陶劲松 - 华南理工大学 - 轻工科学与工程学院

个人简介

陶劲松，男，1976年生，博士/副研究员；纤维先进材料和造纸节能与优化，具体包括绿色纳米材料、纤维柔性电子新材料、纤维生物医学材料、功能纸张、造纸节能减排和过程优化等。主持了国家级和省级项目多项，如国家自然科学基金项目（20906030，结题）、广东省自然科学基金（10151064101000055，结题）、中央高校基本科研业务费自主选题项目（2011ZM0100，结题）、广东省科技计划项目（2013B010406003，结题）、制浆造纸工程国家重点实验室基金（2014C17）等；参与国家973重点基础研究发展计划项目等。

研究领域

纤维先进材料；造纸节能与优化

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

1.J Tao, X Long, Z Li, G Ying. Reusing tissue paper mill effluent water as corrugated paper mill intake water: Case study of a new clean production measure, Environmental Progress & Sustainable Energy 2017, 10.1002/ep.12747 (SCI IF=1.672) 2.J Tao, Z Li, X Peng, G Ying. Quantitative analysis of impact of green stormwater infrastructures on combined sewer overflow control and urban flooding control. Frontiers of Environmental Science & Engineering, 2017, 11 (4), 11(SCI IF =1.716) 3.J Tao, Z Fang, Q Zhang, W Bao, M Zhu, Y Yao, Y Wang, J Dai, A Zhang, C Leng, D Henderson, Z Wang, L Hu*. Super-Clear Nanopaper from Agro-Industrial Waste for Green Electronics. Advanced Electronic Materials, 2017, 3(5): 1600539 (SCI IF =4.193) 4.Yonggang Yao†, Jingsong Tao†, Jianhua Zou†, Bilun Zhang, Junbiao Peng*, Liangbing Hu*, etc. Light management in plastic-paper hybrid substrate towards high-performance optoelectronics, Energy Environ. Sci., 2016, 9, 2278-2285 DOI:10.1039/C6EE01011C(SCI IF = 29.518) 5.Tao Jingsong, Liu Huanbin. A method to determine sheet relative bonded area using the fiber flexibility index, Instrumentation Science & Technology, 2011,6:161-172 (SCI IF =0.874) 6.Kung Lingbo, Liu Huangbin, Li Jigeng，Tao Jingsong, etc. Waste Heat Integration of Coating Paper Machine Drying Process. Drying Technology, 2011,29(4):442-450 (SCI IF =2.804) 7.Li Yugang, Liu Huanbin, Li Jigeng，Tao Jingsong, etc. Process Parameters Optimization for Energy Saving in Paper Machine Dryer Section. Drying Technology, 2011,29(8):910-917 (SCI IF =2.804) 8.Tao Jingsong, Li Jigeng, Liu Huanbin, etc. Energy and Exergy Measurement for Papermaking Processes, Measurement & Control, 2010, 43(4):116-119 (SCI IF =0.772) 9.LI Yuan-hua,Tao Jing-song*, Liu Huan-bin, etc., Building predicting model of paper tensile strength based on partial least-squares approach, CIESC, 2014, 65(9):3544-3550 (EI) 10.Tao Jing-song*, Yan Yafan, Li Yuanhua, Comparison of Paper Tensile Strength Prediction Models Based on PLS and SVM Methods, Journal of South China University of Technology, 2014, 42(7):132-137 (EI) 11.Li Yugang, Liu Huanbin, Li Jigeng，Tao Jingsong*, etc. Simultaneous module-based optimization of operation parameters of dryer section in paper machine Journal of South China University of Technology (Natural Science) ,2011,39 (3):8-12 (EI) 12.Tao Jingsong, Liu Huanbin. Study on modeling sheet tensile strength based on papermaking process parameters, Journal of Basic Science and Engineering, 2010, V18, NSUPPL, P41-51 (EI)