当前位置: X-MOL首页全球导师 国内导师 › 黄亮

个人简介

2014.11~至今 华中科技大学(副教授) 2011.12~2014.10 华中科技大学(讲师) 2009.11~2011.11 北京有色金属研究总院(博士后) 2004.9~2009.9 西北工业大学(博士,硕博连读) 2003.9~2004.7 西北工业大学(硕士) 1999.9~2003.7 西北工业大学(本科)

研究领域

先进金属材料塑性成形技术及其形状/性能一体化控制、模具CAD/CAM等方面的研究,包括: (1)多时空脉冲强磁场成形技术; (2)大型构件局部控温控流整体模锻成形技术; (3)强力旋压成形技术。

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

[1]Rong Zeng, Fei Ma, Liang Huang*, Jianjun Li. Investigation on spinnability of profiled power spinning of aluminum alloy. The International Journal of Advanced Manufacturing Technology, 2015, 80(1-4): 535-548. [2]Wenyong Luo, Liang Huang*, Jianjun Li, Xianlong Liu, Zhiqiang Wang. A novel multi-layer coil for a large and thick-walled component by electromagnetic forming. Journal of Materials Processing Technology, 2014, 214(11): 2811-2819. [3]Huijuan Ma, Liang Huang*, Mengqiu Wu, Jianjun Li. Dynamic ductility and fragmentation for aluminum alloy using electromagnetic ring expansion. Procedia Engineering, 2014, 81: 787-792. [4]Liang Huang, Rong Zeng, Xiaoting Zhang, Jianjun Li*. Study on plastic deformation behavior of hot splitting spinning of TA15 titanium alloy. Materials and Design, 2014, 58: 465-474. [5]Huijuan Ma, Liang Huang*, Yi Tian, Jianjun Li. Effects of strain rate on dynamic mechanical behavior and microstructure evolution of 5A02-O aluminum alloy. Materials Science and Engineering A, 2014, 606(6): 233-239. [6]Yi Tian, Liang Huang*, Huijuan Ma, Jianjun Li. Establishment and comparison of four constitutive models of 5A02 aluminium alloy in high-velocity forming process. Materials and Design, 2014, 54: 587-597. [7]黄亮, 徐子文, 刘贤龙, 李建军*. 铝合金异型面厚板件电磁翻边线圈设计和有限元分析. 锻造与冲压, 2014, (22): 38-43. [8]黄亮, 骆文勇, 刘贤龙, 李建军*. 大型复杂型面铝合金翻边件电磁成形塑性流动行为研究. 机械工程学报, 2013, 49(24): 24-29, 38. [9]Wenyong Luo, Liang Huang*, Xianlong Liu, Jianjun Li*. Numerical modeling and experimental analysis of deformation behaviors during electromagnetic flaring process of thin-walled copper tubes. AIP Conference Proceedings, 2013, 1532: 937-943. [10]黄亮*, 徐哲, 代春, 惠松骁, 叶文君, 王国, 谢水生, 李宏伟. TA18钛合金管材多行程皮尔格冷轧过程三维有限元模拟: Ⅱ塑性变形行为分析. 稀有金属材料与工程, 2013, 42(4): 741-745. [11]黄亮*, 徐哲, 代春, 惠松骁, 叶文君, 王国, 谢水生, 李宏伟. TA18钛合金管材多行程皮尔格冷轧过程三维有限元模拟: I理论解析、模型建立与验证. 稀有金属材料与工程, 2013, 42(3): 524-529. [12]Liang Huang, He Yang*, Mei Zhan, Lijin Hu. Forming characteristics of splitting spinning based on the behaviors of roller. Computational Materials Science, 2009, 45(2): 449-461. [13]黄亮, 杨合*, 詹梅, 胡莉巾. 旋轮参数对铝合金分形旋压的影响规律. 塑性工程学报, 2009, 16(2): 85-89. [14]Liang Huang, He Yang*, Mei Zhan. 3D-FE modeling method of splitting spinning. Computational Materials Science, 2008, 42(4): 643-652. [15]Liang Huang, He Yang*, Mei Zhan, Yuli Liu. Analysis of splitting spinning force by the principal stress method. Journal of Materials Processing Technology, 2008, 201(1-3): 267-272. [16]Huang Liang, Yang He*, Zhan Mei, Hu Lijin. Numerical simulation of influence of material parameters on splitting spinning of aluminum alloy. Transactions of Nonferrous Metals Society of China, 2008, 18(3): 674-681. [17]黄亮, 杨合*, 詹梅. 分形旋压成形技术研究进展. 材料科学与工艺, 2008, 16(4): 476-480.

推荐链接
down
wechat
bug