个人简介
2011.11至今，山东大学材料学院，副教授
2009.10---2011.10，美国UniversityofCalifornia,Davis，访问学者
2006.07---2009.09，山东大学材料学院，讲师，副教授
2004.07---2006.06，北京航空航天大学材料学院，博士后
2000.07---2004.06，中国科学院金属研究所，博士研究生
1997.07---2000.06，山东建筑工程学院，助教，讲师
1990.07---1997.06，山东工业大学材料学院，本科，硕士
研究领域
研究方向：纳米金属材料、金属基复合材料和粉末冶金，主要包括：(1)多级结构纳米金属材料和金属基复合材料的制备、分析和表征；(2)利用快速凝固技术制备金属粉体及其应用；(3)材料加工过程计算机模拟与仿真。
近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
(1)Liu DM, Wen HM, Zhang DL, Wang CX,Lin YJ, Xiong YH, et al. Stress-enhanced grain growth in a nanostructuredaluminium alloy during spark plasma sintering. Philosophical Magazine Letters2014; 94:741-8. (SCI/EI)
(2)Dongming Liu, Yuhong Xiong, Troy D. Topping,Yizhang Zhou, Chris Haines, Joseph Paras, Darold Martin, Deepak Kapoor, JulieM. Schoenung, Enrique J. Lavernia. Spark Plasma Sintering ofNanostructured Aluminum: Influence of Tooling Material on Microstructure. Metall. Mater. Trans. A, 2013;44(4)A:1908-16. (SCI/EI)
(3)Dongming Liu, Yuhong Xiong, Troy D.Topping, Yizhang Zhou, Chris Haines, Joseph Paras, Darold Martin, DeepakKapoor, Julie M. Schoenung, Enrique J. Lavernia. Spark Plasma Sinteringof Cryomilled Nanocrystalline Al Alloy II: Influence of Processing Conditionson Densification and Properties. Metall. Mater. Trans. A, 2012, 43(1): 340-350. (SCI/EI)
(4)Yuhong Xiong, Dongming Liu, Troy D. Topping, YizhangZhou, Chris Haines, Joseph Paras, Darold Martin, Deepak Kapoor, Julie M.Schoenung, Enrique J. Lavernia. Spark Plasma Sintering of CryomilledNanocrystalline Al Alloy I: Microstructure Evolution. Metall. Mater.Trans. A, 2012, 43(1): 327-339. (SCI/EI)
(5)Dong-Ming Liu, Jiu-Zhou Zhao, MusenLi. Modeling and Experimental Verification of the Tubular Product Formationduring Spray Forming. Transactions of Nonferrous Metals Society of China.2009, 19(3): 661-667. (SCI/EI)
(6)刘东明，赵九洲.喷射成形管坯形状演变过程模拟.材料科学与工艺.2010, 18(6): 767-771. (EI)
(7)刘东明董盈王凯赵九洲.喷射成形Al-Zn合金凝固过程模拟I---单个液滴凝固行为.特种铸造及有色合金,2008, 28(9): 657-659
(8)刘东明董盈王凯赵九洲.喷射成形Al-Zn合金凝固过程模拟II---雾化锥凝固行为.特种铸造及有色合金,2008, 28(10): 746-748
(9)Zheng P, Sha JB, Liu DM, Gong SK, Xu HB. Effect of Hfon high-temperature strength and room-temperature ductility of Nb-15W-0.5Si-2Balloy. Materials Science and Engineering A, 2008;483-84:656-659. (SCI/EI)
(10)郑鹏,沙江波,刘东明,徐惠彬.Hf对Nb-15W-5Si-2B合金室温和高温力学性能的影响.航空学报，2008,29(1): 227-232 (EI)
(11)边洁,张晨,刘东明.FEP/PPS共混涂层微观结构及其与钢基体的结合强度.金属热处理,2008, 29(1): 227-232
(12)Liu Dong-ming, Jiang Rong-li, SHAJiang-bo, Xu Huibin. Microstructure and high-temperature mechanical propertiesof Nb-silicide based in-situ composites. Transactions of Nonferrous MetalsSociety of China. 2006, 16(S3):2022-2025 (SCI)
(13)Jiang Rong-li, Liu Dong-ming, SHA Jiang-bo, MA Yue.High-temperature oxidation behavior of Nb67-xW15Si18Hfx(x=0, 5 and 10) alloys. Transactionsof Nonferrous Metals Society of China. 2006, V16(S3):2009-2012 (SCI)
(14)Zheng Peng, Sha Jiang-bo, Liu Dong-ming，GONGSheng-kai, XU Hui-bin. Effect of Si content on mechanical properties of Nb-Sibased alloys with a NbSS/ Nb5Si3 structure at room temperature and higher .Transactions of Nonferrous Metals Society of China. 2006,V16(S3):2030-2033
(15)Dong-Ming Liu, Jiu-Zhou Zhao,Heng-Qiang Ye. Modeling of the solidification of gas-atomized alloy dropletsduring spray forming. Material Science and Engineering A, 2004; 372(1-2):229-234 (SCI/EI)
(16)刘东明，赵九洲，叶恒强.喷射成形圆柱坯的计算机模拟与工艺设计.金属学报，2004;40(8): 873-881 (SCI/EI)
(17)Jiu-Zhou Zhao, Dong-Ming Liu, Heng-Qiang Ye. Modelingand Simulation of the Microstructure Evolution of the Gas-atomized AlloyDroplets during Spray Forming. Journal of Materials Science and Technology,2003; 19(5):398-402 (SCI/EI)
(18)王晓峰，赵九洲，刘东明，王江涛，陈桂云.喷射成形在金属基复合材料制备中的应用.特种铸造及有色合金,2005年第6期:350-353 (EI)
(19)赵九洲，刘东明，王江涛，叶恒强.喷射成形过程模拟及应用.特种铸造及有色合金,2004年第4期:1-3
(20)刘东明，赵九洲，叶恒强.喷射成形中金属液滴凝固过程的计算机模拟.金属学报，2003;39(4):375-380 (SCI/EI)
(21)刘东明，赵九洲，叶恒强.Al-Cu合金快速凝固过程的计算机模拟.2002年材料科学与工程新进展(下).冶金工业出版社，北京，2003:1980-1984
京公网安备 11010802027423号