Oila, Adrian - Newcastle University - School of Chemical Engineering and Advanced Materials

个人简介

Teaching Fellow (2014-2016), School of Chemical Engineering & Advanced Materials, Newcastle University Research Associate (2006-2014), School of Chemical Engineering & Advanced Materials, Newcastle University Research Associate (2004-2005), Design Unit, Newcastle University

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Gonabadi HI, Oila A, Bull S. Fatigue of Sandwich Composites in Air and Seawater. Journal of Bio- and Tribo-Corrosion 2016, 2, 1-7. Gonabadi HI, Moharrami N, Oila A, Bull SJ. Flexural Characteristics of Tidal turbine blades made of composite materials. In: 11th European Wave and Tidal Energy Conference. 2015, Nantes, France. Oila A, Lung C, Bull S. Elastic properties of eta carbide (η-Fe2C) from ab initio calculations: application to cryogenically treated gear steel. Journal of Materials Science 2014, 49(5), 2383-2390. Oila A, Bull SJ. Experimental assessment of the elastic properties of thin TiN/AlN superlattice and nano-multilayer coatings. Surface and Coatings Technology 2014, 257, 87-94. Moharrami N, Oila A, Bull SJ. Extracting mechanical properties of copper coatings on oxidized silicon substrates by nanoindentation. Journal of Physics D: Applied Physics 2014, 47(31), 315104. Bull SJ, Sanderson L, Moharrami N, Oila A. Effect of microstructure on hardness of submicrometre thin films and nanostructured devices. Materials Science and Technology 2012, 28(9-10), 1177-1185. Abadaia FB, Bull SJ, Oila A. Surface wear resistance of 304 austenitic stainless steel modified by colossal carbon supersaturation and TiN coating. Journal of Materials Science and Engineering B 2012, 2(2), 103-111. Oila A, Sanderson L, Bull S, Fleischer N. Inorganic fullerene-like materials for increased operational life in rolling/sliding applications. Tribology - Materials, Surfaces and Interfaces 2010, 4(4), 163-166. Oila A, Bull SJ. Atomistic simulation of Fe-C austenite. Computational Materials Science 2009, 45(2), 235-239. Shaw BA, Aylott CJ, Oila A, Jao TC. Characterisation of microstructural transformations in micropitted gears. In: Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition. 2009, Lake Buena Vista, FL, United states: Society of Tribologists and Lubrication Engineers. Oila A, Bull SJ. Assessment of the factors influencing micropitting in rolling/sliding contacts. Wear 2005, 258(10), 1510-1524. Oila A, Shaw BA, Aylott CJ, Bull SJ. Martensite decay in micropitted gears. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 2005, 219(2), 77-83. Soare S, Bull SJ, Oila A, O'Neill AG, Wright NG, Horsfall A, Dos Santos JMM. Obtaining mechanical parameters for metallisation stress sensor design using nanoindentation. Zeitschrift für Metallkunde 2005, 96(11), 1262-1266. Oila A, Bull SJ. Phase transformations associated with micropitting in rolling/sliding contacts. Journal of Materials Science 2005, 40(18), 4767-4774. Soare S, Bull SJ, Oila A, O'Neill AG, Wright N, Horsfall A, dos Santos J. Determination of mechanical parameters for rotating MEMS structures as a function of deposition method. In: Thin Films: Stresses and Mechanical Properties X. 2004, Boston, Massachusetts, USA: Materials Research Society. Soare S, Bull SJ, Oila A, O'Neill A, Wright N, Horsfall A, dos Santos J. Determination of mechanical parameters for rotating MEMS structures as a function of deposition method. In: MRS Fall Meeting 2003. 2004, Boston, Massachusetts, USA. Soare S, Bull SJ, Oila A, O'Neill A, Wright N, Horsfal A, dos Santos J. Determination of mechanical parameters for rotating MEMS as a function of deposition method. In: Thin Films: Stresses and Mechanical Properties X. 2003, Boston, Massachusetts, USA: Materials Research Society Symposium. Soare S, Bull SJ, Oila A, O'Neill AG, Wright N, Horsfall A, Dos Santos J. Determination of mechanical parameters for rotating MEMS structures as a function of deposition method. In: Materials Research Society Symposium Proceedings: Thin Films - Stresses and Mechanical Properties X. 2003, Boston, Massachusetts, USA: Materials Research Society. Dos Santos JMM, Wang K, Soare SM, Horsfall AB, Bull SJ, Wright NG, Oila A, O'Neill AG, Terry JG, Walton AJ, Gundlacj AM, Stevenson JTM. Hinge optimisation in a micro-rotating structure for stress gauging in integrated circuit interconnects. In: Materials Research Society Symposium Proceedings. 2003, Boston, Massachusetts, USA. Oila A, Bull SJ. Nanoindentation testing of gear steels. Zeitschrift fur Metallkunde 2003, 94(7), 793-797. dos Santos JMM, Horsfall AB, Soare SM, Oila A, Bull SJ, Wright NG, O'Neill AG, Walton AJ, Gundlach AM, Stevenson JTM. Residual Stress Sensor for the Microelectronics Industry. In: Eurosensors XVII: the 17th European Conference on Solid-State Transducers. 2003, Guimaraes, Portugal: Elsevier.