近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
（1） Jing Chen, Huiqun Liu*, Gaoyong Lin, Ruiqian Zhang*, Gang Li, Xun Dai, Shaoqiang Liu. Interfacial reactions between ZrSnNb and FeCrAl alloy during diffusion bonding, hot-rolling and annealing. Journal of Alloys and Compounds, 823 (2020) 153736, doi: https://doi.org/10.1016/j.jallcom.2020.153736
（2）Suping Pan, Huiqun Liu*, Yuqiang Chen*, Xiaoyong Zhang*, Kuiwai Chen, Danqing Yi. αs dissolving induced mechanical properties decay in Ti-55511 alloy during uniaxial fatigue. International Journal of Fatigue, 132 (2020) 105372
doi: https://doi.org/10.1016/j.ijfatigue.2019.105372
（3）Bo Jiang, Haisheng Wang, Danqing Yi*, Yu Tian, Fanghua Shen, Bin Wang, Huiqun Liu*, Zhan Hu. Effect of Ag addition on the age hardening and precipitation behavior in an Al-Cu-Li-Mg-Zn-Mn-Zr alloy. Materials Characterization, 162 (2020) 110184
https://doi.org/10.1016/j.matchar.2020.110184
（4）Jian Xun, Gaoyong Lin*, Huiqun Liu*, Siyu Zhao, Jing Chen, Xun Dai, Ruiqian Zhang. Texture evolution and dynamic recrystallization of Zr-1Sn-0.3Nb-0.3Fe-0.1Cr alloy during hot rolling. Acta Metallurgica Sinica (English Letters), 33, 215 (2020)
https://doi.org/10.1007/s40195-019-00964-6
（5）梁小龙, 潘钱付, 王辉, 郑继云, 张瑞谦, 刘会群*. 温轧FeCrAl钢退火组织演变对力学性能的影响. 钢铁研究学报, 2019年11月, 第31卷第11期: 1012-1022
DOI: 10.13228/j.boyuan.issn1001-0963.20190078
（6） Guijie Li, Bo Jiang, Huiqun Liu*, Liang Ning*, Danqing Yi, Xianming Wang, Zhiyuan Liu. Superhydrophobic surface with lotus/petal effect and its improvement on fatigue resistance of heat-resistant steel. Progress in Organic Coatings, 137 (2019) 105315 https://doi.org/10.1016/j.porgcoat.2019.105315
（7）Jing Chen, Yilan Jiang, Huiqun Liu*, Danqing Yi, Ruiqian Zhang*, Xun Dai, Shaoqiang Liu. Texture evolution of cold-rolled Zr-1Sn-0.3Nb-0.3Fe-0.1Cr alloy during annealing. Journal of Nuclear Materials, 524 (2019) 226-238
https://doi.org/10.1016/j.jnucmat.2019.06.038
（8）Zhan Hu, Xiyi Zhou, Xi-an Nie, Siyu Zhao, Huiqun Liu*, Danqing Yi**, Xiaoyong Zhang. Finer subgrain microstructure induced by multi-pass compression in α+β phase region in a near-β Ti-5Al-5Mo-5V-1Cr-1Fe alloy. Journal of Alloys and Compounds 788 (2019) 136-147
https://doi.org/10.1016/j.jallcom.2019.02.201
（9） Honglei Shuai, Jiayang Li, Wanwan Hong, Xu Gao, Guoqiang Zou, Jiugang Hu, Hongshuai Hou, Xiaobo Ji,* and Huiqun Liu*. Electrochemically Modulated LiNi1/3Mn1/3Co1/3O2 Cathodes for Lithium-Ion Batteries. Small Methods 2019, 1900065
https://doi.org/10.1002/smtd.201900065
（10）肖禹，刘会群*，易丹青，王俭，陈战乾，高颀. 应变路线对Ti-6242 合金组织与力学性能的影响. 金属热处理，第44卷第1期，2019年1月：96-101
DOI: 10.13251/j.issn.0254-6051.2019.01.022
（11）Yu Xiao, Huiqun Liu*, Danqing Yi, Jianwen Le, Hangwei Zhou, Yong Jiang, Xiaolong Zhao, Zhanqian Chen, Jian Wang, and Qi Gao. High temperature deformation behavior of Ti-6Al-2Sn-4Zr-2Mo alloy with lamellar microstructure under plane strain compression, Journal of Materials Engineering and Performance, (2018) 27:4941–4954
https://doi.org/10.1007/s11665-018-3573-6
（12）Bo Jiang, Gui-jie Li, Hui-qun Liu*, Dan-qing Yi, Ying Zhang, Ren-hao Xue, Quan Wen, Zhi-yuan Liu, Liang Ning, Xian-ming Wang. Superhydrophobic coating on heat-resistant steel surface fabricated by a facile method. Journal of Iron and Steel Research, International, (2018) 25:975–983.
