当前位置: X-MOL首页全球导师 国内导师 › 利成宁

个人简介

教育背景: 2010-2017 东北大学材料加工工程专业硕博 2006-2010 东北大学材料加工工程专业学士 工作经历: 2020.6-至今 天津大学材料科学与工程学院 副教授 2017.7-2020.5 天津大学材料科学与工程学院 讲师 代表性科研项目: 国家自然科学基金项目:低碳含铜超高强钢可控相变焊接接头氢扩散及抗氢脆机理研究,执行年限:2023.01-2026.12,负责人 中国焊接学会创新平台项目:异种金属焊接接头梯度过渡区调控技术及原理样机(电弧增材制造),执行年限:2021.11-2024.11,负责人 中国博士后科学基金项目:吉帕级织构增韧纳米相强化钢组织稳定性及HAZ强韧机制,执行年限:2019.08-2022.07,负责人 国家自然科学基金项目:高强钢HAZ纳米复合析出相多阶段演化行为及其对强韧性的影响,执行年限:2019.01-2021.12,负责人 天津市自然科学基金项目:晶体学织构对新型易焊高韧超高强钢焊接热影响区组织热稳定性及强韧性的影响,执行年限:2019.04-2022.03,负责人 国家重点研发计划项目:复杂构件多电弧熔丝控氧增材制造技术;执行年限:2018.01-2023.12,参与人 产学研合作项目:焊接材料对焊接结构性能影响及适配高钢级管道焊材研发,执行年限:2022.06-2026.06,负责人 产学研合作项目:LNG低温高锰钢气体保护焊焊丝及焊接工艺开发,执行年限:2021.11-2023.12,负责人 产学研合作项目:特殊用途超高强钢高效焊接应用研究,2021.01-2023.12,负责人 产学研合作项目:核电用690镍基合金焊丝热裂敏感性分析,2021.01-2021.12,负责人 讲授课程: 本科生核心课:《金属材料焊接》 研究生核心课:《焊接冶金动力学及组织转变》

