Langston, Paul - University of Nottingham - Department of Chemical and Environmental Engineering

个人简介

Paul Langston is a lecturer in chemical engineering at the University of Nottingham, UK. He holds a PhD in Chemical Engineering from the University of Surrey.

研究领域

His main areas of work are in computer simulation of particle and fluid flow, steady-state & dynamic process flow sheet simulations, crowd dynamics, monte-carlo models and applications of Bayes' theorem in engineering systems.

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

MATCHETT, A. J., LANGSTON, P. A. and MCGLINCHEY, D., 2016. A "principal stress cap" model for stresses in a circular silo with an off-centre circular core: Finite core models, including filled silos, incipient flow and switch stresses: Chemical Engineering Research and Design Chemical Engineering Research and Design. 106, 263-282 AGUNLEJIKA, E. O., LANGSTON, P., AZZOPARDI, B. J. and HEWAKANDAMBY, B. N., 2016. Flow instabilities in a horizontal thermosyphon reboiler loop: Experimental Thermal and Fluid Science Experimental Thermal and Fluid Science. 78, 90-99 AGUNLEJIKA, E. O., LANGSTON, P. A., AZZOPARDI, B. J. and HEWAKANDAMBY, B. N., 2016. Subatmospheric boiling study of the operation of a horizontal thermosyphon reboiler loop: Instability: Applied Thermal Engineering Applied Thermal Engineering. 109, 739-745 ROULLIER, B. D., LANGSTON, P. A. and LI, X. L., 2016. Modelling the environmental impact of underground coal gasification LANGSTON, P., KENNEDY, A. R. and CONSTANTIN, H., 2015. Discrete element modelling of flexible fibre packing: Computational Materials Science Computational Materials Science. 96(PA), 108-116 MATCHETT, A. J., LANGSTON, P. A. and MCGLINCHEY, D., 2015. A model for stresses in a circular silo with an off-centre circular core, using the concept of a principal stress cap: Solution for a completely filled silo and comparison with Janssen and DEM data: Chemical Engineering Research and Design Chemical Engineering Research and Design. 93, 330-348 C. JIN, P. A. LANGSTON, G. E. PAVLOVSKAYA and S. P. RIGBY, 2015. Insights into flow elds confined to three-dimensional random porous media HABIB, M; HABIB, U; AHMED, J; MOHABUTH, NB; LANGSTON, P; MILES, NJ; HALL, P, 2014. Discrete Element Modeling (DEM) of the Vertically Vibrated Particle Bed PARTICULATE SCIENCE AND TECHNOLOGY. 32(3), 257-273 LANGSTON, P. and KENNEDY, A. R., 2014. Discrete element modelling of the packing of spheres and its application to the structure of porous metals made by infiltration of packed beds of NaCl beads: Powder Technology Powder Technology. 268(1), 210-218 AI J., LANGSTON P.A., YU H.-S., 2013. Discrete element modelling of material non-coaxiality in simple shear flows International Journal for Numerical and Analytical Methods in Geomechanics. 38(6), 615–635 LANGSTON P., AI J., YU H.-S., 2013. Simple shear in 3D DEM polyhedral particles and in a simplified 2D continuum model Granular Matter. 15(5), 595-606 FRAIGE F.Y., AL-KHATIB L.A., ALNAWAFLEH H.M., DWEIRJ M.K., LANGSTON P.A., 2012. Waste electric and electronic equipment in Jordan: willingness and generation rates Journal of Environmental Planning and Management. 55(2), WANG, J., YU, H.S., LANGSTON, P. and FRAIGE, F., 2011. Particle shape effects in discrete element modelling of cohesive angular particles Granular Matter. 13(1), 1-12 WHITAKER, MA, LANGSTON, P, NAYLOR, A, AZZOPARDI, BJ and HOWDLE, SM, 2011. Particle Size And Shape Effects In Medical Syringe Needles: Experiments And Simulations For Polymer Microparticle Injection Journal Of Materials Science-Materials In Medicine. 22(8), 1975-1983 MACK, S, LANGSTON, P, WEBB, C and YORK, T, 2011. Experimental Validation Of Polyhedral Discrete Element Model Powder Technology. 214(3), 431-442 I. D′IAZ, P. LANGSTON, G. OVEJERO, M.D. ROMERO, E. D′IEZ, 2010. Purification process design in the production of styrene monomer Chemical Engineering and Processing. 49, 367–375 KOVALCHUK, N, STAROV, V and LANGSTON, P. HILAL, N., 2009. Formation of stable clusters in colloidal suspensions Advances in Colloid and interface Science. 148, 144-154 DRURY, J., COCKING, C., REICHER, S., BURTON, A., SCHOFIELD, D., HARDWICK, A., GRAHAM, D. and LANGSTON, P., 2009. Cooperation versus competition in a mass emergency evacuation: A new laboratory simulation and a new theoretical model. VOL 41(NUMB 3), 957-970 LANGSTON, P.A., MATCHETT, A.J., FRAIGE, F.Y. and DODDS, J., 2009. Vibration induced flow in hoppers: continuum and DEM model approaches Granular Matter. 11(2), 99-113 ALASTAIR SMITH, CHRISTOPHER JAMES, RICHARD JONES, PAUL LANGSTON, EDWARD LESTER, JOHN DRURY, 2009. Modelling Contra-flow in Crowd Dynamics DEM Simulation Safety Science. 47, 395–404 DíEZ, E., LANGSTON, P., OVEJERO, G. and ROMERO, M.D., 2009. Economic feasibility of heat pumps in distillation to reduce energy use Applied Thermal Engineering. 29(5-6), 1216–1223 SINGH, H., ARTER, R., DODD, L., LANGSTON, P., LESTER, E. and DRURY, J., 2009. Modelling subgroup behaviour in crowd dynamics DEM simulation. VOL 33(NUMBER 12), 4408-4423 KOVALCHUK, N., STAROV, V., LANGSTON, P. and HILAL, N., 2009. Reversible coagulation of colloidal suspension in shallow potential wells: Direct numerical simulation. VOL 71(NUMBER 4), 503-513 KOVALCHUK, N., STAROV, V., LANGSTON, P., HILAL, N. and ZHDANOV, V., 2008. Colloidal dynamics: Influence of diffusion, inertia and colloidal forces on cluster formation Journal of Colloid and Interface Science. 325, 377-385 FRAIGE, F.Y., LANGSTON, P.A. and CHEN, G.Z., 2008. Distinct element modelling of cubic particle packing and flow Powder Technology. 186(3), 224-240