近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
1、 Chao Qun, Zhang Junhui*, Xu Bing, et al. Discussion on the Reynolds equation for the slipper bearing modeling in axial piston pumps. Tribology International, 2018,118:140-147.
2、Chao Qun, Zhang Junhui*, Xu Bing, Chen Yuan, Ge Yaozheng. Spline design for the cylinder block within a high-speed electro-hydrostatic actuator pump of aircraft. Meccanica,2018, 53:395-411.
3、Zhang Junhui, Chao Qun, Xu Bing*. Analysis of Cylinder Block Tilting Inertia Moment and its Effect on the Performance of High-speed Electro-hydrostatic Actuator Pump of Aircraft. Chinese Journal of Aeronautics. 2018, 31(1):169-177.
4、Chao Qun, Zhang Junhui*, Xu Bing, et al. Multi-position measurement of oil film thickness within the slipper bearing in axial piston pumps.Measurement. 2018, 122：66-72.
5、Zhang Junhui, Xia Shiqi, Ye Shaogan*, Xu Bing, et al. Experimental investigation on the noise reduction of an axial piston pump using free-layer damping material treatment. Applied Acoustics. 2018, 139,1-7.
6、Cheng Min, Zhang Junhui,Xu Bing, Ding Ruqi, et al. Decoupling compensation for damping improvement of the electrohydraulic control system with multiple actuators. IEEE/ASME Transactions on Mechatronics. 2018, accepted.
2017年发表SCI论文
1、Zhang Junhui*, Chao Qun, Xu Bing, Pan Min, Chen Yuan. Effect of Piston-Slipper Assembly Mass Difference on the Cylinder Block Tilt in a High-Speed Electro-Hydrostatic Actuator Pump of Aircraft. International Journal of Precision Engineering and Manufacturing. 2017, 18(7): 995-1003.
2、Zhang Junhui*, Li Ying, Xu Bing, Pan Min, Lv Fei. Experimental Study on the Influence of the Rotating Cylinder and Circling Pistons on Churning Losses in Axial Piston Pumps. energies. 2017, 10(5): 662.
3、Ye Shaogan, Zhang Junhui*,Xu Bing, et al. Experimental and numerical studies on erosion damage in damping holes on the valve plate of an axial piston pump. Journal of Mechanical Science and Technology. 2017, 31 (9) : 4285~4295.
4、Cheng Min*, Xu Bing, Zhang Junhui, Ding Ruqi. Pump-Based Compensation for Dynamic Improvement of the Electrohydraulic Flow Matching System. IEEE Transactions on Industrial Electronics. 2017, 64(4): 2903-2913.
5、Zhang Junhui, Chao Qun, Wang Qiannan, Xu Bing. Experimental investigation of the slipper spin in an axial piston pump. Measurement, 2017.102:112-120.
6、Ding Ruqi, Xu Bing*, Zhang Junhui, Cheng Min. Online-tuning Pressure Feedback Control by Pole Placement for Vibration Reduction of Excavator with Independent Metering Fluid Power System.mechanical systems and signal processing. 2017, 92: 86-106.
7、Zhang Junhui, Chao Qun, Xu Bing*, Pan Min, Wang Qiannan, Chen Yuan. Novel three-piston pump design for a slipper test rig. Applied Mathematical Modelling.2017, 52: 65-81.
8、Xu Bing, Su Qi, Zhang Junhui*, Lu Zhenyu. Analysis and compensation for the cascade dead-zones in the proportional control valve. ISA transactions. 2017, 66: 393-403.
9、Xu Bing, Dong Pengpeng, Zhang Junhui*, Yao Jinjin. Research on a Novel Flow Rate Inferential Measurement Method and its Application in Hydraulic Elevators. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2017, 231(2): 372-386.
10、Cheng Min, Xu Bing, Zhang Junhui, Ding Ruqi. Valve-based compensation for controllability improvement of the energy-saving electrohydraulic flow matching system. Journal of Zhejiang University SCIENCE A. 2017,18(6):430-442
11、Xu Bing, Chao Qun, Zhang Junhui*, Chen Yuan. Effects of the Dimensional and Geometrical Errors on the Cylinder Block Tilt of a High-speed EHA Pump. Meccanica, 2017, 52(10): 2449-2469.
12、Xu Bing, Hu Min and Zhang Junhui. Distribution characteristics and impact on pump's efficiency of hydro-mechanical losses of axial piston pump over wide operating ranges. Journal of Central South University. 2017, 24(3): 609-624.
13、Zhang Junhui, Yang Meisheng, Xu Bing, et al. A novel intelligent sliding sleeve for shale oil and gas mining equipment[J]. Journal of Petroleum Science and Engineering, 2017, 158: 1-10.
