刘庆 - 重庆大学 - 材料科学与工程学院

个人简介

学习工作经历 1987 - 1991年哈尔滨工业大学助教、讲师； 1991 - 1993年北京科技大学博士后、副教授（1992）； 1993 - 1999年丹麦Risø国家实验室材料研究部高级研究员、项目主管； 1999 - 2006年清华大学材料科学与工程系教授、博导，曾任清华大学金属材料研究所所长、教育部先进材料重点实验室副主任； 2006-2010年重庆大学教授、博士生导师、材料科学与工程学院院长； 2010-2011年重庆大学教授、博士生导师、校长助理、材料科学与工程学院院长； 2011- 至今重庆大学教授、博士生导师、校党委常委、副校长。

研究领域

形变金属微观组织结构表征的电子显微技术金属变形微观机理及力学行为工业金属板材织构形成机理及控制高温超导材料研制及应用金属塑性加工过程中组织结构与织构控制技术的应用

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

[1] Zhang XY, Wu XL, Liu Q, et al. Phase transformation accommodated plasticity in nanocrystalline nickel.APPLIED PHYSICS LETTERS, 2008, 93(3):31901 [2] Zhang XY, Zhu YT, Li C, et al.A study of the lattice constant of ZrO2during the oxidation of nanocrystalline zircaloy-4.RARE METAL MATERIALS AND ENGINEERING, 2008, 37(7):1149-1152. [3] Chen HS, Godfrey A, Hansen N, et al.Microstructure-grain orientation relationship in coarse grain nickel cold-rolled to large strain.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 483: 157-160. [4] Jiang J, Godfrey A, Liu W, et al.Microtexture evolution via deformation twinning and slip during compression of magnesium alloy AZ31.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 483: 576-579. [5] Jiang, J; Godfrey, A; Liu, W; et al. Identification and analysis of twinning variants during compression of a Mg-Al-Zn alloy.SCRIPTA MATERIALIA, 2008, 58:122-125. [6] Knudsen, T; Cao, WQ; Godfrey, A; et al. Stored energy in nickel cold rolled to large strains, measured by calorimetry and evaluated from the microstructure.METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2008, 39A:430-440. [7] Godfrey, A.; Li, X.L.; Liu, W.; et al. Development of the cube texture at low annealing temperatures in highly rolled pure nickel. Acta Materialia|Acta Materialia, 2007, 3531: 40. [8] Huang, GJ; Wang, LY; Huang, GS; et al. Effect of rolling and annealing on the mechanical properties and microstructure of AZ31 magnesium alloy.2006 BEIJING INTERNATIONAL MATERIALS WEEK, 2007, 546-549(1-4):379-382. [9] Huang, GJ; Wang, LY; Huang, GS; et al. Dynamic recrystallization of 3104 aluminum alloy during isothermal compression deformation at elevated temperatures.2006 BEIJING INTERNATIONAL MATERIALS WEEK,2007, 546-549(1-4) :1061-1064. [10] Jiang, J.; Godfrey, A.; Liu, Q. Effect of temperature on microstructure and texture during compression of AZ31. Materials Science Forum|Materials Science Forum, 2007, 245:8. [11] B.F. Luan, G.H. Wu, N. Hansen, A. Godfrey and T.Q. Lei. High strength Al2O3p/6061Al composites - effect of particles, subgrains and precipitates. Materials Science and Technology, 2007, 23: 233~236. [12] Li, XL; Liu, W; Godfrey, A; et al. Development of the cube texture at low annealing temperatures in highly rolled pure nickel.ACTA MATERIALIA, 2007,55(10):3531-3540. [13] Liu, TM; Xiao, P; Pan, FS; et al. Annealing behavior of the compressed AZ31 magnesium alloy with different strain.2006 BEIJING INTERNATIONAL MATERIALS WEEK, 2007,546-549 (1-4):267-270. [14] Xiao, P; Liu, TM; Peng, J; et al. Hot compression deformation simulation of AZ61B magnesium alloy.2006 BEIJING INTERNATIONAL MATERIALS WEEK, 2007,546-549 (1-4):373-377. [15] Chen, H.S.; Godfrey, A.; Hansen, N.; et al. Recovery and recrystallization as a function of deformed microstructure orientation in coarse grained cold-roiled Ni.Materials Science Forum, 2007,149:52. [16] Zhang, Y.B.; Godfrey, A.; Miodownik, M.A.; et al. Modeling of cube-texture evolution during grain growth in Ni thick-films based on experimental observations.Materials Science Forum, 2007,1043-1050.