近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
2020
1. Liang Ma#, Zeyu Sun#, Changchun Zhou, Yuting Li, Binjie Li, Mengfei Yu, Yichen Luo, Lei Gao, Duo Zhang, Biaoyang Lin, Qingchong Qiu, Huayong Yang, Bin Zhang*, Lanjuan Li*,“Quantitative Proteomic comparison of GBM cultured under 2D and 3D” in preparing
2. Lei Gao#,Laing Ma# ,Xiaohong Yin, Yichen Luo, Huayong Yang,Bin Zhang*, “Nano- and micro-fabrication for engineering native-like muscle tissues” Submitted to Small Methods, Accepted
3. Bin Zhang, Xue Zhou, Liang Ma* ,Hao Zhang, “Opportunities and Challenges: Classification of Skin Disease Based on Deep Learning” in preparing
4. Liang Ma*#, Yuting Li#, Yutong Wu, Mengfei Yu, Abdellah Aazmi, Lei Gao, Qian Xue, Yichen Luo, Hongzhao Zhou, Bin Zhang*, Huayong Yang,'3D Bioprinted Hyaluronic Acid Based Brain Matrix-Mimetic as a Co-culture Platform for Brain Tumor Invasion, Submitted Advanced Healthcare Materials, Under Review
5. Liang Ma#, Yuting Li#,Yutong Wu,Abdellah Aazmi,Bin Zhang*,Hongzhao Zhou*,Huayong Yang,The Construction of In Vitro Tumor Models Based on 3D Bioprinting, Submitted to Bio-Design and Manufacturing, under review
6. Bin Zhang, Lei Gao, Qian Xue, ZHnfeng Cui, Liang Ma*, Huayong Yang*,Strengths, weaknesses, and applications of computational axial lithography in tissue engineering,Submitted to Bio-Design and Manufacturing, Accepted.
7. Bin Zhang, Qi Li, Liang Ma*, Hongzhao Zhou*, Huayong Yang,The investigation on thermal and other parameters’ effect on the printability of extrusion-based bioprinting for hydrogel composites, in preparing
2019
1.Bin Zhang#, Lei Gao#, Liang Ma*, Yichen Luo, Huayong Yang*, Zhanfeng Cui “3D bioprinting: Open the avenue for manufacturing whole body tissues and organs”Engineering,2019;5(4) 777-794
2.Bin Zhang, Qian Xue, Jingtao Li, Liang Ma*, Yufeng Yao, Hua Ye, Zhanfeng Cui, Huayong Yang “3D bioprinting for artificial cornea：challenges and perspectives” Medical Engineering and Physics, 2019;71,68-78
3.Bin Zhang, Qian Xue, Hanyin Hu, Lei Gao, Yichen Luo, Mengfei Yu, Yang Li, Jingtao Li, Liang Ma*, Yufeng Yao, Huayong Yang, Integrated 3D bioprinting-based geometry-control strategy for fabricating corneal substitutes, Journal of Zhejiang University-SCIENCE B(Biomedicine & Biotechnology), 2019; 20(12) ,945-959.
