个人简介
Ali read for a degree in Materials Engineering at Queen Mary College, University of London between 1978 – 1981. He went on to study for a PhD in Materials (Fracture Mechanics) from 1981- 1986 also at Queen Mary College, University of London. Between 1986 - 1989 he held the position of Post-doctoral Research Assistant in the Chemical Engineering and Chemical Technology Department, Imperial College, University of London. He then took up a position of Post-doctoral Research Assistant in the Cavendish Laboratory, Department of Physics, University of Cambridge. In 1990 Ali became an Upper Senior Research Scientist in the Engineering Research and Design Group, Tun Abdul Razak Laboratory, MRPRA, Hertford. In 1996 Ali moved to a Lectureship at the Department of Materials at Loughborough University.
研究领域
Elastomer-to-elastomer Adhesion Failure and Adhesion Enhancement. Reinforcement of Rubbers with Nanofillers - Rubber-filler nanocomposites Rubber-to-Metal Bond Failure and Bonding Rubber to Nylons. Rubber Blends - Design and Characterization, Crack Growth in Rubbers Under Static or Dynamic Loading Conditions. Interfacial Adhesion Enhancement Between Rubbers and Interfacial Adhesion Failure. Elimination of the Blooming of Chemical Curatives in Rubber Compounds
近期论文
查看导师最新文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
Saeed Ostad Mohaved, Ali Ansarifar, Sakineh Karbalaee Nezhad, Sepideh Atharyfar, ‘A novel industrial technique for recycling ethylene-propylene-diene waste rubber’, Polymer Degradation and Stability, 111, 114-123 (2015).
Kulnida Taptim, Ali Ansarifar and Narongrit Sombatsompop, ‘Effect of organoclay and silver-substituted zeolite on the mechanical and antibacterial properties of a silicone rubber filled with 2-hydroxypropyl-3-piperazinyl-quinoline carboxylic acid methacrylate’, Polymer Engineering & Science, 54, 932-941 (2014).
Farhan Saeed, Ali Ansarifar, Robert J. Ellis and Yared Haile-Meskel, ‘Assessing effect of the reagglomeration and migration of chemical curatives on the mechanical properties of natural rubber vulcanizate’, Advances in Polymer Technology, 32, S1, E153-E165 (2013).
Farhan Saeed, Ali Ansarifar, Robert J. Ellis, Yared Haile-Meskel and M. Shafiq Irfan, ‘Two advanced styrene-butadiene/polybutadiene rubber blends filled with a silanized silica nanofiller for potential use in passenger car tire tread compound’, Journal of Applied Polymer Science, 123, 1518-1529 (2012).