刘志义 - 中南大学 - 材料科学与工程学院

个人简介

曾在韩国材料科学研究院（KIMS）任客座研究员。从1987年起至今，一直从事铝合金的基础研究及应用技术开发。分别主持、参与完成了国家重大863项目、国家973项目、国家自然科学基金项目、国防重点攻关项目及国家大飞机工程的铝合金研制项目。发明了新一代耐热铝合金2A43，及其铸造改型铝合金ZNZL212。与企业合作开发了第一根国产高强耐热铝合金石油钻探管，并取得钻探试验成功。与企业合作研制了×××铝合金型材与厚板及×××铝合金薄板，已经分别成功应用于空警-2000预警机壁板和成功首飞的运-20运输机壁板上。工作经历 1979.9~1983.7 湘潭大学金属材料热处理专业，学士学位 1983.7~1987.8 湖南涟源钢铁厂技术监督处，技术员 1987.9~1990.3 哈尔滨工业大学金属材料热处理专业，硕士学位 1990.9~1993.12 东北大学压力加工专业，博士学位 1994.1~1996.5 西北工业大学凝固技术国家重点实验室，博士后、副教授 1996.5~2000.6 石油大学（华东）机械学院，副教授、教授 2000.7~2007.7 中南大学材料科学与工程学院，教授、博士生导师 2007.8~2008.8 韩国材料科学研究所，客座研究员 2008.8~2011.8 中南大学材料科学与工程学院，教授、博士生导师 2011.9~现在中南大学材料科学与工程学院，二级教授、博士生导师

研究领域

（1）铝合金疲劳行为研究及其微结构控制；（2）铝合金微结构热稳定性研究以及新型耐热铝合金制备；（3）铝合金腐蚀机理及其控制技术（4）铝合金强韧化及其机理；（5）高强铝合金结构-热障功能一体化设计及制备技术；（6）镁合金时效强化及机理；（7）钢铁材料的晶粒超细化机理。

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

【1】 Song B , Xinlei Y , Zhiyi L , et al. The influence of preaging on the strength and precipitation behavior of a deformed Al-Cu-Mg-Ag alloy[J]. Journal of Alloys and Compounds, 2018:S092583881832156X. 【2】 Peng X , Zhiyi L , Wenting W , et al. Texture Effect on Fatigue Crack Propagation Behavior in Annealed Sheets of an Al-Cu-Mg Alloy[J]. Journal of Materials Engineering and Performance, 2018. 【3】 Lianghua L , Zhiyi L , Xiangnan H , et al. Effect of Overaging on Fatigue Crack Propagation and Stress Corrosion Cracking Behaviors of an Al-Zn-Mg-Cu Alloy Thick Plate[J]. Journal of Materials Engineering and Performance, 2018, 27(8):3824-3830. 【4】 Shasha L , Qi Z , Zhiyi L , et al. A Review of Texture Evolution Mechanisms During Deformation by Rolling in Aluminum?Alloys[J]. Journal of Materials Engineering and Performance, 2018. 【5】 Qi Z , Zhiyi L , Song B , et al. Coincidence site lattice boundary mechanism for the preferred growth of Goss and Cube grains during annealing in an Al-Cu-Mg alloy[J]. Materials Characterization, 2018, 141:193-211. 【6】 Xia P , Liu Z , Wu W , et al. Texture Evolution in an Al-Cu-Mg Alloy During Hot Rolling[J]. Journal of Materials Engineering and Performance, 2018. 【7】 Zhao Q , Liu Z , Li S , et al. Effect of S phase characteristics on the formation of recrystallization textures of an Al-Cu-Mg alloy[J]. Journal of Alloys & Compounds, 2018, 747. 【8】 Liu F , Liu Z , Liu M , et al. Analysis of empirical relation between microstructure, texture evolution and fatigue properties of an Al-Cu-Li alloy during different pre-deformation processes[J]. Materials Science & Engineering A, 2018, 726. 【9】 Chen L , Zeng D , Liu Z , et al. Improving the Fatigue Crack Propagation Resistance and Damage Tolerance of 2524-T3 Alloy with Amorphous Electroless Ni-P Coating[J]. Journal of Materials Engineering and Performance, 2018, 27(2):881-888. 【10】 Ying P , Liu Z , Bai S , et al. Effect of artificial aging on the Cu-Mg co-clustering and mechanical behavior in a pre-strained Al-Cu-Mg alloy[J]. Materials Science & Engineering A, 2017, 707. 【11】 Ying P , Liu Z , Bai S , et al. Effects of pre-strain on Cu-Mg co-clustering and mechanical behavior in a naturally aged Al-Cu-Mg alloy[J]. Materials Science and Engineering: A, 2017:S092150931730864X. 【12】 Huang T , Zhao Q , Liu Z , et al. Enhanced damage tolerance through reconstructing residual stress and Cu-Mg co-clusters by pre-rolling in an Al-Cu-Mg alloy[J]. Materials Science and Engineering: A, 2017, 700:241-249. 【13】 Wang A , Liu Z , Liu M , et al. Texture and Tempered Condition Combined Effects on Fatigue Behavior in an Al-Cu-Li Alloy[J]. Journal of Materials Engineering & Performance, 2017, 26(6):2453-2458. 【14】 Bai S , Ying P , Liu Z , et al. Quantitative transmission electron microscopy and atom probe tomography study of Ag-dependent precipitation of Ω phase in Al-Cu-Mg alloys[J]. Materials Science & Engineering A, 2017, 687:8-16. 【15】 Li F , Liu Z , Wu W , et al. Enhanced fatigue crack propagation resistance of Al-Cu-Mg alloy by intensifying Goss texture and refining Goss grains[J]. Materials Science & Engineering A, 2017, 679:204-214. 【16】 Zhou Y , Liu Z , Bai S , et al. Effect of Ag additions on the lengthening rate of Ω plates and formation of σ phase in Al-Cu-Mg alloys during thermal exposure[J]. Materials Characterization, 2017, 123:1-8. 【17】 Zhao Q , Liu Z , Li S , et al. Evolution of the Brass texture in an Al-Cu-Mg alloy during hot rolling[J]. Journal of Alloys & Compounds, 2017, 691:786-799. 【18】 Liu M , Liu Z , Bai S , et al. Analysis on the dissolution behavior of various size Cu-Mg co-clusters near a fatigue crack tip of underaged Al-Cu-Mg alloy during cyclic loading[J]. Journal of Alloys and Compounds, 2017, 699:119-125. 【19】 Li F , Liu Z , Wu W , et al. Slip band formation in plastic deformation zone at crack tip in fatigue stage II of 2xxx aluminum alloys[J]. International Journal of Fatigue, 2016:S0142112316301177. 【20】 Zhao Q , Liu Z , Huang T , et al. Enhanced fracture toughness in an annealed Al-Cu-Mg alloy by increasing Goss/Brass texture ratio[J]. Materials Characterization, 2016, 119:47-54.