Mamlouk, Mohamed - Newcastle University - School of Chemical Engineering and Advanced Materials

个人简介

Ph.D. Electrochemical Engineering: Investigation of High Temperature Polymer Electrolyte Membrane Fuel Cells, Newcastle University, August 2008. M.Sc. Chemical Engineering: Applied Process Control (Distinction), Newcastle University, Sept 2003. B.Sc. Hons: Applied Chemistry, Equiv (2:1), Aleppo University, Syria, 2002.

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Espiritu R, Golding G, Scott K, Mamlouk M. Degradation of radiation grafted hydroxide anion exchange membraneimmersed in neutral pH: removal of vinylbenzyl trimethylammonium hydroxidedue to oxidation. Journal of Materials Chemistry A 2017, (ePub ahead of Print). Xing L, Dub S, Chen R, Mamlouk M, Scott K. Anode partial flooding modelling of Proton Exchange Membrane Fuel Cells: Model development and validation. Energy 2016, 96, 80-95. Espiritu R, Mamlouk M, Scott K. Study on the effect of the degree of grafting on the performance of polyethylene-based anion exchange membrane for fuel cell application. International Journal of Hydrogen Energy 2016, 41(2), 1120-1133. Mamlouk M, Scott K. A boron phosphate-phosphoric acid composite membrane for medium temperature proton exchange membrane fuel cells. Journal of Power Sources 2015, 286, 290-298. Xing L, Das PK, Song X, Mamlouk M, Scott K. Numerical Analysis of the Optimum Membrane/Ionomer Water Content of PEMFCs: The Interaction of Nafion Ionomer Content and Cathode Relative Humidity. Applied Energy 2015, 138, 242-257. Xing L, Liu XT, Alaje T, Kumar R, Mamlouk M, Scott K. A two-phase flow and non-isothermal agglomerate model for a proton exchange membrane (PEM) fuel cell. Energy 2014, 73, 618-634. Dumitru A, Mamlouk M, Scott K. Effect of different chemical modification of carbon nanotubes for the oxygen reduction reaction in alkaline media. Electrochimica Acta 2014, 135, 428-438. Xing L, Mamlouk M, Kumar R, Scott K. Numerical investigation of the optimal Nafion? ionomer content in cathode catalyst layer: An agglomerate two-phase flow modelling. International Journal of Hydrogen Energy 2014, 39(17), 9087-9104. Puthiyapura VK, Mamlouk M, Pasupathi S, Pollet BG, Scott K. Physical and electrochemical evaluation of ATO supported IrO2 catalyst for proton exchange membrane water electrolyser. Journal of Power Sources 2014, 269, 451-460. Mamlouk M, Ocon P, Scott K. Preparation and characterization of polybenzimidzaole/diethylamine hydrogen sulphate for medium temperature proton exchange membrane fuel cells. Journal of Power Sources 2014, 245, 915-926. Kumar R, Mamlouk M, Scott K. Sulfonated polyether ether ketone - sulfonated graphene oxide composite membranes for polymer electrolyte fuel cells. RSC Advances 2014, 4(2), 617-623. Scott K, Pilditch S, Mamlouk M. A Model of a High-Temperature Direct Methanol Fuel Cell. Journal of Fuel Cell Science and Technology 2013, 10(5), 051003. Xing L, Mamlouk M, Scott K. A two dimensional agglomerate model for a proton exchange membrane fuel cell. Energy 2013, 61, 196-210. Authayanun S, Mamlouk M, Scott K, Arpornwichanop A. Comparison of high-temperature and low-temperature polymer electrolyte membrane fuel cell systems with glycerol reforming process for stationary applications. Applied Energy 2013, 109, 192-201. Mamlouk M, Scott K. Effect of anion functional groups on the conductivity and performance of anion exchange polymer membrane fuel cells. Journal of Power Sources 2012, 211, 140-146. Mamlouk M, Jang JH, Scott K. Intermediate Temperature Fuel Cell and Oxygen Reduction Studies With Carbon-Supported Platinum Alloy Catalysts in Phosphoric Acid Based Systems. Journal of Fuel Cell Science and Technology 2012, 9(1), 011002. Authayanun S, Mamlouk M, Arpornwichanop A. Maximizing the Efficiency of a HT-PEMFC System Integrated with Glycerol Reformer. International Journal of Hydrogen Energy 2012, 37(8), 6808-6817. Mamlouk M, Horsfall JA, Williams C, Scott K. Radiation grafted membranes for superior anion exchange polymer membrane fuel cells performance. International Journal of Hydrogen Energy 2012, 37(16), 11912-11920. Sousa T, Mamlouk M, Scott K, Rangel CM. Three Dimensional Model of a High Temperature PEMFC. Study of the Flow Field Effect on Performance. Fuel Cells 2012, 12(4), 566-576. Kumar R, Mamlouk M, Scott K. A Graphite Oxide Paper Polymer Electrolyte for Direct Methanol Fuel Cells. International Journal of Electrochemistry 2011, 2011, 434186. Mamlouk M, Sousa T, Scott K. A High Temperature Polymer Electrolyte Membrane Fuel Cell Model for Reformate Gas. International Journal of Electrochemistry 2011, 2011, 520473. Wu X, Scott K, Mamlouk M. A PBI-Sb0.2Sn0.8P2O7-H3PO4 Composite Membrane for Intermediate Temperature Fuel Cells. Fuel Cells 2011, 11(5), 620-625. Mamlouk M, Scott K. A study of oxygen reduction on carbon-supported platinum fuel cell electrocatalysts in polybenzimidazole/phosphoric acid. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 2011, 225(A2), 161-174. álvarez GF, Mamlouk M, Scott K. An Investigation of Palladium Oxygen Reduction Catalysts for the Direct Methanol Fuel Cell. International Journal of Electrochemistry 2011, 2011, 684535. Mamlouk M, Scott K. An investigation of Pt alloy oxygen reduction catalysts in phosphoric acid doped PBI fuel cells. Journal of Power Sources 2011, 196(3), 1084-1089.