近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1] Chen B, Li J, Mao F, et al. Numerical study on the characteristics of single wetted flat wire with single droplet impact under the disturbance of airflow[J]. Nuclear Engineering and Design, 2019, 345: 74-84.
[2] Chen B, Tian R, Mao F. Analysis of special phenomena of droplet impact on horizontal liquid film at low velocity[J]. Annals of Nuclear Energy, 2020, 136.
[3] Chen B, Wang B, Mao F, et al. Review on separation mechanism of corrugated plate separator[J]. Annals of Nuclear Energy, 2020, 144.
[4] Chen B, Wang B, Mao F, et al. Analysis of liquid droplet impacting on liquid film by CLSVOF[J]. Annals of Nuclear Energy, 2020, 143.
[5] Chen B, Wang B, Mao F, et al. Experimental study of droplet impacting on inclined wetted wall in corrugated plate separator[J]. Annals of Nuclear Energy, 2020, 137.
[6] Du L, Ruifeng T, Xiaoyi L, et al. Numerical simulation and experimental investigation of structural optimization of capacitance sensors for measuring steam wetness with different coaxial cylinders[J]. Nuclear Engineering and Design, 2013, 262: 88-97.
[7] Du L, Tian R, Zhang P, et al. Numerical simulation and experiment investigating the performance of a capacitance sensor measuring the humidity of wet steam[J]. Measurement Science and Technology, 2011, 22(12).
[8] Ke B, Gao P, Wang B, et al. Study on the thermal hydraulic characteristics of a simulated pressurizer during the blowdown process[J]. Annals of Nuclear Energy, 2021, 153.
[9] Ke B, Gao P, Yang W, et al. Study on estimation of break diameter in the small break loss of coolant accident based on NSGA-II[J]. Annals of Nuclear Energy, 2021, 162.
[10] Liu X Y, Tian R F, Gao Y X, et al. A numerical study of wet steam condensation over a corrugated plate separator. 2014: 805-809.
[11] Liu Y, Shi H L, Gui C, et al. Effect of saturated steam carried downward on the flow properties in the downcomer of steam generator[J]. Energies, 2019, 12(19).
[12] Mao F, Lu M, Xie Y, et al. Effects of mixture parameters variation on the performance of corrugated plate dryer[J]. Progress in Nuclear Energy, 2020, 126.
[13] Mao F, Tian R, Chen Y, et al. Re-entrainment in and optimization of a vane mist eliminator[J]. Annals of Nuclear Energy, 2018, 120: 656-665.
[14] Ming Y, Liu K, Zhao F, et al. Dynamic modeling and validation of the 5 MW small modular supercritical CO2 Brayton-Cycle reactor system[J]. Energy Conversion and Management, 2022, 253.
[15] Ru L, Bowen C, Weibing W, et al. Experimental analysis of droplet impacting on inclined wall of the corrugated plate dryer in steam generator of nuclear power plants[J]. Annals of Nuclear Energy, 2022, 172: 109062.
[16] Ru L, Chunyuan Z, Bo W, et al. Experimental study on the influence of drainage tank structure on separation performance of vertical corrugated plate dryer in PWR[J]. Annals of Nuclear Energy, 2022, 177: 109292.
[17] Ru L, Feng M, Bowen C, et al. Influence of the structure of drainage tank on the separation performance of corrugated plate dryer in NPPs: A short communication[J]. Annals of Nuclear Energy, 2022, 169: 108930.
[18] Tian R, Mao X, Gao P, et al. Single-phase computational fluid dynamics applicability for the study of three-dimensional flow in 55 rod bundles with spacer grids[J]. Chinese Journal of Mechanical Engineering (English Edition), 2012, 25(4): 738-744.
[19] Wang B, Chen B, Ke B, et al. Effect of physical property parameters on critical airflow velocity of a corrugated plate dryer[J]. Annals of Nuclear Energy, 2020, 140.
[20] Wang B, Chen B, Ke B, et al. Study on strip-shaped liquid film in the corrugated plate dryer[J]. Annals of Nuclear Energy, 2020, 139.
[21] Wang B, Chen B, Li R, et al. Study on fracture morphology of water film on the wall of vertical corrugated plate under shear of the air flow[J]. Annals of Nuclear Energy, 2020, 136.
[22] Wang B, Chen B, Li R, et al. Analysis of fluctuation and breakdown characteristics of liquid film on corrugated plate wall[J]. Annals of Nuclear Energy, 2020, 135.
