个人简介
2016.11 至今江苏科技大学材料学院,在站博士后
2016.02-2017.02 英国诺丁汉大学,访问学者
2013.06- 2016.06 昆山捷安特轻合金科技有限公司/东北大学,博士后出站
2007.01- 2008.07 韩国材料研究所,联合培养博士生
2004.08- 2009.06 山东大学,材料加工工程专业,获工学博士学位
1996.09- 2000.06 郑州工业大学,材料科学与工程专业,获工学学士学位
研究领域
一、镁铝双金属复合板的制备、界面结构、力学性能及阻尼性能研究
二、铝合金及其复合材料的成分设计与制备工艺研究
三、双辊铸轧镁合金制备及其塑性变形过程的组织、织构演变及性能研究
四、基于三维石墨烯的超轻三维碳化物纳米材料的制备及表征
近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
1. ZANG Qian-Hao, CHEN Hong-Mei, LAN Fang-Yuan, ZHANG Jing, JIN Yun-Xue. Effect of friction stir processing on microstructure and damping capacity of AZ31 alloy. 中南大学学报(英文版),2017,接收. (通讯作者)
2. 臧千昊, 刘忠明,陈洪美,张静,金云学. 热处理对双辊铸轧 ZK60 镁合金组织及阻尼性能的影响. 稀有金属材料与工程. 2016, 45(6): 1578-1582 (通讯作者) (SCI 四区,IF 0.236)
3. 陈洪美,臧千昊,刘忠明,张静,金云学. T6 处理对双辊铸轧 ZK30-Y镁合金组织与性能的影响. 江苏科技大学学报(自然科学版). 2016, 30(3): 227-231(优先出版)
4. Chen Hongmei, Liu Zhongming, Zang Qianhao, Yu Xin, Zhang Jing and Jin Yunxue. Effect of Heat Treatment on High Temperature Damping Capacity of ZK60 Sheet Produced by Twin-roll Casting and Hot-rolling. Chiang Mai Journals of Science, 2016, 43(2) : 351-357 (SCI , IF 0.418)
5. Zhongming Liu, Hongmei Chen, Weipeng Guo, Jing Zhang and Yunxue Jin. Interface and Damping Capacity of Mg/Al Multilayered Composite Produced by Accumulative Roll Bonding. Materials Science Forum, 2016, 849: 838-843 (通讯作者) (EI 收录)
6. Chen Hongmei, Zang Qianhao, Yu Hui, Zhang Jing, Jin Yunxue. Effect of Intermediate Annealing on the Microstructure and Mechanical Property of ZK60 Magnesium Alloy Produced by Twin Roll Casting and Hot Rolling. Materials Characterization, 2015, 106: 437-441 (SCI 三区, IF 2.383)
7. Hongmei Chen, Qianhao Zang, Jing Zhang, Jaehyung Cho, Yunxue Jin and Yuke Shi. Effect of Heat Treatment on Microstructure and Damping Capacity of Twin Roll Cast ZK60 Strip, Magnesium Technology 2015, 2015: 267-271 (EI 收录)
8. 陈洪美, 臧千昊, 张静, 金云学. 项宏福. 冷轧TC4钛合金管材的织构研究. 特种铸造及有色合金. 2015, 35(10): 1012-1015
9. Jing Zhang, Hongmei Chen, Hui Yu and Yunxue Jin. Study on Dual Modification of Al-17%Si Alloys by Structural Heredity. Metals, 2015, 5:1112-1126 (SCI 四区,IF 1.574)
10. Q. H. Zang, H. M. Chen, J. Zhang, J. H. Cho, Y. X. Jin and Y. K. Shi. Effect of hot rolling on microstructure and damping capacity of Twin Roll Cast ZK60 alloy. Materials Research Innovations, 2015, 19(S4): S102-105. (通讯作者) (SCI 收录)
11. Zang Qianhao, Shi Yuke, Chen Hongmei, Zhang Jing and Jin Yunxue. Effect of Annealing Temperature on Microstructure and Damping Capacity of Twin Roll Cast ZK60 Alloy. Advanced Materials Research, 2015,1095: 87-90. (通讯作者)
12. Jing Zhang, Huashun Yu, Xinting Shuai, Hongmei Chen and Guanghui Min. Preparation of Al2O3/Al-Si Composites by In-situ Reaction of Fe2O3+MnO2/Al System. Materials Science Forum, 2015, 816:48-53 (EI 收录)
13. Hongmei Chen, Huashun Yu, Guanghui Min, Yunxue Jin, Study on the Microstructure and Texture of Warm Rolled ZK60 Magnesium Alloy Sheet, Advanced Materials Research, 2012,557-559: 1344-1348. (EI 收录)
14. Chen Hongmei, Yu Huashun, Kang Suk Bong, Min Guanghui, Jin Yunxue. Effect of forming process on microstructure and mechanical properties of ZK60 alloy sheet. 稀有金属材料与工程, 2011, 40(10): 1708-1712. (SCI 四区, IF 0.236)
15. CHEN Hong-mei, YU Hua-shun, KANG Suk-bong, Min Guang-hui, JIN Yun-xue.Effect of Rolling Temperature on Microstructure and Texture of Twin Roll Cast ZK60 Magnesium Alloy. Transactions of Nonferrous Metals Society of China, 2010, 20(11): 2086-2091 (SCI 四区, IF 1.34)
16. Hongmei Chen, Huashun Yu ,Suk Bong Kang, Guanghui Min. Texture development in a twin roll cast and warm rolled ZK60 magnesium alloy. In: S.R. Agnew, N.R. Neelameggham, E.A. Nyberg, and W.H. Sillekens, ed. Magnesium Technology 2010. Warrendale, Pennsylvania: TMS 2010:559-562 (EI 收录)
17.Hongmei Chen, Huashun Yu, Suk Bong Kang, Jae Hyoung Cho, Guanghui Min, Optimization of annealing treatment parameters in a twin roll cast and warm rolled ZK60 alloy sheet, Materials Science and Engineering A, 2010, 527(4-5):1236-1242 (SCI 二区, IF 2.647)
18.Hongmei Chen, Huashun Yu, Suk Bong Kang, Guanghui Min, Optimization of annealing treatment parameters in a twin roll cast and warm rolled Mg-4.5Al-1.0Zn alloy, Advanced Materials Research, 79-82 (2009), 2139-2142 (EI 收录)
19.Hongmei Chen, Suk Bong Kang, Huashun Yu, Jaehyung Cho, Hyoung Wook Kim, Guanghui Min. Effect of heat treatment on microstructure and mechanical properties of twin roll cast and sequential warm rolled ZK60 alloy sheets, Journal of Alloys and Compounds, 2009, 476(1-2): 324-328 (SCI 二区, IF 3.014)
20.Hongmei Chen, Suk Bong Kang, Huashun Yu, Hyoung Wook Kim, Guanghui Min. Microstructure and mechanical properties of Mg-4.5Al-1.0Zn alloy sheets produced by twin roll casting and sequential warm rolling. Materials Science and Engineering A,2008, 492(1-2): 317–326 (SCI 二区, IF 2.647)