近期论文

查看导师新发文章 （温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Characterization of selectively laser melted Ti-6Al-4V microlattice struts. Selective laser melting of aluminium components Selective laser melting: A unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications. II. Randomized structures The development of a scanning strategy for the manufacture of porous biomaterials by selective laser melting Interface interactions between porous titanium/tantalum coatings, produced by Selective Laser Melting (SLM), on a cobalt–chromium alloy Formation of TiAl intermetallics by heat treatment of cold-sprayed precursor deposits Experimental study of titanium/aluminium deposits produced by cold gas dynamic spray. Selective Laser Melting Selective laser melting of prealloyed high alloy steel powder beds Effect of direct laser re-melting processing parameters and scanning strategies on the densification of tool steels Femtosecond laser micro-structuring of alumina ceramic. SEM-EDS and XRD study of a NiCrAlU alloy at temperatures from 800 degrees C to 1200 degrees C Analysis of cold gas dynamically sprayed aluminium deposits Direct laser remelting of iron with addition of boron Femtosecond laser micro-structuring of aluminium under helium The direct metal laser remelting of copper and tool steel powders What No Heat? A New approach to Additive Metal Fabrication The production of copper parts using DMLR. High density net shape components by direct laser re-melting of single-phase powders The Effect of Surface Contamination on the Transient Oxidation of Ni–20Cr. The oxidation behaviour of an Fe,AI, Si alloy containing uranium as an impurity, oxidised for short times at high temperatures