14、Ye S, Zhang J*, Xu B, et al. A hybrid lumped parameters/finite element/boundary element model to predict the vibro-acoustic characteristics of an axial piston pump[J].Shock and Vibration，2017，3871989.
15、Zhang Junhui, Chen Yuan, Xu Bing, et,al.Effects of the Splined Shaft Bending Rigidity on the Cylinder Tilt Behaviour for High-speed Electro-hydrostatic Actuator Pumps, Chinese Journal of Aeronautics. 2017, Accepted.
16、Zhang Junhui, Wang Di, Xu Bing, et,al. Experimental and numerical investigation of flow forces in a seat valve using a damping sleeve with orifices. J Zhejiang Univ-Sci A (Appl Phys & Eng), 2017, Accepted.
2016年发表SCI论文
1、Ding Ruqi, Xu Bing*, Zhang Junhui, Cheng Min. Bumpless Mode Switch of Independent Metering Fluid Power System for Mobile Machinery. Automation in Construction, 2016, 68: 52-64.
2、Xu Bing, Ye Shaogan, Zhang Junhui*, Zhang Chunfeng. Flow ripple reduction of an axial piston pump by a combination of cross-angle and pressure relief grooves: analysis and optimization. Journal of Mechanical Science and Technology.2016, 30(6): 2531-2545.
3、Xu Bing, Ye Shaogan, Zhang Junhui*. Numerical and experimental studies on housing optimization for noise reduction of an axial piston pump. Applied Acoustics, 2016, 110: 43-52.
4、Xu Bing*, Hu Min, Zhang Junhui. Characteristics of volumetric losses and efficiency of axial piston pump with respect to displacement conditions，Journal of Zhejiang University SCIENCE A. 2016，17（03）：186-201.
5、Xu Bing, Ding Ruqi, Zhang Junhui. Multiphysics Coupled Modeling: Simulation of Hydraulic Operating Mechanism for SF6 High Voltage Circuit Breaker. IEEE/ASME Transactions on Mechatronics. IEEE/ASME Transactions on Mechatronics，2016，21(1)：379-393.
6、Xu Bing, Su Qi, Zhang Junhui. A dead-band model and its online detection for the pilot stage of a two-stage directional flow control valve. Proceedings of the institution of mechanical engineers part c-journal of mechanical engineering science. 2016，230（4）：639-654.
2015年发表SCI论文
1、Xu Bing, Ye Shaogan, Zhang Junhui*. Noise Reduction of an Axial Piston Pump by Valve Plate Optimization. Chinese Journal of Mechanical Engineering. 2015, Accepted.
2、Xu Bing, Wang Qiannan, Zhang Junhui*. Effect of case drain pressure on slipper swash plate pair within axial piston pump. Journal of Zhejiang University SCIENCE A，2015，16(12)：1001-1014.
3、Xu Bing, Ding Ruqi, Zhang Junhui. Pump/Valves Coordinate Control of the Independent Metering System for Mobile Machinery. Automation in Construction. 2015, 57: 98-111.
4、Xu Bing, Cheng Min, Yang Huayong, Zhang Junhui. A Hybrid Displacement/Pressure Control Scheme for an Electrohydraulic Flow Matching System. IEEE/ASME Transactions on Mechatronics. 2015，20（6）：2771-2782.
5、Xu Bing, Hu Min, Zhang Junhui. Impact of Typical Steady-State Conditions and Transient Conditions on Flow Ripple and Its Test Accuracy for Axial Piston Pump. Chinese Journal of Mechanical Engineering. 2015, 28(5): 1012-1022.
6、Xu Bing, Lee Kok-meng, Song Yuechao, Yang Huayong. A Numerical and Experimental Investigation of Parametric Effect on Flow Ripple. proceedings of the institution of mechanical engineers part c-journal of mechanical engineering science.2015，229（16）：2939-2951.
7、Xu Bing, Ye Shaogan, Zhang Junhui. Effects of index angle on flow ripple of a tandem axial piston pump. Journal of Zhejiang University-Science A (Applied Physics & Engineering). 2015, 16: 404-417.
8、Xu Bing, Sun Yinghui, Zhang Junhui, Sun Tong, Mao Zebing. A new design method for the transition region of valve plate for Axial Piston Pump. Journal of Zhejiang University-Science A (Applied Physics & Engineering). 2015, 16(3): 229-240.
2014年发表SCI论文
1、Xu Bing, Cheng Min, Yang Huayong, Zhang Junhui. An energy-saving hydraulic servo system with safety consideration for pipe fatigue tests. Proceedings of the Institution of Mechanical Engineers Part I-Journal of Systems and Control Engineering. 2014, 228(7): 486-499.
