陈远流 - 浙江大学 - 机械工程学院

个人简介

2009年、2014年分别获浙江大学工学学士、工学博士学位（中日联合培养）。2014年-2015年在日本东北大学从事博士后研究，2015年-2016年在日本东北大学担任日本学术振兴会（JSPS）外国人特别研究员，2016年-2018年担任日本东北大学精密机械学系副教授。2018年3月起放弃日本教职回国工作，受聘浙江大学“研究员（自然科学A类）、博士生导师。主要研究领域包括超精密加工/测量技术及装备、先进检测技术与控制、微纳制造、智能精密机电系统等。2013年获日本机械工程学会（JSME）青年研究学者奖，2015年获日本学术振兴会（JSPS）奖学金（外国人特别研究员），2016年获国际纳米制造学会（ISNM）最佳论文奖，2018年获日本精密工程学会（JSPE）沼田纪念奖

研究领域

智能精密微纳制造精密机电系统集成与控制先进功能表面的制造、操控与测量新型驱动方式的界面机理与技术应用

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Y.L. Chen, Y. Xu, Y. Shimizu, H. Matsukuma and W. Gao. High quality-factor quartz tuning fork glass probe used in tapping mode atomic force microscopy for surface profile measurement. Measurement Science and Technology. 2018. Accepted and In Press. doi.org/10.1088/1361-6501/aab998 Y. L. Chen, Y. Machida, Y. Shimizu, H. Matsukuma and W. Gao. A stitching linear-scan method for roundness measurement of small cylinders. CIRP Annals-Manufacturing Technology. 2018. Accepted and In Press. Y.L. Chen, Z. Niu, D. Matsuura, J.C. Lee, Y. Shimizu, W. Gao, J.S. Oh and C.H. Park. Implementation and verification of a four-probe motion error measurement system for a large-scale roll lathe used in hybrid manufacturing. Measurement Science and Technology. 28 (2017) 105004. Y.L. Chen, Y. Cai, M. Xu, Y. Shimizu and W. Gao. An edge reversal method for precision measurement of cutting edge radius of single point diamond tools. Precision Engineering. 50 (2017), 380-387. Y.L. Chen, Y. Cai, K. Tohyama, Y. Shimizu and W. Gao. Auto-tracking single point diamond cutting on non-planar brittle material substrates by a high-rigidity force controlled fast tool servo. Precision Engineering. 49 (2017), 253-261. Y.L. Chen, J. Tamada, Y. Kudo, S. Madokoro, K. Nakamura and W. Gao. Optical frequency domain angle measurement in a femtosecond laser autocollimator. Optics Express.25 (2017), 16725-16738. Y.L. Chen, Y. Shimizu, Y. Kudo, S. Ito and W. Gao. Mode-locked Laser Autocollimator with an Expanded Measurement Range. Optics Express. 24, 14(2016), 15554-15569. Y.L. Chen, S. Ito, H. Kikuchi, Y. Shimizu, W. Gao. On-line qualification of a micro probing system for precision length measurement of micro-features on precision parts. Measurement Science and Technology. 27 (2016): 074008. Y.L. Chen, Y. Cai, Y. Shimizu, S. Ito, W. Gao, B. F. Ju. Ductile cutting of silicon microstructures with surface inclination measurement and compensation by using a force sensor integrated single point diamond tool. Journal of Micromechanics and Microengineering 26 (2015): 025002. Y.L. Chen, Y. Cai, Y. Shimizu, S. Ito, W. Gao, B. F. Ju. On-machine measurement of microtool wear and cutting edge chipping by using a diamond edge artifact. Precision Engineering 43 (2015): 462-467. Y.L. Chen, Y. Shimizu, S. Wang, S. Ito, B.F. Ju，W. Gao. Self-evaluation of the cutting edge contour of a micro diamond tool with a force sensor integrated fast tool servo on an ultra-precision lathe. International Journal of Advanced Manufacturing Technology 77 (2015): 2257-2267. Y.L. Chen, S. Wang, Y. Shimizu, S. Ito, W. Gao, B.F. Ju. An in-process measurement method for repair of defective microstructure by using a fast tool servo with a force sensor. Precision Engineering. 39 (2015): 134-142. Y.L. Chen, W.L. Zhu, S. Yang, B.F. Ju, Y. Ge. Large-area profile measurement of sinusoidal freeform surfaces using a new prototype scanning tunneling microscopy. Precision Engineering. 38 (2014): 414-420. Y.L. Chen, W. Gao, B.F. Ju, Y. Shimizu, S. Ito. A measurement method of cutting tool position for relay fabrication of microstructure surface. Measurement Science and Technology. 25 (2014): 064018. Y. Cai, Y.L. Chen, M. Xu, Y. Shimizu, S. Ito, H. Matsukuma, W. Gao. An ultra-precision tool nanoindentation instrument for replication of single point diamond tool cutting edges. Measurement Science and Technology, 29 (2018): 054004. Z. Niu, Y.L. Chen, Y. Shimizu, H. Matsukuma and W. Gao. Error Separation Method for Precision Measurement of the Run-Out of a Microdrill Bit by Using a Laser Scan Micrometer Measurement System. Journal of Manufacturing and Materials Processings. 2(2018), 4. Y. Cai, Y.L. Chen, Y. Shimizu, S. Ito, W. Gao. Molecular dynamics simulation of subnanometric tool-workpiece contact on a force sensor-integrated fast tool servo for ultra-precision microcutting. Applied Surface Science, 369 (2016): 354–365. Y. Cai, Y.L. Chen, Y. Shimizu. MD simulation of elastic-plastic transition associated with tool-workpiece contact in FS-FTS. Journal of Engineering Manufacture, (2016), in press. Z. Niu, Y.L. Chen, D. Matsuura, J.C. Lee, R. Kobayashi, Y. Shimizu, S. Ito, W. Gao, J.S. Oh and C.H. Park. Precision Measurement of Z-Slide Vertical Error Motion of an Ultra-Precision Lathe by Using Three-probe Method.International Journal of Precision Engineering and Manufacturing. 18 (2017): 651-660. S. Ito, Y.L. Chen, Y. Shimizu, et al. Uncertainty analysis of slot die coater gap width measurement by using a shear mode micro-probing system. Precision Engineering. 43 (2016): 525-529.