个人简介
本科及以上学位： 2004.09 – 2010.07，北京科技大学，机械工程学院，热能工程专业，获博士学位 2000.09 – 2004.7，北京科技大学，机械工程学院，热能工程专业，获学士学位 工作至今的经历： 2010.10 – 2012.11，北京科技大学，机械工程学院，博士后，讲师 2015.02 – 2015.08，加拿大英属哥伦比亚大学，材料科学，访问学者 2013.02 – 2016.07，北京科技大学，机械工程学院，热科学与能源工程系，讲师 2016.07 – 至今，北京科技大学，能源与环境工程学院，热科学与能源工程系，副教授
近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
(1)Ruifeng Dou, A. B. Phillion*. Application of a pore fraction hot tearing model to directionally solidified and direct chill cast aluminum alloys. Metallurgical and Materials Transactions A, 2016, 47A: 4217-4225.
(2)Peipei Yang, Zhi Wen, Ruifeng Dou*, Xunliang Liu. Effect of random structure on permeability and heat transfer characteristics for flow in 2D porous medium based on MRT lattice Boltzmann method. Physics Letters A, 2016, (380): 2902-2911.
(3)Ruifeng Dou*, Tianran Ge, Xunliang Liu, Zhi Wen, Effects of contact pressure, interface temperature, and surface roughness on thermal contact conductance between stainless steel surfaces under atmosphere condition, International Journal of Heat and Mass Transfer, 2016, (94): 156-163.
(4)Ruifeng Dou*, Zhi Wen, Gang Zhou, 2D axisymmetric transient inverse heat conduction analysis of air jet impinging on stainless steel plate with finite thickness, Applied Thermal Engineering, 2016, (93): 458-457.
(5)Ruifeng Dou*, Zhi Wen, Gang Zhou, Heat transfer characteristics of water spray impinging on high temperature stainless steel plate with finite thickness, International Journal of Heat and Mass Transfer, 2015, (90): 376-387.
(6)Ruifeng Dou*, Zhi Wen, Gang Zhou, Xunliang Liu, Xiaohong Feng, Experimental study on heat-transfer characteristics of circular water jet impinging on high-temperature stainless steel plate, Applied Thermal Engineering, 2014, (62): 738-746.
(7)豆瑞锋，温治，周钢，刘训良*，冯霄红，罗建枫，水射流冲击冷却过程靶面热流密度测试方法的改进，北京科技大学学报，2013，35(12)：1653 ~ 1658. (Ruifeng Dou, Zhi Wen, Gang Zhou, Xunliang Liu*, Xiaohong Feng, Jianfeng Luo. Improvement of measurement methods for surface heat flux under water jet impinging. Journal of University of Science and Technology Beijing, 2013, 35(12): 1653 ~ 1658)
(8)豆瑞锋，温治*，董斌，程淑明，冯霄红，李志，基于可行工况集的带钢连续热处理过程优化策略，北京科技大学学报，2012，34(8)：943 ~ 951. (Ruifeng Dou, Zhi Wen*, Bin Dong, Shuming Cheng, Xiaohong Feng, Zhi Li. Optimization strategies of steel strip continuous heat treatment based on feasible sets, Journal of University of Science and Technology Beijing, 2012, 34(8): 943 ~ 951)
(9)Yang Peipei, Wen Zhi, Dou Ruifeng*, Chen Yuqin, Double MRT-lattice Boltzmann model for simulating impinging jet flow and heat transfer, International Journal of Heat and Mass Transfer, 2015, (86): 302-308.
(10)杨培培，温治，豆瑞锋*，罩式退火炉热过程数学模型与实验验证，中南大学学报（自然科学版），2015，46(4)：1518-1526. (Peipei Yang, Zhi Wen, Ruifeng Dou*. Thermal process mathematical model and experimental verification in Bell-type annealing furnace. Journal of Central South University (Science and Technology), 2015, 46(4): 1518-1526)
(11)Xiong Zhang, Zhi Wen, Ruifeng Dou*, Gang Zhou, Fan Zhang, Experimental study of the air-atomized spray cooling of high-temperature metal, Applied Thermal Engineering, 2014, (71): 43-55.
(12)Xiong Zhang, Zhi Wen, Ruifeng Dou*, Gang Zhou, Zhiqiang Li, Evolution of microstructure and mechanical properties of cold-rolled SUS430 stainless steel during a continuous annealing process, Materials Science and Engineering A, 2014, (598): 22-27.
(13)张雄，温治，豆瑞锋*，周钢，李志强，退火温度对430不锈钢冷轧板组织和力学性能的影响，北京科技大学学报，2014，36(12)：1650-1655. (Xiong Zhang, Zhi Wen, Ruifeng Dou*, Gang Zhou, Zhiqiang Li. Effect of annealing temperature on the microstructure and mechanical properties of cold-rolled 430 stainless steel. Journal of University of Science and Technology Beijing, 2014, 36(12): 1650-1655)
(14)王乃帅，张雄，温治，豆瑞锋*，430不锈钢冷轧板高温退火过程中再结晶织构的定量分析，北京科技大学学报，2014，36(5)：632-638. (Naishuai Wang, Xiong Zhang, Zhi Wen, Ruifeng Dou*. Quantitative analysis of the recrystallized textures of cold-rolled 430 stainless steel during high-temperature annealing. Journal of University of Science and Technology Beijing, 2014, 36(5): 632-638)
(15)张雄，温治，豆瑞锋*，张瑞杰，李志强，430不锈钢冷轧板再结晶组织演变以及动力学模型，材料热处理学报，2014，(01)：212-216. (Xiong Zhang, Zhi Wen, Ruifeng Dou*, Ruijie Zhang, Zhiqiang Li. Recrystallization kinetics and microstructure evolution during annealing of cold rolled 430 stainless steel. Transactions of Materials and Heat Treatment, 2014, (01): 212-216)
(16)方旭，温治，豆瑞锋，周钢，庄惟琦. 热轧不锈钢带卧式连续退火炉加热过程数值模拟，冶金自动化，2011.09，35(5)：43-47，64. (Fang Xu, Wen Zhi, Dou Ruifeng, Zhou Gang, Zhuang Weiqi. Numerical simulation of heating process in horizontal continuous annealing furnace of hot-rolled stainless steel strip. Metallurgical Industry Automation, 2011.09, 35(5): 43-47, 64)
(17)Peipei Yang, Zhi Wen, Ruifeng Dou. Heating process simulation of steel coil in Bell-type annealing furnace. Heat transfer—Asian Research, 2016, 45(8): 714-729
京公网安备 11010802027423号