2、Xu Bing, Dong Pengpeng, Zhang Junhui, Zhang Song. Design and evaluation of a novel self-locking quick release mechanism featured by heavy load, fast response, and high security. Advances in Mechanical Engineering. 2014, 2014(2).
3、Xu Bing, Dong Pengpeng, Zhang Junhui, Zhang Song. A three dimensional approach to model steel wire ropes used in high energy absorber apparatus. International Journal of Solids and Structures. 2014, 51：4280-4293.
4、Xu Bing, Cheng Min, Yang Huayong, Zhang Junhui, Mao Zebing, Wang Di, Yue Yiming. An automatic three-dimensional loading apparatus for static tests of truss joints. Automation in Construction. 2014, 48：11-17.
5、Xu Bing, Ding Ruqi, Zhang Junhui, Su Qi. Modeling and dynamic characteristics analysis on a three-stage fast-response and large-flow directional valve. Energy Conversion and Management. 2014, 79:187-199.
2013年及以前发表SCI论文
1、Xu Bing, Cheng Min, Yang Huayong, Zhang Junhui, Yang Meisheng. Safety brake performance evaluation and optimization of hydraulic lifting systems in case of overspeed dropping. Mechatronics. 2013, 23(8):1180-1190.
2、Xu Bing, Zhang Junhui, Yang Huayong. Simulation research on distribution method of axial piston pump utilizing pressure equalization mechanism. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science. 2013, 227(3): 459-469.
3、Xu Bing, Song Yuechao, Yang Huayong. Pre-compression volume on flow ripple reduction of a piston pump. Chinese Journal of Mechanical Engineering (english Edition). 2013, 26(6): 1259-1266.
4、Xu Bing, Zhang Junhui, Yang Huayong, Li Yingbing. Investigation on structural optimization of anti-overturning slipper of axial piston pump. Science in China - Series E: Technological Sciences. 2012, 55(11): 3010-3018.
5、Xu Bing, Zhang Junhui, Yang Huayong, Zhang Bin. Investigation on the radial micro-motion about piston of axial piston pump ，Chinese Journal of Mechanical Engineering (English Edition). 2013, 26(2): 325-333.
6、Liu Wei, Xu Bing, Yang Huayong. Hydraulic Operating Mechanisms for High Voltage Circuit Breakers: Progress Evolution and Future Trends. Science China-Technological Sciences. 2011, 54(1):116-125.
7、Ma Ji'en, Xu Bing, Zhang Bin, Yang Huayong. Flow Ripple of Axial Piston Pump with Computational Fluid Dynamic Simulation Using Compressible Hydraulic Oil. Chinese Journal of Mechanical Engineering (English Edition). 2010, 23(1): 45-52.
8、Ma, Ji-en, Fang, You-tong, Xu, Bing, Yang, Hua-yong. Optimization of cross angle based on the pumping dynamics model. Journal of Zhejiang University-Science A(Applied Physics & Engineering). 2010, 11(3):181-190.
9、Zhang Bin，Xu Bing, Xia Chunlin, Yang Huayong. Modeling and Simulation on Axial Piston Pump Based on Virtual Prototype Technology. Chinese Journal of Mechanical Engineering (English Edition). 2009, 22(1):84-90.
10、Zhang Bin, Xu Bing, Yang Huayong, Luo Degang. Investigation on the Cross Power Control of Axial Piston Double Pump Based on the Virtual Prototype. Journal of Advanced Mechanical Design Systems and Manufacturing. 2009, 3(3): 277-288.
11、Ouyang XiaoPing, Yang HuaYong, Jiang Haoyi, Xu Bing. Simulation of the piezoelectric high-speed on/off valve. Chinese Science Bulletin. 2008, 53(17): 2706-2711
12、Ouyang XiaoPing, Yang HuaYong, Xu Bing, Xu XiuHua. Research on the hydraulic transformer with new distribution pairs. Science in China - Series E: Technological Sciences. 2008, 51(4): 435-442.13、Yang Huayong, Sun Wei, Xu Bing. New Investigation in energy regeneration of hydraulic elevators. IEEE/ASME Transactions on Mechatronics. 2007, 12(5): 519-526.
13、Xu Bing, Yang Jian, Yang Huayong. Comparison of Energy-Saving on the Speed Control of the VVVF Hydraulic Elevator with and without the Pressure Accumulator. Mechatronics. 2005, 15(10):1159-1174.
14、Yang Jian, Xu Bing, Yang Huayong. Study on the Floatation Mechanism and Floatation Performance for the Floatation Cyclone of Natural Inlet Air. Fuel. 2004, 83(17-18): 2419-2425.
15、Yang Huayong, Yang Jian, Xu Bing. Computational Simulation and Experimental Research on Speed Control of VVVF Hydraulic Elevator. Control Engineering Practice. 2004, 12(5): 563-568.
京公网安备 11010802027423号