https://doi.org/10.1007/s42243-018-0139-7
（13）Qian Zhao, Huiqun Liu, Chunping Wu*, Nana Li, Yong Jiang, Danqing Yi. Preferential oxidation of intermetallic compounds in Ag-2Sn-4La alloy. Corrosion Science 143 (2018) 177–186
https://doi.org/10.1016/j.corsci.2018.08.017
（14） Yacen Zhang, Huiqun Liu*, Danqing Yi, Bin Wang, Yong Jiang, Tao Hu, Yu Xiao, Qi Yang, Jian Wang, Qi Gao. Stress-induced α″ phase in a beta Ti-19Nb-1.5Mo-4Zr-8Sn alloy. Materials Characterization, 140 (2018): 247-258
https://doi.org/10.1016/j.matchar.2018.04.019
（15）Jing Chen, Huiqun Liu*, Ruiqian Zhang, Gang Li, Danqing Yi, Gaoyong Lin, Zhen Guo, Shaoqiang Liu. High-temperature deformation and processing maps of Zr-4 metal matrix with dispersed coated surrogate nuclear fuel particles. Results in Physics, 9 (2018): 1057-1066
https://doi.org/10.1016/j.rinp.2018.04.025
（16）Dongdong Li, Weifeng Wan, Lvqi Zhu, Yong Jiang*, Shouqi Shao, Gaojing Yang, Huiqun Liu**, Danqing Yi, Shuo Cao, Qingmiao Hu. Experimental and DFT characterization of interphase boundaries in titanium and the implications for ω-assisted α phase precipitation. Acta Materialia, 151 (2018) 406-415
https://doi.org/10.1016/j.actamat.2018.03.056
（17）Shang Fu, Ying Zhang, Huiqun Liu*, Danqing Yi, Bin Wang, Yong Jiang, Zhiquan Chen, Ning Qi. Influence of Electric Field on the Quenched-in Vacancy and Solute Clustering during Early Stage Ageing of Al-Cu Alloy. Journal of Materials Science & Technology 34 (2018) 335–343
https://doi.org/10.1016/j.jmst.2017.07.020
（18）Shang Fu, Huiqun Liu, Ning Qi, Bin Wang, Yong Jiang, Zhiquan Chen*, Tao Hu*, Danqing Yi*. On the electrostatic potential assisted nucleation and growth of precipitates in Al-Cu alloy. Scripta Materialia 150 (2018) 13–17
https://doi.org/10.1016/j.scriptamat.2018.02.017
（19）Yi-lan JIANG, Hui-qun LIU*, Dan-qing YI, Gao-yong LIN, Xun DAI, Rui-qian ZHANG, Yong-duo SUN, Shao-qiang LIU. Microstructure evolution and recrystallization behavior of cold-rolled Zr-1Sn-0.3Nb-0.3Fe-0.1Cr alloy during annealing. Trans. Nonferrous Met. Soc. China, 28(2018) 651-661
DOI: 10.1016/S1003-6326(18)64697-7
（20）Siyu Zhao, Huiqun Liu, Gaoyong Lin, Yilan Jiang, Jian Xun. Dynamic Recrystallization Behavior of Zr-1Sn-0.3Nb Alloy During Hot Rolling Process. JOM the Journal of the Minerals, Metals & Materials Society, Vol. 70, No. 7, 2018: 1106-1111
DOI: 10.1007/s11837-017-2659-1
（21）胡均，刘会群*，王斌，易丹青，田宇，王南海. 原位自生(Y2O3+TiB)/Ti-6Al-4V复合材料的组织与力学性能. 粉末冶金材料科学与工程，第23卷第6期，2018年12月：632-639
（22）Hangwei Zhou, Huiqun Liu*, Danqing Yi, YuXiao, Xiaolong Zhao, JianWang, QiGao. Effect of α phase on fatigue crack growth of Ti6242 alloy. Journal of Iron and Steel Research, International 24 (2017) 811-822
