近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
G. Chen, Z. Feng, J. Chen, L. Liu, H. Li, Q. Liu, S. Zhang, X. Cao, G. Zhang, Q. Shi, Analytical approach for describing the collapse of surface asperities under compressive stress during rapid solid state bonding. Scripta Materialia, 2017. 128: p. 41-44.
Zhu, Yucan; Chen, Gaoqiang; Chen, Qilong; Zhang, Gong; Shi, Qingyu. Simulation of material plastic flow driven by non-uniform friction force during friction stir welding and related defect prediction. Materials & Design, v108, p400-410, Oct, 2016.
Chen, Gaoqiang; Feng, Zhili; Zhu, Yucan; Shi, Qingyu. An Alternative Frictional Boundary Condition for Computational Fluid Dynamics Simulation of Friction Stir Welding. Journal of Materials Engineering and Performance. v25, n9, p4016-4023, Sep, 2016.
Chen, GQ; Shi, QY; Li, YJ; Han, ZD; Yuan, KY. Experimental investigations on the kinetics of void shrinkage in solid state bonding of AA6061 at high temperatures and high pressures. Materials & Design, v89, p1223-1226, Jan 2016.
Li, H.; Dai, Q. -L.; Shi, Q. –Y. Experimental study on the heterogeneity of mechanical properties of friction stir welded joints with the digital image correlation method. Strength of materials, v47, n1, p80-86, Jan 2015.
Dai, Q. L.; Wang, X. Y.; Hou, Z. G.; Wu, J.J.; Shi, Q.Y. Microcavities accompanying a zigzag line in friction stir welded A6082-T6 alloy joint. Science and technology of welding and joining. V20, n1, p68-74, Jan 2015.
戴启雷, 梁志芳, 吴建军, 史清宇. Al-Mg-Si合金搅拌摩擦焊接头DSC测试过程中组织变化及能量释放分析. 金属学报, v50, n5, p587-593, May, 2014.
Chen, G. Q.; Shi, Q. Y.; Fujiya, Y.; Simulation of Metal Flow During Friction Stir Welding Based on the Model of Interactive Force Between Tool and Material. Journal of materials engineering and performance. v23, n4, p1321-1328. Apr, 2014
Chen, G.Q.; Shi, Q.Y.; Li, Y.J.; Sun, Y.J.; Dai, Q.L.; Jia, J.Y.; Zhu, Y.C.; Wu, J.J.. Computational fluid dynamics studies on heat generation during friction stir welding of aluminum alloy. Computational Materials Science, v 79, p 540-546, Nov，2013.
Dai, QL; Chen, GQ; Meng, LC; Shi, QY. Explore the mechanism of high fatigue crack propagation rate in fine microstructure of friction stir welded aluminum alloy. Materials science and engineering A, v 580, p 184-190, Sep. 15, 2013.
Liu, P; Shi, QY; Zhang, YB. Microstructural evaluation and corrosion properties. of aluminum matrix surface composite adding Al-based amorphous fabricated by friction stir processing. Composites Part B-Engineering Vol.52 ,p 137-143; Sep. 2013
Ji, S.D.; Shi, Q.Y.; Zhang, L.G.; Zou, A.L.; Gao, S.S.; Zan, L.V. Numerical simulation of material flow behavior of friction stir welding influenced by rotational tool geometry. Computational Materials Science, v 63, p 218-226, October 2012
Sun, K. ; Shi, Q.Y.; Sun, Y.J.; Chen, G.Q. Microstructure and mechanical property of nano-SiCp reinforced high strength Mg bulk composites produced by friction stir processing. Materials Science and Engineering A, v 547, p 32-37, June 15, 2012
孙延军, 李德成, 张增磊, 鄢东洋, 史清宇. MTFM的建立及在铝合金筒体结构焊接变形预测中的应用. 金属学报，2011年11月, Vol. 47 (11): 1403-1407.
Yan Dong-yang, Wu Ai-ping, Silvanus Juergen, Shi Qing-yu, Predicting residual distortion of aluminum alloy stiffened sheet after friction stir welding by numerical simulation. Materials & Design. April 2011, v 32, n 4: p2284-2291.
康旭，史清宇，孙凯，王鑫. 包Al层聚集对搅拌摩擦焊接头力学性能的影响. 金属学报，2010年12月, V46(12): 1517-1521.
张增磊, 史清宇, 鄢东洋, 蔡志鹏, 李德成. 夹具拘束模型在焊接过程有限元分析中的建立及应用. 金属学报，2010年2月，Vol. 46, No.02. p189-194.
Xuedong Wang, Qingyu Shi, Xin Wang, Zenglei Zhang. The influences of precrack orientations in welded joint of Ti-6Al-4V on fatigue crack growth. Materials Science and Engineering A. Feb 2010, Vol.527, No. p1008-1015.
鄢东洋，史清宇，吴爱萍，Juergen Silvanus. 搅拌头机械载荷在搅拌摩擦焊接中的作用的数值分析. 金属学报. 2009年8月, Vol.45, No.8: p994~999.
鄢东洋，史清宇，吴爱萍 等. 铝合金薄板搅拌摩擦焊接残余变形的数值分析. 金属学报. 2009年2月, Vol.45, No.2, p183-188.
W. Wang, Q.Y. Shi, etc. A novel way to produce bulk SiCp reinforced aluminum metal matrix composites by friction stir processing. Journal of materials processing technology. Feb. 2009, Vol 209(4).p2099-2103
Liu Peng, Shi Qing-yu, Wang Wei, etc. Microstructure and XRD analysis of FSW joints for copper T2/aluminium 5A06 dissimilar materials. Materials Letters, Sep. 2008, Vol 62(25), p 4106-4108
Q.Y. Shi, J. Silvanus, Y. Liu, etc. Experimental study on distortion of Al-6013 plate after friction stir welding. Science and technology of welding and joining. Sep. 2008, Vol. 13(5), p 472-478
Z.L. Zhang, J. Silvanus, H.K. Li, Q.Y. Shi. Sensitivity analysis of history dependent material mechanical models for numerical simulation of welding process. Science and technology of welding and joining. Sep. 2008, Vol. 13(5), p 422-429
T. Li, Q.Y. Shi, H.K. Li. Residual stresses simulation for friction stir welded joint. Science and technology of welding and joining. Nov. 2007, Vol. 12(8), p664-670
京公网安备 11010802027423号