当前位置: X-MOL首页全球导师 国内导师 › 王艳

个人简介

2009年4月毕业于上海交通大学微纳米科学技术研究院,获微电子学与固体电子学博士学位,毕业后留校工作。主要从事微加工工艺和MEMS器件方面的研究工作。作为主要研究人员,先后参加了国家863计划课题“非硅表面微加工及柔性衬底技术”、国家自然科学基金“基于碳纳米管植布工艺的场发射阴极制备技术研究”、上海市科委“基于电化学微加工CNT场发射阴极制备及其示范应用”等项目的研究工作。并参与了国家自然科学基金“肾小球滤过膜人工模拟的初步探索”的金属医用微结构支架外协加工工作。主要涉及的研究内容包括MEMS器件的仿真设计和微加工工艺探索,共在国内外核心期刊上发表文章13篇,其中第一作者英文文章4篇,SCI收录3篇。

研究领域

微加工技术 微通道散热器 碳纳米管修饰电极

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

WangYan, Guifu Ding, Shi Fu, “Highly efficient manifold microchannel heatsink”, Electronics Letters, v 43, n 18, 2007, p 978-980 WangYan, Guifu Ding, “A microchannel heat sink with unitary circular flow and short distance heat transfer mode: Design and analysis” Proceedings of the International Conference on Integration and Commercialization of Micro and Nanosystems 2007, v A, Proceedings of the International Conference on Integration and Commercialization of Micro and Nanosystems 2007, 2007, p 747-750 WangYan, Guifu Ding, “Numerical analysis of heat transfer in a manifold microchannel heat sink with high efficient copper heat spreader”, Microsystem Technologies, 14(2008),389-395 WangYan, Guifu Ding, “Experimental investigation of heat transfer performance for a novel microchannel heat sink”, Journal of Micromechanics and Microengineering, 18 (2008) 035021 (8pp) Min Deng, Guifu Ding , WangYan, Huiqing Wu, Yuanjin Yao, Lida Zhu. Fabrication of Ni-matrix carbon nanotube field emitters using composite electroplating and micromachining. C A R B ON 4 7 ( 2 0 0 9 ) 3 4 6 6 –3 4 7 1 (IF 4.373) Min Deng, Guifu Ding, WangYan, Hong Wang, Shi Fu. MEMS-based carbon nanotube and carbon nanofiber Cu micro special electric contact .J. Micromech. Microeng. 19 (2009) 065001 (8pp) (IF2.233) Min Deng, Guifu Ding, WangYan, Hong Wang. Mass production of triode-type carbon nanotube field emission micro-cathode arrays using composite electroplating and micromachining at room temperature. C A R B ON ( Revised)

推荐链接
down
wechat
bug