张建富 - 清华大学 - 机械工程系

个人简介

教育背景 2005.9~2009.5 清华大学精密仪器与机械学系机械工程专业工学博士 2001.9~2004.3 沈阳理工大学机械工程学院机械设计与制造专业工学硕士 1995.9~1999.8 沈阳理工大学机械设计系机械设计与制造专业工学学士工作履历 2014.01~至今清华大学机械工程系副教授 2014.03~2015.03 University of California, Berkeley，ME 访问学者 2013.01~2013.12 清华大学机械工程系助理研究员 2011.06~2012.12 清华大学精密仪器与机械学系助理研究员 2009.06~2011.05 清华大学精密仪器与机械学系博士后（助理研究员） 1999.09~2005.08 沈阳理工大学机械工程学院助教、讲师奖励与荣誉以主要完成人获得省部级科学技术奖励七项。其中：中国兵器工业科技进步奖二等奖两项（2008年、2004年）；辽宁省科学技术奖二等一项（2008年）、三等两项（2007年、2006年）；中国国防科学技术奖三等一项（2004年）；辽宁省国防科技进步奖一等一项（2003年）

研究领域

超声加工技术与装备制造装备性能分析、测试与优化制造系统信息集成

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

W.C. Cai, J. F. Zhang, P.F. Feng, et al. A bilateral capacitance compensation method for giant magnetostriction ultrasonic processing system. International Journal of Advanced Manufacturing Technology (2016). doi:10.1007/s00170-016-9602-4. J.P. Liao, J.F Zhang, P.F. Feng, et al. Identification of contact stiffness of shrink-fit tool-holder joint based on fractal theory. International Journal of Advanced Manufacturing Technology (2016). doi:10.1007/s00170-016-9506-3. P.F. Feng, J.J. Wang, J.F Zhang, J. et al. Drilling induced tearing defects in rotary ultrasonic machining of C/SiC composites. Ceramics International(2016).doi:10.1016/j.ceramint.2016.10.010 J.J. Wang, P.F. Feng, J.F. Zhang, et al. Investigations on the critical feed rate guaranteeing the effectiveness of rotary ultrasonic machining, Ultrasonics (2016). doi: 10.1016/j.ultras.2016.10.0. J.P., Liao, J.F Zhang, P.F. Feng, et al. (2016) Interface contact pressure-based virtual gradient material model for the dynamic analysis of the bolted joint in machine tools. Journal of Mechanical Science and Technology 30(10):4511-4521. J.F. Zhang, D. Wang, P.F. Feng, Z.J. Wu. C.L. Zhang (2015). Material Removal Characteristics of KDP Crystal in Ultrasonic Vibration-Assisted Scratch Process, Materials and Manufacturing Processes. 31(8): 1037–1045. J.F. Zhang, D. Wang, P.F. Feng et al. (2015). Effect of processing parameters of rotary ultrasonic machining on surface integrity of potassium dihydrogen phosphate crystals. Advances in Mechanical Engineering. 7(9): 1-10. J. J. Wang, J.F. Zhang, P.F. Feng, et al. (2015). Modeling and simulation for the critical bending force of power chucks to guarantee high machining precision. International Journal of Advanced Manufacturing Technology. 79(5-8): 1081-1094. H. Guo, J.F. Zhang, P.F. Feng, Z.J. Wu, D.W. Yu (2015). A virtual material-based static modeling and parameter identification method for a BT40 spindle–holder taper joint. The International Journal of Advanced Manufacturing Technology. 81(1): 307-314. C. Xu, J.F. Zhang, D.W. Yu, Z.J. Wu, P.F. Feng (2015). Dynamics prediction of spindle system using joint models of spindle tool holder and bearings. Proc IMechE Part C: J Mechanical Engineering Science. 229(17): 3084-3095. C. Xu, J.F. Zhang, P.F. Feng, D.W. Yu, Z.J. Wu (2014). Characteristics of stiffness and contact stress distribution of a spindle-holder taper joint under clamping and centrifugal forces, International Journal of Machine Tools & Manufacture. 82-83:21-28. D.X. Li, J.F. Zhang, Y.L. Zhang, P.F. Feng (2014). Modeling, identification and compensation for geometric errors of laser annealing table, Journal of Central South University. 