施建平 - 南京师范大学 - 电气与自动化工程学院

个人简介

2014.03-2018.06：东南大学机械工程学院，机械制造及其自动化，工学博士 2006.09-2013.06：南京师范大学电气与自动化工程学院，本科/硕士。

研究领域

3D打印（生物、金属方向）、硬件控制系统、嵌入式控制、机器人控制技术、外骨骼助力

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

[1] Shi Jianping, Yang Jiquan, Li Zongan, et al. Design and fabrication of graduated porous Ti-based alloy implants for biomedical applications[J]. Journal of Alloys & Compounds, 2017, 728. ( SCI) [2] Shi Jianping, Zhu Liya, Li Zongan, Yang Jiquan, et al. A design and fabrication method for a heterogeneous model of 3D bio-printing[J]. IEEE Access, 2017, 5:5347-5353. (SCI) [3] Shi Jianping, Yang Jiquan, Zhu Liya, et al. A porous scaffold design method for bone tissue engineering using triply periodic minimal surfaces[J]. IEEE Access, 2017, PP(99):1-1. (SCI) [4] Shi Jianping, Zhu Liya, Li Lan, Yang Jiquan, et al. A TPMS-based method for modeling porous scaffolds for bionic bone tissue engineering [J]. Scientific Reports. (SCI) [5] Tang Wenlai ; Shi Jianping(*), Elasto-inertial particle focusing in 3D-printed microchannels with unconventional cross sections, Microfluid and Nanofluid, 2019.2.21, 23: 42~52 [6] 施建平, 杨继全, 王兴松. 多材料零件3D打印技术现状及趋势[J]. 机械设计与制造工程, 2017(2):11-17. [7] Li Lan, Yu Fei, Shi Jianping, et al. In situ repair of bone and cartilage defects using 3D scanning and 3D printing.[J]. Scientific Reports, 2017, 7(1). (SCI, IF = 4.259) [8] Shi Jianping, Liu Tingting, Li Kelou, et al. A Design and Fabrication Method for Bone Defects Repairing Using 3D Printing. International Symposium on Engineering and Applied Science (ISEAS), Osaka, Japan, 14-16 August, 2017