王孟君 - 中南大学 - 材料科学与工程学院

个人简介

曾任中南大学材料加工教研室主任，材料加工研究所所长; 现任材料加工工程系书记; 中国模具工业协会委员; 中国有色金属材料学会材料加工委员会委员; 广东省有色金属学会铝加工专业委员会专家; 国家自然科学基金评审专家; 承担过多项国家级、省部级科研项目，特别是与国内大型铝挤压加工企业开展了广泛的产学研合作，取得了突出成绩。

研究领域

铝合金塑性成形理论及组织演变规律研究；铝合金挤压成形过程数值模拟与仿真；模具CAD/CAE；汽车用铝合金板冲压成形性能研究等。

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

1. Simulation of extrusion process of complicated aluminium profile and die tria. Transactions of Nonferrous Metals Society of China 2012(22)1732-1737 2. TTP curves and Microstructural Evolution Mechanism After Quenching in Aluminium Alloy 6082. Metallography, Microstructural,and Analysis 2012(1)165-169 3. Prediction of the flow stress of Al6061 at hot deformation conditions. Materials Science and Engineering A 2011 05 ISSN 0921-5093 4. An Application of ANFIS to Predict the Hot Flow Behavior of 6063 Aluminum Alloy. Journal of Materials Engineering and Performance DOI: 10.1007/s11665-011-0033-y July 19, 2011 5.Effect of pre-aging on microstructure and properties of 2000 series aluminum alloy for automotive body sheets. Transactionsof Nonferrous Metals Society of China December 2007 Volume17 Special 1 7.Deformation simulation of low-temperature high-speed extrusion for 6063 Al alloy. Journal of Central South University of Technology 2010.05 8.Numerical simulation of upsetting-extruding process of dispersion strengthened copper welding electrode. Transactions of Nonferrous Metals Society of China June 2007. 03 10.Deformation behavior of 6063 aluminum alloy during high-speed compression. J.Wuhan Univ.Technol. Material Science edition 2005.3 11.Deformation Behavior of dispersion-strengthened copper at high temperature. Rare Metals 2006.06 12.Study on WC dispersion-strengthened copper. Rare Metal 2004.3 13.Constitutive equation for hot deformation of aluminum oxide dispersion strengthened copper. J.Cent. South Univ.Technol. 2000.2