研究领域

1)焊接冶金及高效焊材 2)抗氢脆材料及焊接 3)先进金属材料组织性能调控 4)电弧增材制造

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

Effect of microalloying with Nb and/or V on the microstructure and mechanical properties of GPa grade deposited metals Welding in the World 2023-09 | Journal article DOI: 10.1007/s40194-023-01531-5 CONTRIBUTORS: Jiamei Wang; Chengning Li; Dongpo Wang; Xinjie Di The co-precipitation evolution of NiAl and Cu nanoparticles and its influence on strengthening and toughening mechanisms in low-carbon ultra-high strength martensite seamless tube steel International Journal of Plasticity 2023-07 | Journal article DOI: 10.1016/j.ijplas.2023.103654 CONTRIBUTORS: Xiaocong Yang; Xinjie Di; Jingsong Wang; Chao Fang; Wen Fu; Lingzhi Ba; Xiaofeng Zhou; Chuanyou Zhang; Chengning Li Effect of precipitation evolution of NiAl and Cu nanoparticles on strengthening mechanism of low carbon ultra-high strength seamless tube steel Materials Science and Engineering: A 2023-05 | Journal article DOI: 10.1016/j.msea.2023.144939 CONTRIBUTORS: Xiaocong Yang; Xinjie Di; Qiyue Duan; Wen Fu; Lingzhi Ba; Chengning Li Enhancing hot ductility of a cryogenic high manganese steel at a high strain rate by matrix homogenization Materials Science and Engineering: A 2023-05 | Journal article DOI: 10.1016/j.msea.2023.145002 CONTRIBUTORS: Lingzhi Ba; Xinjie Di; Chengning Li; Jin Pan; Cheng Ma; Yongtao Qu; Xiaocong Yang; Wenbin Hu Transition Strategy Optimization of Inconel625-HSLA Steel Functionally Graded Material Fabricated by Wire Arc Additive Manufacturing Metals and Materials International 2023-03 | Journal article DOI: 10.1007/s12540-022-01247-z CONTRIBUTORS: Jiarong Zhang; Chengning Li; Lingzhi Ba; Xinjie Di Effect of Quenching-and-Tempering Heat Treatment on Mechanical Properties and Heat-Affected Zone Softening Behavior of Ultra-High Strength Steel Journal of Materials Engineering and Performance 2023-02-27 | Journal article DOI: 10.1007/s11665-023-07993-4 CONTRIBUTORS: Xingping Zhang; Chengning Li; Xiaocong Yang; Xinjie Di Effect of post-heat treatment on microstructure and properties of EH47 steel CGHAZ Materials Science and Technology 2023-01-22 | Journal article DOI: 10.1080/02670836.2022.2106394 CONTRIBUTORS: Xiaocong Yang; Xinjie Di; Lingzhi Ba; Jiarong Zhang; Chengning Li Effect of Electromagnetic Stirring Frequency on Inconel625-High Strength Low Alloy Steel Functionally Graded Material Fabricated by Wire Arc Additive Manufacturing Journal of Materials Engineering and Performance 2022-12 | Journal article DOI: 10.1007/s11665-022-07008-8 CONTRIBUTORS: Jiarong Zhang; Xinjie Di; Chengning Li; Lingzhi Ba; Xing Jiang Effect of Microstructural Evolution on the Mechanical Properties of Intercritical Heat‐Affected Zone of Quenched‐and‐Tempered Ultrahigh‐Strength Steel steel research international 2022-08 | Journal article DOI: 10.1002/srin.202100776 CONTRIBUTORS: Xingping Zhang; Xinjie Di; Wen Jing; Xiaofeng Zhou; Chuanyou Zhang; Chengning Li Combined effects of welding heat input and peak temperature on precipitation and mechanical properties of the HAZ for modified austenitic medium manganese steels Materials Research Express 2021-10-01 | Journal article DOI: 10.1088/2053-1591/ac2a60 CONTRIBUTORS: Wenjin Sun; Miao Li; Chengning Li; Wenbin Hu; Xinjie Di Effect of austenite transformation degree on microstructure and fracture toughness of high-strain pipeline steel Journal of Materials Science 2021-08-18 | Journal article DOI: 10.1007/s10853-021-06149-w CONTRIBUTORS: Shanshan Gao; Xinjie Di; Chengning Li; Weiwei Li; Lingkang Ji Improvement in corrosion resistance of wire arc additive manufactured Inconel 625 alloy through heat treatment Materials Research Express 2021-06-01 | Journal article DOI: 10.1088/2053-1591/ac0b0b CONTRIBUTORS: Xipeng Zhao; Xinjie Di; Xi Zhang; Chengning Li EBSD analysis of microstructures and mechanical properties of softened zones in X60 reeled-pipeline welded joint after cyclic plastic deformation Welding in the World 2020-07-12 | Journal article DOI: 10.1007/s40194-020-00916-0 CONTRIBUTORS: Yuanbo Jiang; Chengning Li; Xinjie Di; Dongpo Wang; Jiangcheng Liu Effect of restraint stress on martensite transformation in low transformation temperature weld metal Journal of Materials Science 2020-02-23 | Journal article DOI: 10.1007/s10853-019-04049-8 CONTRIBUTORS: Zhijin Zhou; Xinjie Di; Chengning Li; Shipin Wu Effect of dilution on fatigue behaviour of welded joints produced by low-transformation-temperature fillers Science and Technology of Welding and Joining 2019-10-03 | Journal article DOI: 10.1080/13621718.2019.1576272 CONTRIBUTORS: Shipin Wu; Dongpo Wang; Zhi Zhang; Chengning Li; Xiuguo Liu; Zhijin Zhou; Xinjie Di

学术兼职

中国焊接学会金属焊接性及焊接材料委秘书长 中国焊接学会青委会委员 《Materials》期刊(SCI IF 3.748)客座编辑

推荐链接
down
wechat
bug