个人简介
二、教育经历
1. 2014/9-2017/7,华中科技大学,机械电子工程,博士,导师:张国军
2. 2012/9-2014/7,华中科技大学,机械电子工程,硕博连读,导师:张国军
3. 2008/9-2012/7,西南交通大学,机械设计制造及其自动化,学士,导师:梁平
三、科研与学术工作经历
1. 2017/7-至今,中南大学,机电工程学院,讲师
研究领域
研究方向
1. 科学研究:超精密加工、特种加工,电火花加工,激光加工等;
2. 工程实践研究:自动化及高端装备研发。
近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
13. Chen Z. et al. Study on the white layer in wire electrical discharge trim cutting of bearing steel GCr15[J]. Journal of Advanced Manufacturing Technology, 等级:Q2
12. Chen Z. et al. Investigation on a novel surface microstructure wire electrode for improving machining efficiency and surface quality in WEDM[J]. Journal of Advanced Manufacturing Technology, 等级:Q2
11. Chen Z. et al. Improvement of the machining characteristics in WEDM based on specific discharge energy and magnetic field assisted method [J]. Journal of Advanced Manufacturing Technology, 等级:Q2
10.Chen Z. ZhangY. , et al. Modeling and reducing workpiece corner error due to wire deflection in WEDM rough corner-cutting [J] Journal of Manufacturing Processes, 2018, 36:557-564. 等级:Q1
9. Chen Z, Zhang G, Han F, et al. Determination of the optimal servo feed speed by thermal model during multi-pulse discharge process of WEDM[J]. International Journal of Mechanical Sciences, 2018.等级:Q1
8. Zhang G, Zhang Y, Chen Z, et al. Magnetic-assisted method and multi-objective optimization for improving the machining characteristics of WEDM in trim cutting magnetic material[J]. Wireless Internet Technology, 2017:1-18.(通讯作者) 等级:Q2
7. Chen Z, Zhang G. Study on magnetic field distribution and electro-magnetic deformation in wire electrical discharge machining sharp corner workpiece[J]. International Journal of Advanced Manufacturing Technology, 2018:1-11. 等级:Q2
6. Chen Z, Zhang G, Yan H. A high-precision constant wire tension control system for improving workpiece surface quality and geometric accuracy in WEDM[J]. Precision Engineering, 2018. 等级:Q1
5. Chen Z, Huang Y, Han F, et al. Numerical and experimental investigation on laser transmission welding of fiberglass-doped PP and ABS[J]. Journal of Manufacturing Processes, 2018, 31: 1-8. 等级:Q1
4. Chen Z, Zhang Y, Zhang G, et al. Theoretical and experimental study of magnetic-assisted finish cutting ferromagnetic material in WEDM[J]. International Journal of Machine Tools & Manufacture, 2017, 123.等级:Q1 Top1
3. Chen Z, Huang Y, Huang H, et al. Three-dimensional characteristics analysis of the wire-tool vibration considering spatial temperature field and electromagnetic field in WEDM[J]. International Journal of Machine Tools & Manufacture, 2015, 92:85-96. 等级:Q1 Top1
2. Chen Z, Huang Y, Zhang Z, et al. An analysis and optimization of the geometrical inaccuracy in WEDM rough corner cutting[J]. International Journal of Advanced Manufacturing Technology, 2014, 74(5-8):917-929. 等级:Q2
1. Zhang G, Chen Z, Zhang Z, et al. A macroscopic mechanical model of wire electrode deflection considering temperature increment in MS-WEDM process[J]. International Journal of Machine Tools & Manufacture, 2014, 78(3):41-53. (博士期间,导师第一作者,本人第二作者) 等级:Q1 Top1