近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
45. He Zhenya, Fu Jianzhong, Zhang Liangchi, Yao Xinhua. A new error measurement method to identify all six error parameters of a rotational axis of a machine tool, International Journal of Machine Tools & Manufacture, 2014. (In press, TOP)
44. Jin Yu’an, He Yong, Fu Jianzhong, Gan Wenfeng, Lin Zhiwei. Optimization of tool-path generation for material extrusion-based additive manufacturing technology. Additive Manufacturing, 2014. (In press)
43. Jin Yu’an, He Yong, Gao Qing, Fu Jianzhong, Fu Guoqiang. Droplet deviation modeling and compensation scheme of inkjet printing. The International Journal of Advanced Manufacturing Technology, 2014. (In press)
42. Xia Chenhui, Fu Jianzhong, Xu Yuetong, Chen Zichen. A novel method for fast identification of a machine tool selected point temperature rise based on an adaptive unscented Kalman filter. Journal of Zhejiang University SCIENCE A, 2014. (In press)
41. Zhang Ya, Fu Jianzhong, Chen Zichen. Identification of kinematic errors of five-axis machine tool trunnion axis from finished test piece. Chinese Journal of Mechanical Engineering, 2014. (In press)
40. Shen Hongyao, Fu Jianzhong, Lin Zhiwei. Five-Axis Trajectory Generation Based on Kinematic Constraints and Optimization, International Journal of Computer Integrated Manufacturing, 2014. (In press)
39. Jin Yu’an, He Yong, Fu Jianzhong, Lin Zhiwei, Gan Wenfeng. A fine-interpolation-based parametric interpolation method with a novel real-time look-ahead algorithm. Computer-Aided Design, 2014, 55: 37-48.
38. Lin Zhiwei, Fu Jianzhong, Shen Hongyao, Gan Wenfeng. A generic uniform scallop tool path generation method for five-axis machining of freeform surface. Computer-Aided Design, 2014, 56: 120-132.
37. Lin Zhiwei, Fu Jianzhong, Shen Hongyao, Gan Wenfeng. On the workpiece setup optimization for five-axis machining with RTCP function. The International Journal of Advanced Manufacturing Technology, 2014, 74(1-4): 187-197.
36. Gan Wenfeng, Fu Jianzhong, Shen Hongyao, Zhiyu Chen, Lin Zhiwei, Five-axis toolpath generation in CNC machining of T-spline surfaces. Computer-Aided Design, 2014, 52: 51-63.
35. Lin Zhiwei, Fu Jianzhong, Shen Hongyao, Gan Wenfeng. An accurate surface error optimization for five-axis machining of freeform surfaces. The International Journal of Advanced Manufacturing Technology, 2014, 71(5-8): 1175-1185.
34. Lin Zhiwei, Fujianzhong, Shen Hongyao, Gan Wenfeng. Non-singular tool path planning by translating tool orientations in C-space. The International Journal of Advanced Manufacturing Technology, 2014, 71(9-12): 1835-1848.
33 Fu Guoqiang, Fu jianzhong, Xu Yuetong, Chen Zichen. Product of exponential model for geometric error integration of multi-axis machine tools. The International Journal of Advanced Manufacturing Technology, 2014, 71: 1653-1667.
32. Li Sheng, Yao Xinhua, Fu Jianzhong. Power output characterization assessment of thermoelectric generation in machine spindles for wireless sensor driving. Sensor Review, 2014, 34(2): 192-200.
31. Peng Zhao, Zhou Huamin, He Yong, Cai Kan, Fu Jianzhong. A non-destructive on-line method for monitoring the injection molding process by collecting and analyzing machine running data. International Journal of Advanced Manufacturing Technology, 2014, 72: 765-777.
30. Gan Wenfeng, Fu Jianzhong, Shen Hongyao, Lin Zhiwei. A Morphing Machining Strategy for Artificial Bone. Journal of Zhejiang University SCIENCE A, 2014, 15(3): 157-171.
29. Xia Chenhui, Fu Jianzhong, Xu Yuetong, Chen Zichen. Machine tool selected point temperature rise identification based on operational thermal modal analysis. The International Journal of Advanced Manufacturing Technology, 2014. 70(1-4): 19-31.
28. He Yong, Fu JianZhong, Zhao Peng, Chen ZiChen. Enhanced polymer filling and uniform shrinkage of polymer and mold in a hot embossing process. Polymer Engineering & Science, 2013, 53: 1314-1320.
27. Zhao Peng, Wang Shuo, Ying Ji, Fu Jianzhong. Non-destructive measurement of cavity pressure during injection molding process based on ultrasonic technology and Gaussian process. Polymer testing, 2013, 32(8): 1436-1444. (Top)
26. Zhang Ya, Fu Jianzhong, Chen Zichen. Machining tests to identify kinematic errors of machine tooltable rotation axis based on sensitive directions. The International Journal of Advanced Manufacturing Technology, 2013, 67(1-4): 495-500.
25. Lin Zhiwei, Fu Jianzhong, He Yong, Gan Wenfeng. A robust 2D point-sequence curve offset algorithm with multiple islands for contour-parallel tool path. Computer-Aided Design, 2013. 45(3): 657-670.
24. Lin Zhiwei, Fu Jianzhong, Shen Hongyao, Gan Wenfeng. Global uncut regions removal for efficient contour-parallel milling. The International Journal of Advanced Manufacturing Technology, 2013, 68(5-8): 1241-1252.
