刘和平 - 中北大学 - 材料科学与工程学院

个人简介

刘和平，男，中共党员，博士，讲师，硕士生导师。作为骨干成员参与国家、省部级、横向科研项目10余项，发表论文30余篇，其中SCI10篇。

研究领域

主要研究领域：固态相变，先进超高强度钢研发，金属材料表面处理，金属材料焊接，快速成型技术等。

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

[1] Heping Liu, Xianwen Lu, Xuejun Jin, Han Dong, Jie Shi, Enhanced mechanical properties of a hot stamped advanced high-strength steel treated by quenching and partitioning process, Scripta Materialia. 64 (2011) 749-752. [2] Heping Liu, Xuejun Jin, Han Dong, Jie Shi, Martensitic microstructural transformations from the hot stamping, quenching and partitioning process, Materials Characterization, 62 (2011) 223-227. [3] Heping Liu, Xianwen Lu, Xuejun Jin, Phase transformation and mechanical properties in laser continuous heat treatment welds, Materials & Design, 32 (2011) 2269-2276. [4] Heping Liu, Xuejun Jin, Secondary austenite morphologies in fusion zone of welded joint after postweld heat treatment with a continuous wave laser, Journal of Materials Sciences and Technology, 28(3),2012, 249-254 . [5] Heping Liu, Xuejun Jin, Electrochemical corrosion behavior of the laser continuous heat treatment welded joint, Journal of Wuhan University of Technology-Materials Science Edition, 26(2011), 1140-1147. [6] Heping Liu, Xuejun Jin, Hongmei Song, Zhuguo Li, Jiaming Ni, Pitting corrosion behavior in laser weld metals of 2205 DSS with continuous heat treatment, Advanced Materials research, (Volumes 97-101), (2010), 3884-3888. [7] Heping Liu, High strength, high elongation steels obtained by hot deformation and quenching and partitioning, International Heat Treatment & Surface Engineering, 7 (2013) 54-55. [8] Xianwen Lu, Heping Liu, Xuejun Jin, Preliminary study on kinetics of carbon partitioning in a high Ni Q&P steel, Journal of Alloys and Compounds, 2013, Volume 577, Supplement 1, Pages S72–S75 . [9] Mingming Chen, Riming Wu, Heping Liu, Li Wang, Jie Shi, Han Dong, XueJun Jin, An ultrahigh strength steel produced through deformation-induced ferrite transformation and Q&P process, Science China Technological Sciences, 55(2012), 1827-1832. [10] Heping Liu, Bin Liu , Dazhao Li, Huer Sun，Fenger Sun，Xuejun Jin, Yongtao Zhang, Hot deformation behavior of low carbon steel during compression at elevated temperature. Journal of Wuhan University of Technology-Materials Science Edition, 2013, in press. [11] Heping Liu, Bin Liu, Dazhao Li, Huer Sun, Fenger Sun, Xuejun Jin, Yongtao Zhang, Microstructural characterization of welded joint in duplex stainless steel by laser continuous heat treatment, Journal of Iron and Steel Research, International, 2014, in press. [12] Heping Liu, Huer Sun, Fenger Sun, Xishu Wang, Yongtao Zhang, Analysis of χ phase precipitation in aged 2205 duplex stainless steel, Journal of Wuhan University of Technology-Materials Science Edition, 2014, in press.