Kilbey, Mike - The University of Tennessee Knoxville

研究领域

Materials Chemistry, Neutron Sciences, Synthetic Chemistry

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Chen, H.; Chen, J.; Yin, W.; Yu, X.; Shao, M.; Xiao, K.; Hong, H.; Pickel, D.L.; Kochemba, W.M.; Kilbey, S.M. II; Dadmun, M. “Correlation of Polymeric Compatibilizer Structure to its Impact on the Morphology and Function of P3HT:PCBM Bulk Heterojunctions”, J. Mater. Chem. A, 2013, 1, 5309. Ramanathan, M.; Kilbey, S. M. II; Darling, S. B. “Process Controlled Multiscale Morphologies in Metal‐containing Block Copolymer Thin Films”, J. Nanosci. & Nanotech. 2012. Kochemba, W.M.; Pickel, D.L.; Sumpter, B.G.; Chen, J.; Kilbey, S.M. II “In-situ formation of pyridyl-functionalized poly(3-hexylthiophene)s via quenching of the Grignard metathesis polymerization: Toward ligands for semiconductor quantum dots”, Chem. Mater. 2012, 24, 4459. Kochemba, W.M.; Pickel, D.L.; Kilbey, S.M. II “End-group composition of poly(3-hexylthiophene)s prepared by in situ quenching of the Grignard metathesis polymerization: Influence of additives and reaction conditions”, J. Polym. Sci., Part A: Polym. Chem. 2012, 50, 2762. Alonzo, J.; Chen, J.; Messman, J.; Yu, X.; Hong, K.; Deng, S.; Swader, O.; Dadmun, M.; Ankner, J. F.; Britt, P.; Mays, J. W.; Malagoli, M.; Sumpter, B. G.; Brédas, J. L.; Kilbey, S. M. II “Assembly andCharacterization of Well Defined High Molecular Weight Poly(pphenylene) Polymer Brushes”, Chem. Mater. 2011, 23(19), 4367‐4374. He. Z.; Xiao, K.; Durant, W.; Hensley, D. K.; Anthony, J. E.; Hong, K.; Kilbey, S. M. II; Chen, J.; Li, D. “Enhanced Performance Consistency in Nanoparticle/TIPS Pentacene‐Based Organic Thin Film Transistors”, Adv. Funct. Mater. 2011, 21(19), 3617‐3623. He, L.; Hinestrosa, J. P.; Pickel, J. M.; Zhang, S.; Bucknall, D. G.; Kilbey, S. M.; Mays, J. W.; Hong, K. “Fluorine‐Containing ABC Linear Triblock Copolymers: Synthesis and Selfassembly in Solutions”, J. Poly. Sci.: Part A.: Polym. Chem. 2011, 49, 414‐422. Hinestrosa, J. P.; Alonzo, J.; Osa, M.; Kilbey, S. M. II “Solution Behavior of Polystyrene‐ Polyisoprene Miktoarm Block Copolymers in a Selective Solvent for Polyisoprene”, Macromolecules 2010, 43, 7294‐7304. Verduzco, R.; Luchette, P.; Hong, S. H.; Harden, J.; DiMasi, E.; Palfy‐Muhoray, P.; Kilbey, S. M. II; Sprunt, S.; Gleeson, J. T.; Jakli, A. “Bent‐Core Liquid Crystal Elastomers”, J. Mater. Chem. 2010, 20, 8488‐8495. Tosh, D. K.; Yoo, L. S.; Chinn, M.; Hong, K.; Kilbey, S. M. II; Barrett, M. O.; Fricks, I. P.; Harden, T. K.; Gao, Z.