23. Lin Zhiwei, Fu Jianzhong, Shen Hongyao, Gan Wenfeng. Efficient cutting area detection in roughing process for meshed surfaces. The International Journal of Advanced Manufacturing Technology, 2013, 69(1-4): 525-530.
22. Jin Yu’an, He Yong, Fu Jianzhong, Chen Zichen. An interpolation method for the open CNC system based on EPM. The International Journal of Advanced Manufacturing Technology, 2013, 69(1-4): 405-416.
21. Jin Yu’an, He Yong, Fu Jianzhong, Chen Zichen. A look-ahead and adaptive speed control algorithm for parametric interpolation. The International Journal of Advanced Manufacturing Technology, 2013, 69(9-12): 2613–2620
20. Shen Hongyao, Fu Jianzhong, He Yong, Yao Xinhua. On-line Asynchronous Compensation Methods for static/quasi-static error implemented on CNC machine tools. International Journal of Machine Tools & Manufacture, 2012, 60: 14-26. (Top)
19. Lin Zhiwei, Shen Hongyao, Gan Wenfeng, Fu Jianzhong. Approximate tool posture collision-free area generation for five-axis CNC finishing process using admissible area interpolation. The International Journal of Advanced Manufacturing Technology, 2012, 62(9-12): 1191-1203.
18. Shen Hongyao, Fu Jianzhong, Chen Zichen, Gan Wenfeng. Cutter location determination for complex surface based on double offset surfaces in ball-end milling. Advanced Science Letters, 2011, 4(8-10): 3140-3145.
17. Shen Hongyao, Fu Jianzhong, Fan Yongqiang. A new adaptive interpolation scheme of nurbs based on axis dynamics. International Journal of Advanced Manufacturing Technology, 2011, 56(1-4): 215-221.
16. Shen Hongyao, Yao Xinhua, Fu Jianzhong. Smooth non-uniform rational B-spline (NURBS) machining with kinematic limit for short linear segments. International Journal of Computer Integrated Manufacturing, 2011, 24(12): 1103-1116.
15. He Zhenya, Yao Xinhua, Fu Jianzhong, Chen Zichen. Volumetric Error Prediction and Compensation of NC Machine Tool Based on Least Square Support Vector Machine. Advanced Science Letters, 2011, 4(6): 2066-2070.
14. Zhao Peng, Fu Jianzhong, Cui Shubiao. Nondestructive characterization of polymers during injection molding with ultrasonic attenuation measurement. Materials Research Innovations, 2011, 15(1): 311-314.
13. Zhao Peng, Fu Jianzhong, Zhou Huamin, Yan Bo. Fast prediction of injection pressure and minimal front temperature for injection moulding. International Polymer Processing, 2011, 26(1): 21-29.
12. Zhao Peng, Fu Jianzhong, Zhou Huamin, Cui Shubiao. Automated process parameters tuning for injection moulding machine with soft computing. Journal of Zhejiang University Science A, 2011, 12(3): 201-206.
11. Zhao Peng, Fu Jianzhong, Zhou Huamin, Li Yang. Real-time prediction of filling pattern for polymer injection molding. Advanced Science Letters, 2011, 4(8-9): 2922-2926.
10. Shen Hongyao, Fu Jianzhong, Chen Zichen, Fan Yongqiang. Generation of offset surface for tool path in NC machining through level set methods. International Journal of Advanced Manufacturing Technology, 2010, 46(9): 1043-1047.
9. He Yong, Fu Jianzhong, Chen Zichen. Analysis of pattern height development in hot embossing process. Microsystem Technologies Micro And Nanosystems Information Storage And Processing Systems, 2009, 15(7): 963-968.
8. Yao Xinhua, Fu Jianzhong, Chen Zichen. Intelligent fault diagnosis using rough set method and evidence theory for NC machine tools. International Journal of Computer Integrated Manufacturing, 2009, 22(5): 472-482.
7. He Yong, Fu Jianzhong, Chen Zichen. Experimental study on the hot embossing polymer microfluidic chip. Chinese Journal of Mechanical Engineering, 2008, 21(3): 87-89.
6. Shen Hongyao, Fu Jianzhong, Chen Zichen. Axis-based look-ahead interpolator for machining of surfaces represented by NURBS curves. Machining Science and Technology, 2008, 12(4): 546-562.
5. Yao Xinhua, Fu Jianzhong, Chen Zichen. Bayesian networks modeling for thermal error of numerical control machine tools. Journal of Zhejiang University Science A, 2008, 9(11): 1524-1530.
4. Ren Kun, Fu Jianzhong, Chen Zichen. Look-ahead algorithm for velocity control based on parameterized curve interpolator. Chinese Journal of Mechanical Engineering, 2008, 21(2): 23-26.
3. He Yong, Fu Jianzhong, Chen Zichen. Optimization of control parameters in micro hot embossing. Microsystem Technologies Micro And Nanosystems Information Storage and Processing Systems, 2008, 14(3): 325-329.
2. He Yong, Fu Jianzhong, Chen Zi-Chen. Research on optimization of the hot embossing process. Journal of Micromechanics and Microengineering, 2007, 17(12): 2420-2425. (Top)
1. Ren Kun, Fu Jianzhong, Chen Zi-chen, Research on new software compensation method of static and quasi-static errors for precision motion controller. Journal of Zhejiang University Science A, 2007, 8(12): 1938-1943.
京公网安备 11010802027423号