近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
1. Lei Li, Chunyan Ban, Xuchen Shi, Haitao Zhang, Yubo Zuo, Qingfeng Zhu, Xiangjie Wang, Jianzhong Cui, Hiromi Nagaumi, Influence of a high magnetic field on the solidification structures of ternary Al–Fe–Zr alloy, Journal of Materials Research, DOI: https://doi.org/10.1557/jmr.2017.2, 1-10.
2. Lei Li, Chunyan Ban, Xuchen Shi, Haitao Zhang, Yubo Zuo, Qingfeng Zhu, Xiangjie Wang, Hui Zhang, Jianzhong Cui, Hiromi Nagaumi, Effects of a high magnetic field on the primary zinc-rich crystals in hypoeutectic Zn-Sn alloy, Journal of Crystal Growth, 463:59–66.
3. Lei Li, Chunyan Ban, Xuchen Shi, Haitao Zhang, Minghui Cai, Haitao Liu, Jianzhong Cui, Hiromi Nagaumi, Crystallographic growth pattern of zinc-rich plate-like cells under a high magnetic field, Materials Letters, 185: 447–451.
4. Yi Xu, Hiromi Nagaumi*,Yi Han,KeMa,ShijieGuo, Gongwang Zhang, HaitaoZhang, TongguangZhai “The Deformation Behavior and Microstructure Evolution of a Mn- and Cr-Containing Al-Mg-Si-Cu Alloy During Hot Compression and Subsequent Heat Treatment”, Metallurgical and Materials Transactions A, 48(3),(2017) 1355-1365.
5. Xiao-xiong Luo, Hai-tao Zhang, Xing Han, Shi-jie Guo3, Dan-dan Chen, Jian-zhong Cui, and Hiromi Nagaumi: Development of inclusions in 3104 alloy melt during heating and holding treatments, International Journal of Minerals, Metallurgy and Materials, 23 (6) 2016, 637-644.
6. Yan Jin, Pei Cai, Wei Wen, Hiromi Nagaumi, Bin Xu, Yuanbin Zhang, Yongguang Zhai:The anisotropy of fatigue crack nucleation in an AA7075 T651 Al alloy plate, Materialia Science and Eegineering A, 622 (2015) 7-15.
7. Shi-jie Guo, Yi Xu, Yi Han, Jin-yan Liu, Guan-Xia Xue, Hiromi Nagaumi: Near net shape casting process for producing high strength 6xxx aluminum alloy automobile suspension parts, Trans. Nonferrous Met. Soc. China 24(2014)2393-2400.
8. Yi Han, Ke Ma, Lian Li, Wei Chen, Hiromi Nagaumi: Study on microstructure and mechanical properties of Al–Mg–Si–Cu alloy with high manganese content, Materials and Design 39 (2012) 418–424
9. Umeda, T, Thirathipviwat, P, Supradist, M, Nagaumi H: Microsegregation development of heavily electromagnetically stirred melt of super high strength Al-10Zn-2·5Mg-2·3Cu alloy, International Journal of Cast Metals Research. 24, (2011) 1364-0461.
10. H.Nagaumi, S.Suzuki, T. Okane and T. Umeda: Hot Tearing of Machinability Improved 2xxx Aluminum Alloy of High Tin Content with Manganese and Chromium Addition, Materials Transactions., 49, (2008), p 324-330.
11. K. Kaekwan, T. Pramote, S. Mawin, H. nagaumi and T. Umeda: Microstructures of super high strength Al-10Zn-2.5Mg-2.3Cu-0.14Zr alloys under electromagnetically stirred direct chill casting, International Journal of Cast Metals Reserch, 21, (2008)
12. Y. Zuo, H. nagaumi and J. Z. Cui: Study on the sump and temperature field during low frequency electromagnetic casting a superhigh strength Al–Zn–Mg–Cu alloy, Materials Processing Technology, 197, (2008), p 109-118.
13. Chaijaruwanich, A, Lee, PD, Dashwood, RJ, Youssef, YM, Nagaumi, H: Evolution of pore morphology and distribution during the homogenization of direct chill cast Al-Mg alloys, ACTA MATER, 2007, Vol: 55, Pages: 285 - 293, ISSN: 1359-6454.
14. H. Zhang, H. Nagaumi and J. Cui: Coupled modeling of electromagnetic field, fluid flow, heat transfer and solidification during low frequency electromagnetic casting of 7xxx aluminum alloys Part 2: The effects of electromagnetic parameterson casting processes, Materialia Science and Eegineering A,448 (2007) 177-188.
15. H. Zhang, H. Nagaumi and J. Cui: Coupled modeling of electromagnetic field, fluid flow, heat transfer and solidification during low frequency electromagnetic casting of 7xxx aluminum alloys Part 1: Development of a mathematical model and comparison with experimental results, Materialia Science and Eegineering A,448 (2007) 189-203.
16. A. Chaijaruwanich, R. J. Dashwood, P. D. Lee and H. Nagaumi: Pore evolution in an Al-6wt%Mg alloy during hot rolling, Acta Materialia. 54 (2006), 5185-5194.
17. Y. M. Youssef, A. Chaijaruwanich, R. W. Hamilton, H. Nagaumi, R. J. Dashwood and P. L. Lee: X-ray microtomographic characterisation of pore evolution during homogenisation and rolling of Al-6Mg, Materials Science and Technology, 22-9 (2006), 1087-1093.
18. Z.H. Zhao, J.Z.CUI, H. Nagaumi: Effect of low-frequency magnetic fields on microstructures of horizontal direct chill casting 2024 aluminum alloy, Materials Transactions., 46-8 (2005), 1903-1907.
19. P. D. Lee, R.C.Atwood, R.J. Dashwood, H. Nagaumi: Modeling of Porosity Formation in Direct Chill Cast Aluminum-Magnesium Alloys, Materialia Science and Eegineering A328 (2002) 213-222.
20. H. Nagaumi: Prediction of Porosity Contents and Examination of Porosity Formation in Al-4.4%Mg DC Slab, Science and Technology of Advanced Materials. 2 (2001) 49-57.
京公网安备 11010802027423号