王柯 - 重庆大学 - 材料科学与工程学院

个人简介

学习工作经历 2004.09 - 2008.06 西北工业大学材料科学与工程学院工学学士 2008.09 - 2014.06 西北工业大学材料科学与工程学院工学博士（硕博连读） 2014.07 - 2017.08 重庆大学材料科学与工程学院材料加工系讲师 2014.09-至今重庆大学材料科学与工程学院材料加工系副教授

研究领域

钛合金微观组织精细化表征；钛合金高温变形和热处理一体化工艺、及组织遗传性研究；钛合金双相体系变形机制原位研究；钛合金组织-性能关系定性和定量研究。

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

M. Wu, R. Xin, Y. Wang, Y. Zhou, K. Wang*, Q. Liu, Microstructure, texture and mechanical properties of commercial high-purity thick titanium plates jointed by electron beam welding, Materials Science and Engineering: A, 677(2016) 50-57. K. Wang*, M. Li, Q. Liu, Evolution mechanisms of the primary α and β phases during α/β deformation of an α/β titanium alloy TC8, Materials Characterization, 120 (2016) 115-123 K. Wang*, D.L. Sun, Y.L. Wu, R.L. Xin, M.Y. Wu, Q. Liu，Correlation between flow behavior and microstructure evolution during α/β deformation of TA19 titanium alloy, Advanced Engineering Materials， K. Wang*, M.Q. Li, Characterization of discontinuous yielding phenomenon in isothermal compression of TC8 titanium alloy, Trans. Nonferrous Met. Soc. China, 26(2016) 1583-1588. K. Wang, M.Q. Li. Morphology and crystallographic orientation of the secondary α phase in a compressed α/β titanium alloy.Scripta Materialia, 68 (2013) 964-967 K. Wang, M.Q. Li. Effect of hot deformation and heat treatment on secondary α phase evolution of TC8 titanium alloy. Materials Science and Engineering A, 613 (2014) 209-216 K. Wang, M.Q. Li. Flow behavior and deformation mechanism in the isothermal compression of the TC8 titanium alloy. Materials Science and Engineering A, 600 (2014) 122-128. K. Wang, M.Q. Li, J. Luo, C. Li. Effect of the δ phase on the deformation behavior in isothermal compression of superalloy GH4169. Materials Science and Engineering A, 528 (2011) 4723-4731. K. Wang, M.Q. Li, C. Li. The δ and austenite phase evolution and model in the solution treatment of superalloy GH4169. Materials Science and Technology, 29 (2013) 346-350 李晨, 李淼泉, 王柯. 固溶处理GH4169合金的高温变形行为. 航空学报, 31 (2010) 368-376 H.M. Li, M.Q. Li, J. Luo, K. Wang, Microstructure and mechanical properties of heat-treated Ti–5Al–2Sn–2Zr–4Mo–4Cr, Trans. Nonferrous Met. Soc. China, 25(2015) 2893-2900. W.J. He, C. Li, B.F. Luan, R.S. Qiu, K. Wang, Z.Q. Li, Q. Liu, Deformation behaviors and processing maps of CNTs/Al alloy composite fabricated by flake powder metallurgy, Trans. Nonferrous Met. Soc. China, 25(2015) 3578-3584.