杨树峰 - 北京科技大学 - 冶金与生态工程学院

个人简介

2001.09-2005.07，西安建筑科技大学，本科 2005.09-2011.1，北京科技大学，硕博连读，博士 2011.02-2012.06，美国密苏里科技大学，博士后 2012.07-2015.07，北京科技大学副，讲师 2015.07-今，北京科技大学，副教授【主要学术成就】主要从事洁净钢冶炼、钢中非金属夹杂物控制和高温合金冶炼等方面的研究。国家自然基金委优秀青年基金获得者，第一作者和通讯作者发表SCI收录论文40余篇，其中11篇发表在冶金类国际权威期刊《Metallurgical and Materials Transactions B》上，单篇文章被引最高46次。曾获教育部和天津市科技进步二等奖和第四届全国冶金高校院长奖。主持国家自然科学基金优秀青年基金项目1项、面上项目1项、青年项目1项，主持企业合作课题14项。目前兼任中国金属学会电冶金分会副秘书长。

研究领域

（1）钢中非夹杂物的控制；（2）高温合金冶炼；（3）炉外精炼。

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

[1] Liu, Wei; Tang, Haiyan; Yang, Shufeng , et al Numerical Simulation of Slag Eye Formation and Slag Entrapment in a Bottom-Blown Argon-Stirred Ladle[J]. Metallurgical and Materials Transactions B, 2018, 49(5): 2681-2691. [2] Zhou, Yutao; Yang, Shufeng; Li, Jingshe, Effects of Heat-Treatment Temperature on the Microstructure and Mechanical Properties of Steel by MgO Nanoparticle Additions[J]. MATERIALS, 2018, 11(9): 1707 [3] Wang L, Li J, Yang Shufeng , et al. Nucleation and Ostwald Growth of Particles in Fe-O-Al-Ca Melt[J]. Scientific reports, 2018, 8(1): 1135. [4] Zhang X, Yang Shufeng , Liu C, et al. Effect of Heat-Treatment Temperature on the Interfacial Reaction Between Oxide Inclusions and Si-Mn Killed Steel[J]. JOM, 2018, 70(6),958-962 [5] Zhang X, Yang S , Liu C , et al. Interfacial reaction between oxide inclusion and steel matrix deoxidized by Si and Mn at 1473 K[J]. Journal of Iron and Steel Research International, 2018,25(1): 1-8 . [6] Guo, Hao; Yang, Shufeng; Li, Jingshe, et al. Effects of Surface-Modified MgO Nanoparticles on Inclusion Characteristics and Microstructure in Carbon Structural Steel [J].JOM, 2018, 70(7),1136-1142 [7] Chen, Zhengyang; Yang, Shufeng; Li, Jingshe, Effects of Different Hot Working Techniques on Inclusions in GH4738 Superalloy Produced by VIM and VAR [J]. MATERIALS, 2018, 11(6): 1024 [8] Yang, Shufeng; Zhao, Mengjing; Feng, Jie. Induced-Pitting Behaviors of MnS Inclusions in Steel[J]. High Temperature Materials and Processes, 2018 37(9): 1007-1016. [9] Shi, Weining; Yang, Shufeng; Li, Jingshe, et al. Correlation between evolution of inclusions and pitting corrosion in 304 stainless steel with yttrium addition[J]. Scientific reports, 2018, 8(5): 4830 [10] Wang, Yang; Yang, Shufeng; Li, Jingshe. Dephosphorization by Double-Slag Process in Converter Steelmaking[J]. High Temperature Materials and Processes, 2018 37(7): 625-633. [11] Yang Shufeng, Zhao M, Li J, et al. Removal of Zinc and Lead from Blast Furnace Dust in a Fluidized-Bed Roaster. Journal of Sustainable Metallurgy, 2017, 3(3): 441-449. [12] Liao H, Yang Shufeng , Li J, et al. Characteristics of Non-metallic Inclusions in Steel Obtained from Different-Sized Samplers. Metallurgical and Materials Transactions B, 2017, 48(6): 3101-3108. [13] Liu Q, Yang Shufeng , Zhao M, et al. Pitting Corrosion of Steel Induced by Al2O3 Inclusions. Metals, 2017, 7(9): 347. [14] Wang L, Yang Shufeng , Li J, et al. Effect of Mg Addition on the Refinement and Homogenized Distribution of Inclusions in Steel with Different Al Contents. Metallurgical and Materials Transactions B, 2017, 48(2): 805-818. [15] Gao X, Yang Shufeng , Li J, et al. Inclusion characteristics and microstructure properties under different cooling conditions in steel with nanoparticles addition. Ironmaking & Steelmaking, 2017: 1-7. [16] Liu C, Yang Shufeng , Li J, et al. The Influence of FeO on the Reaction between Fe–Al–Ca Alloy and Al2O3–CaO–FeO Oxide during Heat Treatment at 1473 K. Metals, 2017, 7(4): 129. [17] Liu C, Yang Shufeng , Li J, et al. Solid-State Reaction Between Fe-Al-Ca Alloy and Al2O3-CaO-FeO Oxide During Heat Treatment at 1473 K (1200℃)[J]. Metallurgical and Materials Transactions B, 2017, 48(2): 1348-1357. [18] Liu W, Yang S, Li J, et al. Numerical Model of Dephosphorization Reaction Kinetics in Top Blown Converter Coupled with Flow Field[J]. High Temperature Materials and Processes, 2017, 36(6): 599-605. [19] C Chen, X Yang, J Li, X Lu, S Yang. Direct Electrolytic Reduction of Solid Ta2 O5 to Ta with SOM Process[J]. Metallurgical and Materials Transactions B, 2016, 47(3): 1727-1735. [20] Wang Y, Yang Shufeng , Li J, et al. Cyclic Use of Ladle Furnace Refining Slag for Desulfurization[J]. Journal of Sustainable Metallurgy, 2017, 3(2): 274-279.