李劲风 - 中南大学 - 材料科学与工程学院

个人简介

1993年7月毕业于中南工业大学材料科学与工程系金属材料与工程专业，获工学学士学位；1993年9月~1996年5月在长沙矿冶研究院攻读硕士研究生，获有色金属冶金专业工学硕士学位；1996年9月~2000年7月在中南大学材料科学与工程学院攻读博士研究生，获材料学专业工学博士学位；2001年9月~2003年6月在浙江大学化学系从事博士后研究，进行金属材料的腐蚀与防护研究。2009年7月~2010年7月公派至美国俄亥俄州立大学 (The Ohio State University)进行访问学者研究。

研究领域

（1）新型高性能铝锂合金成分设计(航空航天用新型高强高韧铝锂合金）；（2）铝合金及铝锂合金微合金化、微观组织与性能；（3）金属材料的腐蚀与防护；（4）新型2XXX系及7XXX系铝合金微观组织与性能。

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

[58] Li Jin-feng, Huang Jia-lei, Dan-yang Liu*, Chen Yong-lai, Zhang Xu-hu, Ma Peng-cheng. Distribution and evolution of aging precipitates in an Al-Cu-Li alloy with high Li concentration. Trans. Non-ferrous Met. Soc. China. 2019, 29(1): 15-24 [57] MA Yun-long(马云龙), LI Jin-feng(李劲风)*, LIU Dan-yang(刘丹阳), ZHENG Zi-qiao(郑子樵). Influence of small Indium (In) addition on microstructures and tensile properties of Al-Cu-1.0Li-(Mg) alloy. 稀有金属材料与工程英文版. 2009, 48(1): 1385-1392. [56] Liu Dan-yang, Wang Jie-xia, Li Jin-feng*. The microstructures evolution and mechanical properties disparity in 2070 Al-Li alloy with minor Sc addition. Trans. Nonferrous Met. Soc. China. 2018, 28(11): 2151-2161 [55] D.Y. Liu, J.F. Li*, Y.L. Ma, R.K. Gupta, N. Birbilis, R. Zhang*. A closer look at the role of Zn in the microstructure and corrosion of an Al-Cu-Li alloy. Corrosion Science. 2018, 45: 220-231 [54] 马云龙，林小红，刘丹阳，陆丁丁，李劲风*. 两种铝锂合金薄板析出相及动静态性能比较. 稀有金属. [53] 刘丹阳, 汪洁霞, 李劲风*, 陈永来, 张绪虎, 许秀芝, 郑子樵. Mg、Ag、Zn微合金化对T6态时效Al-Cu-Li系铝锂合金晶间腐蚀敏感性的影响.中国腐蚀与防护学报. 2018, 38(2): 183-190 [52] 汪洁霞, 刘晴, 李劲风*, 陈永来, 张绪虎, 许秀芝, 郑子樵. 时效处理对一种新型超高强Al-Cu-Li-X合金薄板的力学性能和微观组织的影响.中南大学学报(自然科学版).2018, 49(4):794-801 [51] Li Jin-feng, Huang Jia-lei, Dan-yang Liu*, Chen Yong-lai, Zhang Xu-hu, Ma Peng-cheng. Distribution and evolution of aging precipitates in an Al-Cu-Li alloy with high Li concentration. Trans. Non-ferrous Met. Soc. China. (accepted) [50] Jia-lei Huang,Jin-feng Li*, Dan-yang Liu, Rui-feng Zhang*, Yong-lai Chen, Xu-hu Zhang, Peng-cheng Ma, Rajeev Kumar Gupta, Nick Birbilis. Correlation of intergranular corrosion behaviour with microstructure in Al-Cu-Li alloy. Corrosion Science. 2018, 139: 215-226. 10.1016/j.corsci.2018.05.011 [49] 叶志豪, 朱瑞华, 李劲风*, 陈永来, 张绪虎.一种2050铝锂合金薄板的微观组织与力学性能.稀有金属材料与工程.2018, 47(4): 1192-1198 [48] Jin-feng Li*, Yong-lai Chen, Xu-hu Zhang, Zi-qiaoZheng. Mechanical Property and Structures of Friction-Stir Weld Joint of 2195-T8 Al-Li Alloy Plate.稀有金属材料与工程(英文版). 2018, 47(3): 780-787 [47] Zhi-hao Ye, Wen-xin Cai,Jin-feng Li*, Xiang-rong Chen, Rui-feng Zhang*, Nick Birbilis, Yong-lai Chen, Xu-hu Zhang, Peng-cheng Ma. Impact of annealing prior to solution treatment on aging precipitates and intergranular corrosion behavior of Al-Cu-Li alloy 2050. Metallurgical and Materials Transactions A. 2018, 49: 2471-2486. DOI: 10.1007/s11661-018-4596-1 [46] Peng Zhuo-wei,Li Jin-feng*, Sang Feng-jian, Chen Yong-lai, Zhang Xu-hu, Zheng Zi-qiao, Pan Qin-lin. Structures and tensile properties of Sc-containing 1445 Al-Li alloy sheet. Journal of Alloys and Compounds. 2018, 747: 471-483 [45] Rui-hua Zhu, Qing Liu, Jin-feng Li*, Yong-lai Chen, Xu-hu Zhang, Zi-qiao Zheng.Flow curve correction and processing map of 2050 Al-Li alloy. Trans. Nonferrous Met. Soc.China. 2018, 28(3): 404-414 [44] Jin-feng Li, Dan-yang Liu, Hong Ning, Cheng Liu, Peng-cheng Ma, Yong-lai Chen, Xu-hu Zhang,. Experimental quantification of “hardenability” of 2195 and 2050 Al-Li alloys by using cold-rolled sheets. Materials Characterization. 2018, 137: 180-188