近期论文

查看导师新发文章 （温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

AREMU, A., ASHCROFT, I., WILDMAN, R. and HAGUE, R., 2017. Non-linear contact analysis of self-supporting lattice AREMU, A. O., BRENNAN-CRADDOCK, J. P. J., PANESAR, A., ASHCROFT, I. A., HAGUE, R. J. M., WILDMAN, R. D. and TUCK, C., 2017. A voxel-based method of constructing and skinning conformal and functionally graded lattice structures suitable for additive manufacturing: Additive Manufacturing Additive Manufacturing. 13, 1-13 CHEN, X., ASHCROFT, I. A., WILDMAN, R. D. and TUCK, C. J., 2017. A combined inverse finite element – elastoplastic modelling method to simulate the size-effect in nanoindentation and characterise materials from the nano to micro-scale: International Journal of Solids and Structures International Journal of Solids and Structures. 104-105, 25-34 SALEH, E., WOOLLIAMS, P., CLARKE, B., GREGORY, A., GREEDY, S., SMARTT, C., WILDMAN, R., ASHCROFT, I., HAGUE, R., DICKENS, P. and TUCK, C., 2017. 3D inkjet-printed UV-curable inks for multi-functional electromagnetic applications: Additive Manufacturing Additive Manufacturing. 13, 143-148 KHAN, M. F., BRACKETT, D., ASHCROFT, I., TUCK, C. and WILDMAN, R., 2017. A novel approach to design lesion-specific stents for minimum recoil: Journal of Medical Devices, Transactions of the ASME Journal of Medical Devices, Transactions of the ASME. 11(1), AREMU, A. O., MASKERY, I. A., TUCK, C. J., ASHCROFT, I. A., WILDMAN, R. D. and HAGUE, R. J. M., 2016. Effects of net and solid skins on self-supporting lattice structures HE, Y. F., WILDMAN, R. D., TUCK, C. J., CHRISTIE, S. D. R. and EDMONDSON, S., 2016. An Investigation of the Behavior of Solvent based Polycaprolactone ink for Material Jetting: Scientific Reports Scientific Reports. 6, ZHANG, F., TUCK, C., HAGUE, R., HE, Y. F., SALEH, E., LI, Y., STURGESS, C. and WILDMAN, R., 2016. Inkjet printing of polyimide insulators for the 3D printing of dielectric materials for microelectronic applications: Journal of Applied Polymer Science Journal of Applied Polymer Science. 133(18), BAUMERS, M., TUCK, C., WILDMAN, R., ASHCROFT, I. and HAGUE, R., 2016. Shape Complexity and Process Energy Consumption in Electron Beam Melting: A Case of Something for Nothing in Additive Manufacturing?: Journal of Industrial Ecology Journal of Industrial Ecology. VAFAEI, S., TUCK, C., ASHCROFT, I. and WILDMAN, R., 2016. Surface microstructuring to modify wettability for 3D printing of nano-filled inks: Chemical Engineering Research and Design Chemical Engineering Research and Design. 109, 414-420 MASKERY, I., ABOULKHAIR, N. T., CORFIELD, M. R., TUCK, C., CLARE, A. T., LEACH, R. K., WILDMAN, R. D., ASHCROFT, I. A. and HAGUE, R. J. M., 2016. Quantification and characterisation of porosity in selectively laser melted Al-Si10-Mg using X-ray computed tomography: Materials Characterization Materials Characterization. 111, 193-204 HART, L. R., LI, S., STURGESS, C., WILDMAN, R., JONES, J. R. and HAYES, W., 2016. 3D Printing of Biocompatible Supramolecular Polymers and their Composites: ACS Applied Materials and Interfaces 8(5), 3115-3122 BADIEE, A., ASHCROFT, I. A. and WILDMAN, R. D., 2016. The thermo-mechanical degradation of ethylene vinyl acetate used as a solar panel adhesive and encapsulant: International Journal of Adhesion and Adhesives International Journal of Adhesion and Adhesives. 68, 212-218 VAFAEI, S., TUCK, C., WILDMAN, R. and ASHCROFT, I., 2016. Spreading of the nanofluid triple line in ink jet printed electronics tracks: Additive Manufacturing Additive Manufacturing. 