4.Jiaxing Gong; Miao Sun; Shaolong Wang; Jianxiang He; Yu Wang; Ying Qian; Yu Liu; Lingqing Dong;Liang Ma; Kui Cheng; Wen-Jian Weng; Mengfei Yu;Yu Shrike* Zhang; Huiming Wang, “Surface Modification by Divalent Main-group-elemental Ions for Improved Bone Remodeling to Instruct Implant Biofabrication”,ACS Biomaterials Science & Engineering，2019;5(7),3311-3324
5.Liu Jie, Ruifang Mao, Liang Ma, Biaoyang Lin* et al. Whole exome sequencing identifies a putative predictor of recurrent prostate cancers with high accuracy',OMICS,2019:8,380-388
6.Wensen Jiang#, Liang Ma#, Xiaobin Xu*'One-dimensional microstructure-assisted intradermal and intracellular delivery', BioDesign & Manufacturing, 2019;2(1),24-30
7.Boqing Zhang,Huan Sun,Lina Wu,Liang Ma*,Fei Xing,Qingquan Kong,Yujiang Fan,Changchun Zhou*,Xingdong Zhang,'3D printing of calcium phosphate bioceramic with tailored biodegradation rate for skull bone tissue reconstruction'BioDesign and Manufacturing,2019;2(3)，161-171
2018
1.Liang Ma*, Bin Zhang*, Changchun Zhou, Yuting Li, Binjie Li, Mengfei Yu, Yichen Luo, Lei Gao, Duo Zhang, Biaoyang Lin, qingchong Qiu, Huayong Yang“The comparison of genomics with Glioblastoma multiforme (GBM) cells under 3D and 2D cultures” Colloids and Surfces B:Biointerfaces 2018, 172,665-673
2.Lei Gao, Bin Zhang, Liang Ma, Yichen Luo, Qian Xue, Zhanfeng Cui*, Huayong Yang*,“Research lab on 3D bioprinting of Zhejiang University”, BioDesign & Manufacturing, 2018;1(3), 211-214
3.Bin Zhang#, Yicheng Luo#, Liang Ma#, Lei Gao, Yuting Li, Qian Xue, Huayong Yang*, Zhanfeng Cui“3D Bio-printing：An Emerging Technology Full of Opportunities and Challenges” , BioDesign & Manufacturing, 2018;1(1),1-12
4.Danna Cao#, Liang Ma#, Xiaodong Han, Lingqing Dong, Mengfei Yu, Bin Zhang, Binbin Ying, “ALK5 transfection of bone marrow mesenchymal stem cells to repair osteoarthritis of knee joint”, BioDesign & Manufacturing, 2018;1(2),135-145
5.Wensen Jiang#, Liang Ma#, Xiaobin Xu*; “Recent Progress on the Design and Fabrication of Micro-/Nanomachines and Their Biomedical Applications”, Bio-Design & Manufacturing 2018, 1(4), 225-236
6.Liang Ma, Lei Gao, Yichen Luo, Huayong Yang, Bin Zhang*, Changchun Zhou, JinGyu Ock and Wei Li, “Flow analysis of a porous polymer-based three-dimensional cell culture device for drug screening” ASME 2018 International Manufacturing Science and Engineering Conference, MSEC 2018-6313 (EI)
7.Qingchong Qiu,Lin Wang,Shanshan Jin,Guanfeng Liu, Jie Liu, Liang Ma,Biaoyang Lin* et.al.'CHI3L1 promotes tumor progression by activating TGF-βsignaling pathway in hepatocellular carcinoma',Scientific Reports,2018,8(1),15029
2017
1.Bin Zhang, Lei Gao, Long Gu, Huayong Yang, Yichen Luo, Liang Ma* 'High-resolution deposition system for construction of cell-laden hydrogel scaffolds with high cell activities' Procedia CIRP (EI) 2017,65,219-224
2.Xuan Pei#, Liang Ma#, Boqing Zhang, Jianxun Sun, Yong Sun, Yujiang Fan, Zhongru Gou, Changchun Zhou and Xingdong Zhang,” Creating hierarchical porosity hydroxyapatite scaffold with osteoinduction by three-dimensional printing and microwave sintering.” Biofabrication, 2017, 9:045008.
3.Ying Zhou, Lingqing Dong, Chao Liu, Yihan Lin, Mengfei Yu, Liang Ma, Bin Zhang, Kui Cheng, Wengjian Weng, Huiming Wang, Engineering prevascularized composite cell sheet by light-induced cell sheet technology. RSC Advances. 2017;7(52):32468-32477
4.Chen Xiaoyi, Xu Sanzhong, Wang Xuanwei, Yang Xianyan, Ma Liang, Zhang Lei, Yang Guojing, Yang Fang, Wang Linhong, Zhang Xinli, Ting Kang, Gao Changyou, Mou XiaoZhou*, Gou Zhongru*, Zou Hai*. Systematical comparison of biologically active foreign ions-codoped calcium phosphate microparticles on osteogenic differentiation in rat osteoporotic and normal mesenchymal stem cells. Oncotarget. 2017; 16618.