[23] Wang B, Chen B, Tian R. Review of research progress on flow and rupture characteristics of liquid film on corrugated plate wall[J]. Annals of Nuclear Energy, 2019, 132: 741-751.
[24] Wang B, Chen B, Wang G, et al. Analysis of influencing factors of rupture phenomenon of liquid film on the wall of corrugated plate dryer[J]. Annals of Nuclear Energy, 2020, 147.
[25] Wang B, Chen B, Wang G, et al. Back propagation (BP) neural network prediction and chaotic characteristics analysis of free falling liquid film fluctuation on corrugated plate wall[J]. Annals of Nuclear Energy, 2020, 148.
[26] Wang B, Chen B, Wen J, et al. Review and Prospect of the Measurement Technology of the Thickness of the Liquid Film on the Wall of the Corrugated Plate Dryer[J]. Frontiers in Energy Research, 2020, 8.
[27] Wang B, Chen B, Wen J, et al. A Mini Review of Research Progress of Nuclear Physics and Thermal Hydraulic Characteristics of Lead-Bismuth Research Reactor in China[J]. Frontiers in Energy Research, 2020, 8.
[28] Wang B, Ke B, Chen B, et al. Study on the size of secondary droplets generated owing to rupture of liquid film on corrugated plate wall[J]. International Journal of Heat and Mass Transfer, 2020, 147.
[29] Wang B, Lu C, Tian R. Characteristics of liquid film rupture at wave plate corner: A short communication[J]. Annals of Nuclear Energy, 2021, 151.
[30] Wang B, Tian R. Study on fluctuation feature and breakdown characteristic of water film on the wall of corrugated plate[J]. International Journal of Heat and Mass Transfer, 2019, 143.
[31] Wang B, Tian R. Judgement of critical state of water film rupture on corrugated plate wall based on SIFT feature selection algorithm and SVM classification method[J]. Nuclear Engineering and Design, 2019, 347: 132-139.
[32] Wang B, Tian R. Investigation on flow and breakdown characteristics of water film on vertical corrugated plate wall[J]. Annals of Nuclear Energy, 2019, 127: 120-129.
[33] Wang B, Tian R. Study on characteristics of water film breakdown on the corrugated plate wall under the horizontal shear of airflow[J]. Nuclear Engineering and Design, 2019, 343: 76-84.
[34] Wang B, Wang G, Chen B, et al. Research on reflux phenomenon of liquid film on the wall of corrugated plate dryer[J]. Annals of Nuclear Energy, 2020, 141.
[35] Wang G, Wang B, Wen J, et al. Investigation on the hydraulic process of inertia tank in the case of pump trips[J]. Nuclear Engineering and Design, 2021, 379.
[36] Wang G, Wang B, Wen J, et al. Scaling analysis for inertia tank based on the cold state of deep pool-type nuclear heating reactor[J]. Annals of Nuclear Energy, 2021, 151.
[37] Wang G, Wang B, Wen J, et al. Experimental study on the hydraulic characteristics of inertia tank after the failure of pump power[J]. Annals of Nuclear Energy, 2021, 151.
[38] Wang G, Yue Z, Sun R, et al. Preliminary study on thermal–hydraulic behavior of loss-of-flow accident in deep pool-type nuclear reactor[J]. Annals of Nuclear Energy, 2022, 170.
[39] Wang W, Zhang M, Cheng K, et al. A coupled model of corrosion of the steam generator heat transfer tube[J]. Nuclear Engineering and Design, 2022, 396.
[40] Wen J, Tian R, Tan S, et al. The weeping characteristic of submerged multi-orifice plate[J]. Chinese Journal of Chemical Engineering, 2020, 28(4): 955-968.
[41] Wen J, Tian R, Tan S, et al. Numerical simulation of gas holdup in nocoalescence media of industrial-scale bubble column[J]. Progress in Nuclear Energy, 2022, 146.
[42] Wu Y, Zhan C, Li D, et al. Multi-objective optimization analysis of corrugated plate dryer[J]. Annals of Nuclear Energy, 2023, 180.
[43] Chen B, Wang B, Mao F, et al. Numerical study on characteristics of single droplet impacting on wetted surface[J]. Experimental and Computational Multiphase Flow, 2021, 3(1): 59-67.
[44] Wang B, Ke B, Chen B, et al. A technical review of research progress on thin liquid film thickness measurement[J]. Experimental and Computational Multiphase Flow, 2020, 2(4): 199-211.
京公网安备 11010802027423号