11, 77-84 HE, Y., TUCK, C. J., PRINA, E., KILSBY, S., CHRISTIE, S. D., EDMONDSON, S., HAGUE, R. J. M., ROSE, F. R. A. J. and WILDMAN, R. D., 2016. A new photocrosslinkable polycaprolactone-based ink for three-dimensional inkjet printing: Journal of Biomedical Materials Research - Part B Applied Biomaterials Journal of Biomedical Materials Research - Part B Applied Biomaterials. PARRY, L., ASHCROFT, I. A. and WILDMAN, R. D., 2016. Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation: Additive Manufacturing Additive Manufacturing. 12, 1-15 MASKERY, I., ABOULKHAIR, N. T., AREMU, A. O., TUCK, C. J., ASHCROFT, I. A., WILDMAN, R. D. and HAGUE, R. J. M., 2016. A mechanical property evaluation of graded density Al-Si10-Mg lattice structures manufactured by selective laser melting: Materials Science and Engineering A Materials Science and Engineering A. 670, 264-274 GUNASEKERA, D. H. A. T., KUEK, S., HASANAJ, D., HE, Y., TUCK, C., CROFT, A. K. and WILDMAN, R. D., 2016. Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents Faraday Discussions. 190, 509-523 BONGS, K., BOYER, V., CRUISE, M. A., FREISE, A., HOLYNSKI, M., HUGHES, J., KAUSHIK, A., LIEN, Y. H., NIGGEBAUM, A., PEREA-ORTIZ, M., PETROV, P., PLANT, S., SINGH, Y., STABRAWA, A., PAUL, D. J., SOREL, M., CUMMING, D. R. S., MARSH, J. H., BOWTELL, R. W., BASON, M. G., BEARDSLEY, R. P., CAMPION, R. P., BROOKES, M. J., FERNHOLZ, T., FROMHOLD, T. M., HACKERMULLER, L., KRüGER, P., LI, X., MACLEAN, J. O., MELLOR, C. J., NOVIKOV, S. V., ORUCEVIC, F., RUSHFORTH, A. W., WELCH, N., BENSON, T. M., WILDMAN, R. D., FREEGARDE, T., HIMSWORTH, M., RUOSTEKOSKI, J., SMITH, P., TROPPER, A., GRIFFIN, P. F., ARNOLD, A. S., RIIS, E., HASTIE, J. E., PABOEUF, D., PARROTTA, D. C., GARRAWAY, B. M., PASQUAZI, A., PECCIANTI, M., HENSINGER, W., POTTER, E., NIZAMANI, A. H., BOSTOCK, H., RODRIGUEZ BLANCO, A., SINUCO-LEON, G., HILL, I. R., WILLIAMS, R. A., GILL, P., HEMPLER, N., MALCOLM, G. P. A., CROSS, T., KOCK, B. O., MADDOX, S. and JOHN, P., 2016. The UK National Quantum Technologies Hub in sensors and metrology (Keynote Paper) BEGINES, B., HOOK, A. L., ALEXANDER, M. R., TUCK, C. J. and WILDMAN, R. D., 2016. Development, printability and post-curing studies of formulations of materials resistant to microbial attachment for use in inkjet based 3D printing: Rapid Prototyping Journal Rapid Prototyping Journal. 22(5), 835-841 LIU, Y., HU, Q., ZHANG, F., TUCK, C., IRVINE, D., HAGUE, R., HE, Y., SIMONELLI, M., RANCE, G. A., SMITH, E. F. and WILDMAN, R. D., 2016. Additive manufacture of three dimensional nanocomposite based objects through multiphoton fabrication: Polymers Polymers. 8(9), SIMONELLI, M., TUCK, C., ABOULKHAIR, N. T., MASKERY, I., ASHCROFT, I., WILDMAN, R. D. and HAGUE, R., 2015. A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. MASKERY, I., AREMU, A. O., SIMONELLI, M., TUCK, C., WILDMAN, R. D., ASHCROFT, I. A. and HAGUE, R. J. M., 2015. Mechanical Properties of Ti-6Al-4V Selectively Laser Melted Parts with Body-Centred-Cubic Lattices of Varying cell size: Experimental Mechanics Experimental Mechanics. SIMONELLI, M., ABOULKHAIR, N., MASKERY, I., TUCK, C., ASHCROFT, I., EVERITT, N., WILDMAN, R. and HAGUE, R., 2015. Aspects of the process and material relationships in the selective laser melting of aluminium alloys PANESAR, A., BRACKETT, D., ASHCROFT, I., WILDMAN, R. and HAGUE, R., 2015. Design Framework for Multifunctional Additive Manufacturing: Placement and Routing of Three-Dimensional Printed Circuit Volumes: Journal of Mechanical Design, Transactions of the ASME Journal of Mechanical Design, Transactions of the ASME. 137(11),