近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
42. Wang, Y.C.*, Han, C.Y., Mei, D.Q., Standing Surface Acoustic Wave-Assisted Fabrication of Region-Selective Microstructures via User-Defined Waveguides, Langmuir, 2019, 35: 11225-11231. (Cover Paper)
41. Xue, D., Zhang, J.X., Wang, Y.C.*, Mei, D.Q., Digital Light Processing-Based 3D Printing of Cell-Seeding Hydrogel Scaffolds with Regionally Varied Stiffness, ACS Biomaterials Science & Engineering, 2019, doi: 10.1021/acsbiomaterials.9b00696.
40. Wang, Y.C.*, Zhu, L.F., Mei, D.Q., Zhu, W.D., A highly flexible tactile sensor with an interlocked truncated sawtooth structure based on stretchable graphene/silver/silicone rubber composites, Journal of Materials Chemistry C, 2019, 7: 8669-8679.
39. Wang, Y.C.*, Chen, J.N., Mei, D.Q., Flexible Tactile sensor array for slippage and grooved surface recognition in sliding movement, Micromachines, 2019, 10: 579-16.
38. Wang, Y.C.*, Wu, X., Mei, D.Q., Zhu, L.F., Chen, J.N., Flexible tactile sensor array for distributed tactile sensing and slip detection in robotic hand grasping, Sensors and Actuators A; Physics, 2019, 297: 111512-13.
37. Feng, Y.B., Mei, D.Q.*, Wang, Y.C., Cohesive zone method based multi particle finite element simulation of compaction densification process of Al and NaCl laminar composite powders, Journal of Physics and Chemistry of Solids, 2019, 134: 35-42.
36. Chen, L.Q. Mei, D.Q.*, Wang, Y.C., Li, Y., Ni barrier in Bi2Te3-based thermoelectric modules for reduced contact resistance and enhanced power generation properties, Journal of Alloys and Compounds, 2019, 796: 314-320.
35. Wang, Y.C.*, Guo, X.T., Shi, Y.G., Mei, D.Q. Self-powered wearable ultraviolet index detector using a flexible thermoelectric generator, Journal of Micromechanics and Microengineering, 2019, 29: 045002-8.
34. Xue, D., Wang, Y.C.*, Mei, D.Q. Multi-step exposure method for improving structure flatness in digital light processing-based printing, Journal of Manufacturing Processes, 2019, 39: 106-113.
33. Zhu, L.F., Wang, Y.C.*, Mei, D.Q., Wu, X., 2018, Highly Sensitive and Flexible Tactile Sensor Based on Porous Graphene Sponges for Distributed Tactile Sensing in Monitoring Human Motions, IEEE Journal of Microelectromechanical Systems, 2019, 28(1): 154-163.
32. Shi, Y.G., Wang, Y.C.*, Mei, D.Q., Chen, Z.C., 2018, Wearable Thermoelectric Generator With Copper Foam as the Heat Sink for Body Heat Harvesting, IEEE Access, 6: 43602-43611.
31. Wang, Y.C., Huang, L.X., Mei, D.Q., Feng, Y.B., Qian, M., 2018, Numerical modeling of microchannel reactor with porous surface microstructure based on fractal geometry, International Journal of Hydrogen Energy, 43(49): 22447-22457.
30. Wang, Y.C.*, Mei, D.Q., 2018, Five-plane lancet needle design for soft PVC phantom tissue cutting, Bio-Design and Manufacturing, 1(3): 195-202.
29. Xue, D., Wang, Y.C.*, Zhang, J., Mei, D.Q., Wang, Y., Chen, S.C., 2018, Projection-based 3D printing of cell patterning scaffolds with multi-scale channels, ACS Applied Material & Interface, 10(23): 19428-19435.
28. Yin, J., Yan, M.L., Wang, Y.C., Fu, J.Z., Suo, H.R., 2018, 3D bioprinting of low concentration cell-laden gelatin methacrylate (GelMA) bioinks with two-step crosslinking, ACS Applied Material & Interface, 10: 6849-6857. (ESI高被引论文)
27. Wang, Y.C., Shi, Y.G., Mei, D.Q., Chen, Z.C., 2018, Wearable Thermoelectric Generator to Harvest Body Heat for Powering a Miniaturized Accelerometer, Applied Energy, 215: 690-698.
26. Shi, Y.Q., Wang, Y.C.*, Mei, D.Q., Chen, Z.C., 2018, Numerical Modeling of the Performance of Thermoelectric Module with Polydimethylsiloxane Encapsulation, International Journal of Energy Research, 42:1287-1297.
25. Wang, Y.C., Xue, D., Mei, D.Q., 2018, Patterned Microstructure Array Fabrication by Using a Novel Standing Surface Acoustic Wave Device, ASME Journal of Micro- and Nano-Manufacturing, 6(2):021002-7.
24. Shi, Y.Q., Wang, Y.C., Mei, D.Q., Feng, B., Chen, Z.C., 2018, Design and Fabrication of Wearable Thermoelectric Generator Device for Heat Harvesting, IEEE Robotics and Automation Letters, 3(1): 373-378.
23. Wang, Y.C., Liang, G.H., Mei, D.Q., Chen, Z.C., 2017, Flexible Tactile Sensor Array Mounted on the Curved Surface: Analytical Modeling and Experimental Validation, IEEE Journal of Microelectromechanical Systems, 26(5): 1002-1011.
