肖柱 - 中南大学 - 材料科学与工程学院

个人简介

教育经历 2010.03-2013.12 工学博士利物浦大学（英国）工程学院 2008.09-2010.03 博士研究生中南大学材料科学与工程学院 2005.09-2007.12 工学硕士中南大学材料科学与工程学院 2001.09-2005.06 工学学士中南大学材料科学与工程学院

研究领域

有色金属新材料；形状记忆合金；高性能铜合金的设计、制备加工、相变、组织结构及性能表征。

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Xiao Z, Huang YJ，Chen C, Li Z*, Gong S, Huang YX, Zhang C, Zhang X. Effects of thermal treatments on the residual stress and micro-yield strength of Al2O3 dispersion strengthened copper alloy. Journal of Alloys and Compounds 2019;781:490-5. Yi J, Jia Y*, Zhao Y, Xiao Z*, He K, Wang Q, Wang M, Li Z*. Precipitation behavior of Cu-3.0Ni-0.72Si alloy. Acta Materialia, 2019;166:261-70. Gong S, Wu D, Li Y, Jin M, Xiao T, Wang Y, Xiao Z*, Zhu Z*, Li Z*. Temperature-independent piezoresistive sensors based on carbon nanotube/polymer nanocomposite. Carbon 2018; 172:188-195. Zhao Z, Xiao Z*, Li Z*, Ma M, Dai J. Effect of magnesium on microstructure and properties of Cu-Cr alloy. Journal of Alloys and Compounds 2018;752:191-7. Zhang Y, Xiao Z*, Zhao Y, Li Z*, Xing Y, Zhou K. Effect of thermo-mechanical treatments on corrosion behavior of Cu-15Ni-8Sn alloy in 3.5 wt% NaCl solution. Materials Chemistry and Physics 2017;199:54-66. Yuan Y, Li Z, Xiao Z*, Zhao Z, Yang Z. Microstructure evolution and properties of Cu-Cr alloy during continuous extrusion process. Journal of Alloys and Compounds 2017;703:454-60. Yuan Y, Li Z, Xiao Z*, Zhao Z. Investigations on Voids Formation in Cu–Mg Alloy During Continuous Extrusion. JOM 2017;69:1696-700. Li Y, Xiao Z*, Li Z*, Zhou Z, Yang Z, Lei Q. Microstructure and properties of a novel Cu-Mg-Ca alloy with high strength and high electrical conductivity. Journal of Alloys and Compounds 2017;723:1162-70. Lei Q, Xiao Z, Hu W, Derby B, Li Z. Phase transformation behaviors and properties of a high strength Cu-Ni-Si alloy. Materials Science and Engineering: A 2017;697:37-47. Gong S, Wang Y, Xiao Z, Li Z, Wang ZX, Lei RS, et al. Effect of temperature on the electrical property of epoxy composites with carbon nanotube. Composites Science and Technology 2017;149:48-54. Wang S, Chen C*, Jia YL, Xiao Z*, Wang MP, Li Z, et al. Effects of grain size on the microstructure and texture of cold-rolled Ta-2.5W alloy. International Journal of Refractory Metals and Hard Materials 2016;58:125-36. Si L, Zhou L, Zhu X, Sanhua L, Leinuo S, Qiyi D. Microstructure and property of Cu–2.7Ti–0.15Mg–0.1Ce–0.1Zr alloy treated with a combined aging process. Materials Science and Engineering: A 2016;650:345-53. Shen L, Li Z, Dong Q, Xiao Z, Chen C. Microstructure and texture evolution of novel Cu-10Ni-3Al-0.8Si alloy during hot deformation. Journal of Materials Research 2016;31:1113-23. Qiu WT, Pang Y, Xiao Z, Li Z. Preparation of W-Cu alloy with high density and ultrafine grains by mechanical alloying and high pressure sintering. International Journal of Refractory Metals and Hard Materials 2016;61:91-7. Lei Q, Li Z, Han L, Xiao Z, Xiao T. Effect of Aging Time on the Corrosion Behavior of a Cu-Ni-Si Alloy in 3.5 wt% NaCl Solution. Corrosion 2016;72:615-27. Chen W, Wang M, Li Z, Dong Q, Jia Y, Xiao Z, et al. A Novel Cu-10Zn-1.5Ni-0.34Si Alloy with Excellent Mechanical Property Through Precipitation Hardening. Journal of Materials Engineering and Performance 2016;25:4624-30. Yuan Y, Dai C, Li Z, Yang G, Liu Y, Xiao Z. Microstructure evolution of Cu-0.2Mg alloy during continuous extrusion process. Journal of Materials Research 2015;30:2783-91. Yang S, Zhou F, Xiao T, Xu D-b, Li Z, Xiao Z, et al. Surface modification with SiO2 coating on biomedical TiNi shape memory alloy by sol–gel method. Transactions of Nonferrous Metals Society of China 2015;25:3723-8. Xiang Z-q, Li Z, Lei Q, Xiao Z, Pang Y. High temperature mechanical behavior of alumina dispersion strengthened copper alloy with high content of alumina. Transactions of Nonferrous Metals Society of China 2015;25:444-50.