21(3): 904-911. J.F. Zhang, P.F. Feng, C. Chen, D.W. Yu, Z.J. Wu (2013). A method for thermal performance modeling and simulation of machine tools. The International Journal of Advanced Manufacturing Technology, 68(5-8):1517–1527. J.F. Zhang, P.F. Feng, Z.J. Wu, D.W. Yu, C. Chen (2013). Thermal structure design and analysis of a machine tool headstock. MECHANIKA, 19(4): 478-485. C. Xu, J.F. Zhang, Z.J. Wu, D.W. Yu, P.F. Feng (2013). Dynamic modeling and parameters identification of a spindle–holder taper joint. The International Journal of Advanced Manufacturing Technology. 67(5-8): 1517-1525. C.L. Zhang, J.F. Zhang, P. F. Feng (2013). Mathematical model for cutting force in rotary ultrasonic face milling of brittle materials. The International Journal of Advanced Manufacturing Technology, 69(1-4): 161-170. J.F. Zhang, Z.M. Chen, P.F. Feng, W.H. Xu (2013). The Characteristics of Titanium Alloy Chip-Breaking by Orthogonal Cutting with a Surface-Textured Cutting Tool. Applied Mechanics and Materials, 365-366, 1235-1239. Z.M. Chen, J.F. Zhang, P.F. Feng, Z.J. Wu (2013) A Simulation Study on the Effect of Micro-textured Tools during Orthogonal Cutting of Titanium Alloy Ti-6Al-4V. Applied Mechanics and Materials, 281: 389-394. Y. M. Zhao, J. F. Zhang, P. F. Feng (2013). Study on Collaborative Simulation of Excavation System of the Shield Machine in Composite Strata. Intelligent Robotics and Applications, Lecture Notes in Computer Science, 8103: 614-622. C. Zhang, J.F. Zhang, P.F. Feng, D.W. Yu, Z.J. Wu (2013). Research on modeling and optimization of a dual chamber air spring vibration isolation system. Advanced Materials Research. 702: 310-317. J.F. Zhang, Z.J. Wu, P.F. Feng (2012). Research of Product Tracking Frameworks and Models in Production Logistics of Process Enterprises. Advances in Information Sciences and Service Sciences, 4(19): 139-150. S. Liu, J.F. Zhang, P.F. Feng, D.W. Yu, Z.J. Wu (2012) Determination of constitutive equation parameters for face milling 3-D simulation via pressure bar and orthogonal cutting tests. Materials Science Forum, 723: 136-142. G.Q. Liang, J.F. Zhang, P.F. Feng, D.Y. Yu, Z.J. Wu (2012) Experiment Research on Cutting Performance of High Volume Fraction SiCp/Al Composites in Rotary Ultrasonic Machining. Applied Mechanics and Materials, 184-185: 971-976. J.F. Zhang, Z.J. Wu, P. F. Feng, D.W. Yu (2011) Evaluation systems and methods of enterprise informatization and its application. Expert Systems with Applications, 38(7): 8938-8948. P.F. Feng, J.F. Zhang, Z.J. Wu, D.W. Yu (2011) An Improved Production Planning Method for Process Industries. International Journal of Production Research, 49(14): 4223-4243. C. Chen, J.F. Zhang, Z.J. Wu, P.F. Feng (2011) Real-time measurement of machine tool temperature fields and their effect on machining errors. MECHANIKA, 4, 2011: 413-417. J.F. zhang, Z.J. Wu, P.F. Feng, D.W. Yu (2011) Dynamic analysis and theoretical modelling of a plastic coated rectangle-shaped slideway. Applied Mechanics and Materials, 50-51: 37-41. Z.Y. Shen, J.F. Zhang, Z.J. Wu, P.F. Feng, C. Xu (2011) Modeling and experimental study on static characteristic of BT tool holder-spindle interface. Advanced Materials Research, 311-313: 726-731. J.F. Zhang, P.F. Feng, Z.J. Wu, D.W. Yu, K. Chen (2010) Activity based CIM Modeling and Transformation for Business Process Systems. International Journal of Software Engineering and Knowledge Engineering, 20(3): 289-309.