, Liwei Wu, Yumin Wan, Rotich k.Gideon, Bohong Gu, Baozhong Sun. Numerical modeling of the mechanical response of basalt plain-woven composites under high strain rate compression. Journal of Reinforced Plastics and Composites, 2014,33(12),1087-1104 11. Zhenqian Lu, Liwei Wu, Bozhong Sun, Bohong Gu. Numerical simulation of the impact behaviors of shear thickening fluid impregnated warp-knitted spacer fabric. Composites Part B, 2015,69 191-200. 12. 陆振乾，吴利伟，孙宝忠，顾伯洪. 经编间隔织物增强柔性复合材料冲击性能, 复合材料学报. 13. Kun Luan, Fa Zhang, Liwei Wu, Quasi-static tensile properties and damage mechanism of Three-dimensional Angle-interlock Woven Composites. Applied Mechanics and Materials, 182-183:148-152, 2012. 14. Rotich Gideon, Fa Zhang, Liwei Wu, Baozhong Sun, Bohong Gu. Damage behaviors of woven basalt unsaturated polyester laminates under low velocity impact. Journal of Composite Materials, 2015,49(17), 2103-2118 15. Baozhong Sun, Jinhua Wang, Liwei Wu, Fang Fang, Bohong Gu, Computational schemes on the bending fatigue deformation and damage of three-dimensional orthogonal woven composite materials, Computational Materials Science, 2014, 91: 91-101 16.汪金花，方芳，杨格，吴利伟，孙宝忠. 三维正交机织复合材料低周弯曲疲劳力学性能有限元模拟, 复合材料学报. 2014,31(3): 797-802