（23）Q. Xiao, H. Liu*, D. Yi, D. Yin, Y. Chen, Y. Zhang, B. Wang, Effect of Cu content on precipitation and age-hardening behavior in Al-Mg-Si-xCu alloys, Journal of Alloys and Compounds, 695 (2017) 1005-1013
http://dx.doi.org/10.1016/j.jallcom.2016.10.221
（24）Xian Nie, Huiqun Liu*, Xiaozhou Zhou, Danqing Yi, Baiyun Huang, Zhan Hu, Yanfei Xu, Qi Yang, Dingchun Wang, Qi Gao. Creep of Ti-5Al-5Mo-5V-1Fe-1Cr alloy with equiaxed and lamellar microstructures. Materials Science and Engineering A, 651 (2016) 37-44
http://dx.doi.org/10.1016/j.msea.2015.10.092
（25）Deyan Yin, Huiqun Liu*, Yuqiang Chen, Danqing Yi, Bo Wang, Bin Wang, Fanghua Shen, Shang Fu, Cong Tang, Suping Pan. Effect of grain size on fatigue-crack growth in 2524 aluminium alloy. International Journal of Fatigue, 84 (2016) 9-16
http://dx.doi.org/10.1016/j.ijfatigue.2015.11.011
（26）Ruowei Yi, Huiqun Liu*, Danqing Yi, WeifengWan, BinWang, Yong Jiang, Qi Yang, DingchunWang, Qi Gao, Yanfei Xu, Qian Tang. Precipitation hardening and microstructure evolution of the Ti-7Nb-10Mo alloy during aging. Materials Science and Engineering C, 63 (2016) 577-586
http://dx.doi.org/10.1016/j.msec.2016.03.030
（27）Deyan Yin, Qiao Xiao, Yuqiang Chen, Huiqun Liu*, Danqing Yi, Bin Wang, Suping Pan. Effect of natural ageing and pre-straining on the hardening behavior and microstructural response during artificial ageing of an Al-Mg-Si-Cu alloy. Materials and Design, 95 (2016) 329-339
http://dx.doi.org/10.1016/j.matdes.2016.01.119
（28）Weifeng Wan, Danqing Yi, Huiqun Liu*, Yong Jiang, Ruowei Yi, Qi Yang, Dingchun Wang, Qi Gao, Yanfei Xu. Observation and characterization of isothermal α″ in a new β-type titanium alloy. Philosophical Magazine Letters, pages 90-96, Volume 96, Issue 3, 2016
http://dx.doi.org/10.1080/09500839.2016.1157635
（29）周晓舟, 易丹青, 刘会群*, 王斌, 高颀, 王鼎春. 显微组织对TC18 钛合金高温力学性能的影响. 热加工工艺，2016 年3 月第45 卷第6 期：98-101
（30）Weifeng Wan, Huiqun Liu*, Yong Jiang, Danqing Yi, Ruowei Yi, Qi Gao, Dingchun Wang, Qi Yang. Microstructure characterization and property tailoring of a biomedical Ti–19Nb–1.5Mo–4Zr–8Sn alloy. Materials Science and Engineering A, 637 (2015) 130-138
http://dx.doi.org/10.1016/j.msea.2015.04.020
（31）Chun FENG, Wen-bin SHOU, Hui-qun LIU*, Dan-qing YI, Yao-rong FENG. Microstructure and mechanical properties of high strength Al-Zn-Mg-Cu alloys used for oil drill pipes. Transactions of Nonferrous Metals Society of China, 25 (2015) 3515-3522
DOI: 10.1016/S1003-6326(15)63994-2
（32）田哲，易丹青，刘会群*，王斌，涂晓萱，江勇，唐聪. 固溶处理对Al-5.8Cu-0.6Mg-0.6Ag-0.3Nd合金组织和力学性能的影响. 中国有色金属学报，第25卷第9期，2015年9月
（33）Nie Xi-an, Hu Zhan, Liu Hui-qun*, Yi Dan-qing, ChenTi-ying, Wang Bingfeng, Gao Qi, Wang Ding-chun. High temperature deformation and creep behavior of Ti-5Al-5Mo-5V-1Fe-1Cr alloy. Materials Science and Engineering A, 613 (2014) 306-316
