宋小文 - 浙江大学 - 机械工程学院

个人简介

1989年7月毕业于复旦大学数学系计算数学专业，获理学学士学位。 1992年7月毕业于浙江大学应用数学系计算几何与图形学专业，获理学硕士学位。 1996年3月毕业于浙江大学机械系机械制造专业，获工学博士学位。 1996年留校任教于浙江大学，历任讲师、副教授、教授。 2001.11~2003.2 美国 Brigham Yang University 计算机系，高级访问学者。

研究领域

工程机械广义优化设计动力机械(含车辆)数字化设计及外流场调控虚拟现实仿真平台及其应用复合材料构件设计制造及性能优化

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Song, XW*; Zhang MX(2019) Turbulent Drag Reduction Characteristics of Bionic Nonsmooth Surfaces with Jets Applied Sciences. 9(23):5070 DOI: 10.3390/app9235070 IDS Number: ISSN : 2076-3417 (Print) Subject Category: Song, XW*; Qi, YC; Zhang MX; Zhang GG; Zhan WC (2019) Application and optimization of drag reduction characteristics on the flow around a partial grooved cylinder by using the response surface method Engineering Applications of Computational Fluid Mechanics. 13(1):158-176 DOI: 10.1080/19942060.2018.1562382 IDS Number: HG5AE ISSN : 1994-2060 (Print) 1997-003X (Online) Subject Category: Engineering; Mechanics Song, XW*; Zhang, MX; Lin PZ (2017) Skin Friction Reduction Characteristics of Nonsmooth Surfaces Inspired by the Shapes of Barchan Dunes MATHEMATICAL PROBLEMS IN ENGINEERING. 2017(2017), Article ID 6212605, 12 pages DOI: 10.1155/2017/6212605 IDS Number: EW2KE ISSN :1024-123X Subject Category: Engineering, Multidisciplinary; Mathematics, Interdisciplinary Applications Song, XW*; Lin PZ; Liu R; Zhou P (2017) Skin friction reduction characteristics of variable ovoid non-smooth surfaces Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering) 18(1):59-66 DOI: 10.1631/jzus.A1500324 Subject Category: Engineering, Multidisciplinary; Physics, Applied IDS Number: EI0PO ISSN: 1673-565X Miao Y; Song, XW*; Jin, T; Shan Y (2016) Improving the efficiency of solid-based NC simulation by using spatial decomposition methods International Journal of Advanced Manufacturing Technology. 87(1): 421-435 DOI: 10.1007/s00170-016-8450-6 IDS Number: EA1WO ISSN: 0268-3768 Subject Category: Automation & Control Systems; Engineering, Manufacturing Song, XW*; Zhou, WD; Pan, XX; Feng, K (2014) Disassembly Sequence Planning for Electro-Mechanical Products Under a Partial Destructive Mode ASSEMBLY AUTOMATION. 34(1): 106-114 DOI: 10.1108/AA-01-2013-006 Subject Category: Automation & Control Systems; Engineering; Manufacturing IDS Number: 302KL ISSN: 0144-5154 Song, XW*; Li, J; Xu, AQ (2013) Development of a Refined Rollover Model That Recognizes the Effects of Suspension and Tire Deformation MATHEMATICAL PROBLEMS IN ENGINEERING. (2013): ID 750896, 7 pages DOI:10.1155/2013/750896 Subject Category: Engineering; Mathematics IDS Number: 094LT ISSN:1024-123X Song, XW*; Zhang, GG; Wang, Y; Hu, SG(2011) Use of Bionic Inspired Surfaces for Aerodynamic Drag Reduction on Motor Vehicle Body Panels JOURNALOF ZHEJIANG UNIVERSITY-SCIENCE A. 12(7):543-551 DOI:10.1631/jzus.A1000505 Subject Category: Engineering; Physics IDS Number:821NI ISSN: 1673-565X Dan, WJ; Zhang, WG; Li, SH; Song, XW* (2011) Prediction of mechanical properties of TRIP590 steel with strain rate effect MATERIALS RESEARCH INNOVATIONS. 15(1): S90-S93 DOI: 10.1179/143307511X12858956847273 Subject Category: Multidisciplinary, Materials Science IDS Number:741JC ISSN: 1432-8917 Hass, J; Farouki, RT; Han, CY; Song, XW *; Sederberg, TW (2007) Guaranteed consistency of surface intersections and trimmed surfaces using a coupled topology resolution and domain decomposition scheme ADVANCES IN COMPUTATIONAL MATHEMATICS. 27(1): 1-26 DOI: 10.1007/s10444-005-7539-5 Subject Category: Mathematics IDS Number: 180RNISSN: 1019-7168Times Cited:5 (from Web of Science. Sep.2014) Song, XW*; Sederberg, TW; Zheng, JM; Farouki, RT; Hass, J (2004) Linear perturbation methods for topologically consistent representations of free-form surface intersections COMPUTER AIDED GEOMETRIC DESIGN (CAGD). 21(3): 303-319 DOI:10.1016/j.cagd.2003.11.004Subject Category: Computer Science; Mathematics IDS Number:805AGISSN: 0167-8396Times Cited:22 (from Web of Science. Sep.2014) Sederberg, TW; Zheng, JM; Song, XW (2004) A conjecture on tangent intersections of surface patches COMPUTER AIDED GEOMETRIC DESIGN (CAGD). 21(1): 1-2 DOI: 10.1016/j.cagd.2003.07.005Subject Category: Computer Science; Mathematics IDS Number:768NA ISSN: 0167-8396Times Cited:1 (from Web of Science. Aug.2011) Sederberg, TW; Zheng, JM; Song, XW (2003) Knot intervals and multi-degree splines COMPUTER AIDED GEOMETRIC DESIGN (CAGD). 20(7): 455-468 DOI: 10.1016/S0167-8396(03)00096-7Subject Category: Computer Science; Mathematics IDS Number:733KR ISSN: 0167-8396Times Cited:10 (from Web of Science. Sep.2014) Song, XW*; Ying, DN; Wang, EJ (1996) Feature representation product model for progressive die CAD/CAM system PROCEEDINGS OF THE SOCIETY OF PHOTO-OPTICAL INSTRUMENTATION ENGINEERS (SPIE). 2644: 381-385. FOURTH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN AND COMPUTER GRAPHICS. DOI: 10.1117/12.235547 Subject Category: Optics IDS Number:BF35BISBN: 0-8194-2015-8Times Cited:2 (from Web of Science. Aug.2011)