5.Ruifang Mao, Jie Liu, Guanfeng Liu, Shanshan Jin, Qingzhong Xue, Liang Ma, Yan Fu, Jinliang Xing, Lanjuan Li, Yunqing Qiu, Na Zhao, and Biaoyang Lin.“Whole genome sequencing of matched tumor, adjacent non-tumor tissue and corresponding normal blood samples of hepatocellular carcinoma patients revealed a TP53 (R249S) mutation associated with poor prognosis” Oncotarget 2017;15428
6.Yu, Mengfei , Gong, Jiaxing, Zhou, Ying , Dong, Lingqing, Lin, Yihan , Ma, Liang, Surface Hydroxyl Groups Regulate the Osteogenic Differentiation of Mesenchymal Stem Cells on Titanium and Tantalum Metals' Journal of Materials Chemistry B 2017,5,3955-3963
7.Chao Liu, Ying Zhou, Miao Sun, Qi Li, Lingqing Dong, Liang Ma, Kui Cheng, Wenjian Weng, Mengfei Yu*, and Huiming Wang*”Light-Induced Cell Alignment and Harvest for Anisotropic Cell Sheet Technology”, ACS Aplied materials and interfaces 2017; 9:36513-36524
Before 2016
1.Qing Gao，Yong He*，Jianzhong Fu，An Liu，Liang Ma “ Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery” Biomaterials,
2.Shao, Huifeng; Yang, Xianyan; He, Yong; Fu, Jianzhong; Liu, Limin; Ma, Liang; Zhang, Lei; Yang, Guojing; Gao, Changyou; Gou, Zhongru*'3D Printed Bioactive Glass-Reinforced Bioceramic Scaffolds: Sintering, Microstructure and Mechanical Behavior，Biofabrication 2015; 7: 035010
3.Changchun Zhou*, Xingjiang Ye, Yujiang Fan, Liang Ma, Yanfei Tan, fangzu Qing and Xingdong Zhang. Biomimetic fabrication of three-level hierarchical calcium phosphate/collagen/hydroxyapatite scaffold for bone tissue engineering.” Biofabrication 2014.6(3).035013
4.Weibin Ma, Xianyan Yang, Liang Ma, Xingang Wang, Haitao Ren, Lei Zhang, Guojing Yang, Chunmao Han and Zhongru Gou*, ”Fabrication of bioactive glasses-introduced nanofibrous membranes with multifunctions potentially for wound dressing” RSC Advances.2014.4:60114-60122.
5.Liang Ma, Wei Jiang and Wei Li*. “Solvent free fabrication of tissue engineering scaffolds with immiscible polymer blends.” International Journal of Polymeric Materials and Biomaterials, 2014.63(10):p1-8.
6.Liang Ma, Jeremy Barker，Biaoyang Lin and Wei Li*. “The design and fabrication of a porous polymer-based three-dimensional cell culture devices for drug screening culture.” International Journal of Mechatronics and Manufacturing Systems, 2013.6(3): p.229-241.(EI)
7.Liang Ma, Jeremy Baker, Changchun Zhou, Wei Li*, Jing Zhang, Biaoyang Lin*, Gregory Foltz, Jenni Küblbeck and Paavo Honkakoski. “Towards personalized medicine with A three-dimensional perfusion-based tissue-model system.” Biomaterials, 2012.33: p. 4353-4361.
8.Changchun Zhou, Liang Ma, Wei Li* and Donggang Yao. “Fabrication of tissue engineering scaffolds through solid-state foaming of immiscible polymer blends.” Biofabrication, 2011.3:045003.
9.Liang Ma, Changchun Zhou, Biaoyang Lin and Wei Li*. “A porous 3D cell culture micro device for cell migration study.” Biomedical Microdevices, 2010.12(4): p. 753-60.