http://dx.doi.org/10.1016/j.msea.2014.06.116
（34）Xiangming Chen, Huiqun Liu*, Qinghua Guo, Shunping Sun. Oxidatoin behavior of WC-Co hard metal with designed multilayer coatings by CVD, Int. Journal of Refractory Metals and Hard Materials, 31 (2012) 171-178
doi:10.1016/j.ijrmhm.2011.10.012
（35）XU Yan-fei, LIU Hui-qun*, YI Dan-qing, ZHU Zhi-shou, ZHENG Feng. Antiphase boundary-like structure in α″ martensite of TC21 titanium alloy. Transactions of Nonferrous Metals Society of China, 22 (2012) 1366-1371
DOI: 10.1016/S1003-6326(11)61327-7
（36）Y.F. Xu, D.Q. Yi, H.Q. Liu, X.Y. Wu, B. Wang, F.L. Yang. Effects of cold deformation on microstructure, texture evolution and mechanical properties of Ti-Nb-Ta-Zr-Fe alloy for biomedical applications. Materials Science and Engineering A, 547 (2012) 64-71
http://dx.doi.org/10.1016/j.msea.2012.03.081
（37）Y.F. Xu, D.Q. Yi, H.Q. Liu, B. Wang, F.L. Yang. Age-hardening behavior, microstructural evolution and grain growth kinetics of isothermal ω phase of Ti-Nb-Ta-Zr-Fe alloy for biomedical applications. Materials Science and Engineering A, 529 (2011) 326-334
doi:10.1016/j.msea.2011.09.035
（38）Xian Nie, Huiqun Liu*, Danqing Yi, Qi Gao, Xianmin Li. The Influence of Sc on Deformation Stability of Ti-6Al-4V Alloy Using Processing Map. Proceedings of the 12th World Conference on Titanium, 2011, Volume I, pp.645-649
（39）Y.F. Xu, D.Q. Yi, H.Q. Liu, B. Wang, F.L. Yang. Effect of aging temperature on microstructure and mechanical properties of Ti-Nb-Ta-Zr-Fe alloy for biomedical applications. Proceedings of the 12th world conference on Titanium, 2011, Volume Ⅲ, pp. 2126-2129
（40）H.Q. Liu*, D.Q. Yi, F. Zheng. The influence of Sc on α/β transformation of Ti . Materials Science and Engineering A, 487 (2008) 58-63
doi:10.1016/j.msea.2007.09.068
（41）LIU Hui-qun，YI Dan-qing，WANG Wei-qi etal. Influence of Sc on high temperature strengthening behavior of Ti-6Al-4V alloy. Transactions of Nonferrous Metals Society of China, Vol.17, No.6, 2007: 1212-1219.
（42）刘会群，易丹青，肖来荣等。MoSi2基复合材料的制备技术。中国材料科技与设备，2007年1月，第4卷，第1期。
（43）易丹青，刘会群，肖来荣等。MoSi2基复合材料组织性能的研究进展。材料导报，2006年11月，第20卷专辑VII。
（44）刘会群，易丹青，肖来荣等。铸态Ti-Sc二元合金的组织特征、相结构和显微硬度。中国有色金属学报，第15卷第3期，2005年3月。
（45）刘会群，易丹青，魏鎏英等。金属Sc对Ti-6Al-4V合金组织演变与性能的影响。中南大学学报（自然科学版），第36卷第3期，2005年3月。
（46）易丹青，刘会群。稀土元素在钛合金中的存在形式及作用机理。稀有金属材料与工程，第34卷，2005年10月。
（47）刘会群，易丹青，卢斌等。Sc对Ti-Al二元合金组织与显微硬度的影响。金属热处理，第29卷第8期，2004年。
（48）Huiqun Liu, Danqing Yi. Influence of Metal Sc on Microstructure and Property of As-cast Titanium Alloys. Proceedings of the First China-Korea Bi-lateral Symposium on Light Metals and Nano Materials, Zhang Jiajie, Hunan, P.R.China, April 2-5, 2003.
京公网安备 11010802027423号