‐G.; Jacobson, K. A. “Polyamidoamine (PAMAM) Dendrimer Conjugates of “Clickable” Agonists of the A3 Adenosine Receptor and Coactivation of the P2Y14 Receptor by a Tethered Nucleotide”, Bioconj. Chem. 2010, 21, 372‐384. Hinestrosa, J. P.; Alonzo, J.; Mays, J.; Kilbey, S. M. II “Role of Surface Reorganization on Preferential Adsorption of Macromolecular Ensembles at the Solid/Fluid Interface”, Macromolecules 2009, 42, 7913–7918. Alonzo, J.; Mays, J. W.; Kilbey, S. M. II “Forces of Interaction between Surfaces Bearing Looped Polymer Brushes in Good Solvent”, Soft Matter 2009, 5, 1897‐1904. Rahane, S. B.; Floyd, J. A.; Metters, A. T. Kilbey, S. M. II "Swelling Behaviour of Multiresponsive Poly(methacrylic acid)-block-poly(N-isopropylacrylamide) Brushes Synthesized Using Surface-Initiated Photoiniferter-Mediated Photopolymerization", Advanced Functional Materials 2008, in press. Huang, Z.; Alonzo, J.; Liu, M.; Lay, M.; Ji, H.; Zhang, Y.; Yin, F.; Smith, G. D.; Mays, J. W.; Kilbey, S. M. II; Dadmun, M. D. "Density Profile of "Looped" Triblock Copolymer Brushes at the Liquid-Solid Interfaces By Neutron Reflectivity Measurements", Macromolecules 2008, 41, 1745-1752. Ji, H.; Sakellariou, G.; Advincula, R. C.; Smith, G. D.; Kilbey, S. M. II; Dadmun, M. D.; Mays, J. W. "Synthesis and Characterization of Well-defined [Polystyrene-b-poly(2-vinylpyridine)]n Star-Block Copolymers with Poly(2-vinylpyridine) Corona Blocks", J. Poly. Sci.: Part A. Polym. Chem. 2007, 45(17), 3949-3955. Yin, F.; Bedrov, D.; Smith, G. D.; Kilbey, S. M. II "A Langevin Dynamics Simulation Study of the Tribology of Polymer Loop Brushes", J. Chem. Phys. 2007, 127, 084910. Ji, H.; Farmer, B. S.; Nonidez, W. K.; Advincula, R. C.; Smith, G. D.; Kilbey, S. M. II; Dadmun, M. D.; Mays, J. W.; "Anionic Synthesis of Epoxy End-Capped Polymers", Macromol. Chem. Phys. 2007, 208, 807-814. Sankhe, A. Y.; Husson, S. M.; Kilbey, S. M. II “Direct Polymerization of Surface-Tethered Polyelectrolyte Layers in Aqueous Solution via Surface-Confined ATRP”, J. Poly. Sci. Part A.: Polym. Chem. 2007, 4, 566-575. Rahane, S. B.; Metters, A. T.; Kilbey, S. M. II “Impact of Added Tetraethyliuram Disulfide Deactivator on the Kinetics of Growth and Reinitiation of Poly(methyl methacrylate) Brushes Made by Surface-Initiated Photoiniferter-Mediated Photopolymerization”, Macromolecules 2006, 39, 8987-8991. Alonzo, J.; Huang, Z.; Liu, M.; Mays, J. W.; Toomey, R. G.; Dadmun, M. D.; Kilbey, S. M. II “Looped Polymer Brushes Formed by Self Assembly of Poly(2-vinylpyridine)-polystyrene-poly(2-vinylpyridine) Triblock Copolymers at the Solid-Fluid Interface. 1. Kinetics of Preferential Adsorption”, Macromolecules 2006, 39, 8434-8439. Sankhe, A. Y.; Husson, S. M.; Kilbey II, S. M. Effect of Catalyst Deactivation on Polymerization of Electrolytes by Surface-Confined Atom Transfer Radical Polymerization in Aqueous Solutions,Macromolecules 2006, 39, 1376-1383. Forster, A. M.; Mays, J. W.; Kilbey II, S. M. Effect of Temperature on the Shearing of Polystyrene Brushes,Journal of Polymer Science: Part B- Polymer Physics 2006, 44, 649-654.