10.Yin Cheng, Jun Wang, Jiaofang Shao, Qiyun Chen, Fan Mo, Liang Ma, Xu Han, Jing Zhang, Chen Chen, Cixiong Zhang, Shuyong Lin, Jiekai Yu, Shu Zheng, Sheng-Cai Lin, and Biaoyang Lin*. “Identification of novel SNPs by next generation sequencing of the genomic region containing the APC gene in colorectal cancer patients in China.”Omics, 2010.14(3): p.315-325.
11.Liang Ma; Jeremy Barker; Changchun Zhou; Biaoyang Lin;Wei Li*, “A perfused two-chamber system for anticancer drug screening”, ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010, v 2, p 587-590 (EI)
Conference:
1.Liang Ma, Changchun Zhou, Biaoyang Lin and Wei Li*. A comparative study on fabrication of in vitro tumor models.ASME 2010 First Global Congress on NanoEngineering for Medicine and Biology, Houston, TX, Feb.7-10, 2010.
2.Liang Ma, Jeremy Baker, Changchun Zhou, Biaoyang Lin, and Wei Li*. A perfused two-chamber system for anticancer drug screening.ASME 2010 International Manufacturing Science and Engineering Conference, Erie, PA, Oct.12-15, 2010.
3.Liang Ma, Jeremy Baker, Biaoyang Lin, and Wei Li*. Design and fabrication of a porous polymer-based three dimensional cell culture device for drug screening. 1st International Conference on Design and PROcesses for Medical Devices, Brescia, Italy. May.2-4, 2012.
4.Changchun Zhou, Liang Ma and Wei Li*. Immiscible polymer blends for biofabrication. 9th World Biomaterials Congress, Chengdu, China. June.1-5, 2012.
5.Liang Ma Three-Dimensional Microfluidic Perfusion-Based Liver Tissue Model System for Anticancer Drug Screening on Personalized Medicine.7th World Congress of Regenerative Medicine & Stem Cells, Haikou, China.Nov 13-16, 2014.
6.Bin Zhang, Lei Gao, Long Gu, Huayong Yang, Yichen Luo, Liang Ma*,High-resolution 3D bioprinting system for fabricating cell-laden hydrogel scaffolds with high cellular activities, 3rd CIRP Conference on BioManufacturing, Chicago, IL,USA, Jul 11-14, 2017.
7.Liang Ma, Yichen Luo, Lei Gao, Huayong Yang, Bin Zhang*.The Comparison Study of Genomics and Proteomics on Glioblastoma multiforme under 3D and 2D Cell Cultures Models,
Biofabrication 2017, Beijing, China. Oct 16-19, 2017
8.Liang Ma, Lei Gao, Changchun Zhou, JinGyu Ock, Wei Li, Huayong Yang, Bin Zhang*. Flow Analysis of a Porous Polymer-Based Three Dimensional Cell Culture Device for Drug Screening,
ASME MSEC 2018, College Station, USA, Jun 18-22, 2018
9.Liang Ma, Microfluidic Based 3D Glioblastoma multiforme（GBM） Model and Comparison study of Genomics and Proteomics Analysis between 2D and 3D, BDMC 2018, Hangzhou, China,
Aug 26-28,2018
10.Liang Ma, Tumor Biochip fabricated by 3D printing, RTR 2018, Kunshan, China , Nov 16-18,2018
11.Liang Ma, Liver and liverchip 3D bioprinting, CRME 2019,Shanghai, China, May 10-12, 2019
12.Liang Ma，“Design and manufacturing of Liver Tissue Model and Tumor Microenvironment with 3D Bioprinting，BDMC 2019，Tianjin，China，Sep 4-6,2019
13.Liang Ma , The Construction of GBM Invasion Model Based on 3D Bioprinting,Biofabrication2019,Columbus,OH,USA, Oct 20-22, 2019
京公网安备 11010802027423号