22. Wang, Y.C., Shi, Y.Q., Mei, D.Q., Chen, Z.C., 2017, Wearable Thermoelectric Generator for Harvesting Heat on the Curved Human Wrist, Applied Energy, 205: 710-719.
21. Zheng, Y.H., Wang, Y.C., Chen, R.K., Deshpande, S., Nelson, N.S., Buchman, S.R., Shih, A.J., 2017, Tissue transformation mold design and stereolithography fabrication, Rapid Prototyping Journal, 23(1): 162-168.
20. Wang, Y.C., Li, W.S., Han, P.D., Giovannini, M., Ehmann, K., Shih, A., 2016, Contributions in medical needle technologies- geometry, mechanics, design and manufacturing, Machining Science and Technology, 20(1): 1-43.
19. Wang, Y.C., Xi, K.L., Mei, D.Q., Liang, G.H., Chen, Z.C., 2016, A Flexible Tactile Sensor Array based on Pressure Conductive Rubber for Contact Force Measurement and Slip Detection, Journal of Robotics and Mechatronics, 7: 378-385.
18. Li, W.S., Wang, Y.C., Nteziyaremye, C., Yamaguchi, H., Shih, A.J., 2016, Measurement of the friction force inside the needle in biopsy, ASME Journal of Manufacturing Science and Engineering, 138: 031003.
17. Liang, G.H., Wang, Y.C., Mei, D.Q., Xi, K.L., Chen, Z.C., 2016, An analytical model for studying the structural effects and optimization of a capacitive tactile sensor array, Journal of Micromechanics and Microengineering, 26: 045007.
16. Mei, D.Q., Xue, D., Wang, Y.C., Chen, S.C., 2016, Undulate microarray fabrication on polymer film using standing surface acoustic waves and ultraviolet polymerization, Applied Physics Letters, 108: 241911-4.
15. Wang, Y.C., Chen, R.K., Tai, B.L., Shih, A.J., 2015, Study of the guidewire suturing of soft tissue using a haptic position measurement system, ASME Journal of Biomechanical Engineering, 137: 041004.
14. Luo, Y., Wang, Y.C., Tai, B.L., Shih, A.J., 2015, Bone Geometry on the Contact Stress in the Shoulder for Evaluation of Pressure Ulcers: Finite Element Modeling and Experimental Validation, Medical Engineering & Physics, 37: 187-194.
13. Liang, G.H., Wang, Y.C., Mei, D.Q., Xi, K.L., Chen, Z.C., 2015, Flexible capacitive tactile sensor array with pyramid array for three-axis force measurement. IEEE Journal of Microelectromechanical Systems, 24: 1510-1519.
12. Liang, G.H., Wang, Y.C., Mei, D.Q., Xi, K.L., Chen, Z.C., 2015, A modified analytical model to study the sensing performance of a flexible capacitive tactile sensor array. Journal of Micromechanics and Microengineering, 25: 035017.
11. Shi, Y.G., Mei, D.Q., Yao, Z.H., Wang, Y.C., Liu, H.Y., Chen, Z.C., 2015, Nominal power density analysis of thermoelectric pins with non-constant cross sections. Energy Conversion and Management, 97: pp. 1-6.
10. Wang, Y.C., Li, W.S., Shih, A.J., 2014, Characterization of the nonwoven polishing wheel topography by nano-CT scanning, CIRP Annuals- Manufacturing Technology, 63: 541-544.
9. Wang, Y.C., Chen, R.K., Tai, B.L., Shih, A.J., 2014, Optimal needle design for minimal insertion force and bevel length, Medical Engineering & Physics, 36: 1093-1100.
8. Wang, Y.C., Tai, B.L., Yu, H.W., Shih, A.J., 2014, Silicone-based tissue-mimicking phantom for needle insertion simulation. ASME Journal of Medical Devices, 8: 021001-7.
7. Liang, G.H., Mei, D.Q., Wang, Y.C., Dai, Y., Chen, Z.C., 2014, Modeling and analysis of a capacitive tactile sensor array for normal force measurement, IEEE Journal of Sensors, 2014: 4095-4103.
6. Wang, Y.C., Tai, B.L., Chen, R.K., Shih, A.J., 2013, The Needle with Lancet Point – Geometry for Needle Tip Grinding and Tissue Insertion Force, ASME Journal of Manufacture Science and Engineering, 135: 041010.
5. Chen, R.K., Wang, Y.C., Tai, B.L., Shih, A.J., 2013, The haptic position measurement of soft or compliant objects using the magnetic tracking system, Manufacturing Letters, 1: 17-20.
4. Wang, Y.C., Spangler, C., Tai, B.L., Shih, A.J., 2013, Positional Accuracy and Transmitter Orientation Sensitivity of the 3D Electromagnetic Tracking System, Measurement Science and Technology, 24: 105105.
3. Belmont, B., Wang, Y.C., Ammanath, P., Wrobel, J., Shih, A., 2013, An apparatus to quantify anteroposterior and mediolateral shear reduction in shoe insoles, Journal of Diabetes Science and Technology, 7: 410-419.
2. Wang, Y.C., Tai, B.L., Van Loon, M., Shih, A.J., 2012, Grinding the Sharp Tip in Thin NiTi and Stainless Steel Wires, International Journal of Machine Tools and Manufacture, 62: 53-60.
1. Wang, Y.C., Mei, D.Q., Chen, Z.C., 2011, Piezoresistive slot-cantilever type accelerometer inspired from spider’s slit sensilla. Sensor Letters, 9: 1309-1315.
京公网安备 11010802027423号