Lowndes, Ian - University of Nottingham - Department of Chemical and Environmental Engineering

研究领域

Ian is interested in the development and application of computational models to provide an improved understanding of the fundamental processes that cause real world environmental engineering problems, and which may assist in the design of sustainable solutions to these problems. The focus of some of his current and recent research studies is the modelling of the emission, dispersion and mitigation of fugitive dust from surface minerals extraction and processing operations. Ian also has research interests in the development of computational fluid dynamic models to characterise the environmental fluid flow phenomena exhibited by shallow water lakes and volcanic eruptions.

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

N K MOHALIK, E LESTER and I S LOWNDES, 2016. Review of experimental methods to determine spontaneous combustion susceptibility of coal - Indian context International Journal of Mining, Reclamation and Environment. ABDULKADIR, M., HERNANDEZ-PEREZ, V., LOWNDES, I. S., AZZOPARDI, B. J. and SAM-MBOMAH, E., 2016. Experimental study of the hydrodynamic behaviour of slug flow in a horizontal pipe: Chemical Engineering Science Chemical Engineering Science. 156, 147-161 N H MOHALIK, E LESTER, I S LOWNDES and V K SINGH, 2016. Estimation of greenhouse gas emissions from spontaneous combustion/fire of coal in opencast mines - Indian Context Carbon Management. 1-16 ABDULKADIR, M., HERNANDEZ-PEREZ, V., LO, S., LOWNDES, I. S. and AZZOPARDI, B. J., 2015. Comparison of experimental and Computational Fluid Dynamics (CFD) studies of slug flow in a vertical riser: Experimental Thermal and Fluid Science Experimental Thermal and Fluid Science. 68, 468-483 BAIN, O., BILLINGHAM, J., HOUSTON, P. and LOWNDES, I., 2015. Flows of granular material in two-dimensional channels: Journal of Engineering Mathematics Journal of Engineering Mathematics. ABDULKADIR M., AZZI A., ZHAO D., LOWNDES I.S., AZZOPARDI B.J., 2014. Liquid film thickness behaviour within a large diameter vertical 180° return bend Chemical Engineering Science. 107, 137–148 ABDULKADIR M., HERNANDEZ-PEREZ V., LOWNDES I.S., AZZOPARDI B.J., DZOMEKU S., 2014. Experimental study of the hydrodynamic behaviour of slug flow in a vertical riser Chemical Engineering Science. 106, 60–75 ACUNA, EI, LOWNDES, IS, 2014. A Review of Primary Mine Ventilation System Optimization INTERFACES. 44(2), 163-175 LI H, MCDOWELL G and LOWNDES I S, 2014. Discrete-element modelling of rock communition in a cone crusher using a bonded particle model Geotechnique Letters. 4(2), 79 –82 PIRAS L, DENTONI V, MASCARRI G and LOWNDES I S, 2014. Dust dispersion from haul roads in complex terrain: the case of a mineral reclamation site located in Sardinia (Italy) International Journal of Mining, Reclamation and Environment. 28(5), 323-341 LI, H, MCDOWELL, G, LOWNDES, I, 2014. Discrete element modelling of a rock cone crusher Powder Technology. 263, 151-158 LI, HQ ; MCDOWELL, G ; LOWNDES, I, 2014. Discrete element modelling of a rock cone crusher POWDER TECHNOLOGY. 263, 151-158 LI, H., MCDOWELL, G. and LOWNDES, I., 2014. Discrete-element modelling of rock communition in a cone crusher using a bonded particle model: Geotechnique Letters Geotechnique Letters. 4(April-June), 79-82 LI H, MCDOWELL G R and LOWNDES I S, 2013. Discrete-element modelling of rock breakage using dense random packing Geotechnique Letters. 3, 98-102 ABDULKADIR M, HERNADEZ-PEREZ V, LO S and LOWNDES I S, 2013. Comparrison of Experimental and Computational Fluid Dynamics (CFD) Studies of slug flow in a vertical 90 degree Bend Journal of Computational Multiphase Flows. 5(4), 265-281 M ADULKADIR, D ZHAO, A AZZI, I S LOWNDES and B J AZZOPARDI, 2012. Two-phase air-water flow through a large diameter vertical 180 degree return bend Chemical Engineering Science. 79, 138-152 H LI, G R MCDOWELL and I S LOWNDES, 2012. A laboratory investigation and discrete element modeling of rock flow in a chute Powder Technology. 229, 199-205 SAMAD A, OMAR R, HEWAKANDAMBY B and LOWNDES I S, 2012. Swirl induced flow through a venturi ejector In: ASME 2012 Fluids Engineering Division Summer Meeting. 2. 65-70 MCDOWELL, G., LI, H. and LOWNDES, I., 2011. The importance of particle shape in discrete-element modelling of particle flow in a chute Geotechnique Letters. 1, 59-64 ABDULKADIR, M., ZHAO, D., SHARAF, S., ABDULKAREEM, L., LOWNDES, I.S. and AZZOPARDI, B.J., 2011. Interrogating the effect of 90° bends on air-silicone oil flows using advanced instrumentation Chemical Engineering Science. 66(11), 2453-2467 FOKEER, S., LOWNDES, I.S. and HARGREAVES, D.M., 2010. Numerical modelling of swirl flow induced by a three-lobed helical pipe Chemical Engineering and Processing: Process Intensification. 49(5), 536-546 RUILIN, Z. and LOWNDES, I.S., 2010. The application of a coupled artificial neural network and fault tree analysis model to predict coal and gas outbursts International Journal of Coal Geology. 84(2), 141-152 ABDULKADIR, M., ZHAO, D., SHARAF, S., ABDULKAREEM, L., LOWNDES, I.S. and AZZOPARDI, B.J., 2010. Experimental investigation of phase distributions of two-phase air-silicone oil flow in a vertical pipe Proceedings of the World Academy of Science, Engineering and Technology. 61, 52-59 ACUNA E I and LOWNDES I S, 2010. An estimation of the benefits of main ventilation system optimisation using free splitting networks In: Deep Mining 2010, Santiago, Chile. 513-519