近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Yicheng Jiang,Ling Liu, Jia Yan,Zhanjun Wu. Room-to-low temperature thermo-mechanical behavior and corresponding constitutive model of liquid oxygen compatible epoxy composites. Composites Science and Technology 2024, 245, DOI: 110357.
Qin Ouyang, Ling Liu and Zhanjun Wu. In-situ damage self-sensing and strength recovery activated by self-electricity in carbon fibrous composites embedded with multi-functional interleaves. Composites Part A: Applied Science and Manufacturing, 2023, 175, DOI: 107777.
Ouyang Qin, Liu Ling, Wu Zhanjun. Electrothermally self-Healing delamination cracks in carbon/epoxy composites using sandwich and tough carbon nanotube/copolymer interleaves. Polymers, 2022, Vol.14(20): 4313.
Pan Wu, Ling Liu, Zhanjun Wu. A transesterification-based epoxy vitrimer synthesis enabled high crackself-healing efficiency to fibrous composites. Composites Part A: Applied Science and Manufacturing, 2022, 162, DOI: 107170.
Tao Sun, Hongyu Fan, Ling Liu, Zhanjun Wu. Double modified amino phenolic resin particles: A novel modifier to thermally stable, mechanically-strong and tough epoxy. Composites Science and Technology 2022, 228, DOI: 109645.
Xu Feng, Jinrui Ye, Ling Liu. Thickness and pore effect of nanotube interleaves on interlaminar shear properties of carbon fibrous laminates. Composites Communications, 2022, 29, DOI: 100998.
Guangming Yang, Qin Ouyang, Jinrui Ye, Ling Liu. Improved tensile and single-lap-shear mechanical-electrical response of epoxy composites reinforced with gridded nano-carbons. Composites Part A: Applied Science and Manufacturing, 2022, 152, DOI: 106712.
Qin OuYang, Xiaolong Wang, Ling Liu. High crack self-healing efficiency and enhanced free-edge delamination resistance of carbon fibrous composites with hierarchical interleaves. Composites Science and Technology 2022, 217, DOI: 109115.
Wang, Haifeng, Yicheng Jiang, and Ling Liu. Meso-Mechanical Simulation of the Mechanical Behavior of Different Types of Steel Fibers Reinforced Concretes. Sustainability 2022, 14.23: 15803.
骆雪芹;唐蓝天;李娟子;崔运广;刘玲. 低温对碳纤维复合材料弯曲性能影响试验研究.力学季刊，2022, 43(03): 537-546.
冯旭, 刘玲. 氨基化碳管薄膜对碳纤维复合材料层间性能的影响. 复合材料科学与工程.2022(02):82-88.
王维, 欧阳琴, 刘玲. CNT/EMAA/环氧胶膜对复合材料裂纹的电热修复研究. 复合材料科学与工程. 2022(03): 66-72.
Bingchen Wang, Xu Feng, Ling Liu. Enhanced electrothermal effect of carbon fibrous composites decorated with high conductive carbon nanotube webs. Chinese Journal of Aeronautics, 2021, 34(11): 243-253. DOI: https://doi.org/10.1016/j.cja.2021.04.016.
Lulu Shen, Yushun Zhao, Peter Samora Owuor, Chao Wang, Chao Sui, Shuai Jia, Jia Liang, Ling Liu, Jun Lou. A Molecular-Level Interface Design Enabled High-Strength and High-Toughness Carbon Nanotube Buckypaper, Macromolecular Materials and Engineering, 2021, 2100244. DOI: 10.1002/mame.202100244.
Wei Wang, Qin Ouyang, LingLiu, ZhanjunWu. Novel nanotube/poly (ethylene-co-methacrylic acid)/epoxy composite adhesive possessing in-situ electrical-heating activated crack healing function. Composites Part A: Applied Science and Manufacturing, 2021, 150, DOI: 106599.
Guangming Yang, Xu Feng, Wei Wang, Qin OuYang and Ling Liu. Effective interlaminar reinforcing and delamination monitoring of carbon fibrous composites using a novel nano-carbon woven grid. Composites Science and Technology 2021, 213, DOI: 108959.
Guangming Yang, Xu Feng, Wei Wang, Qin OuYang, Ling Liu, Zhanjun Wu. Graphene and carbon nanotube-based high-sensitive film sensors for in-situ monitoring out-of-plane shear damage of epoxy composites. Composites Part B: Engineering, 2021, 204：DOI: 108494.
Ouyang Q, Wang X, Yao Y, Liu L. Improved damping and mechanical properties of carbon fibrous laminates with tailored carbon nanotube/polyurethane hybrid membranes. Polymers and Polymer Composites. 2021, 29(8):1240-50. doi:10.1177/0967391120962998.
王炳琛, 刘玲.电热效应对碳纳米管修饰碳纤维复合材料剪切性能的影响.复合材料科学与工程.2021,3:82-87.
Lulu Shen, Ling Liu, Yexin Zhou, Zhanjun Wu. Thickness effect of carbon nanotube interleaves on free-edge delamination and ultimate strength within a symmetric composite laminate. Composites Part-A Applied Science and Manufacturing, 2020, 132: DOI 105828.
Pan Wu, Ling Liu, Zhanjun Wu. Synthesis of Diels-Alder Reaction-based Remendable Epoxy Matrix and Corresponding Self-healing Efficiency to Fibrous Composites. Macromolecular Materials and Engineering, 2020, 305(10), DOI:10.1002/mame.202000359.
高雅,刘玲.EMAA/CNT膜对复合材料Ⅱ型层间断裂韧性及自修复率的影响.复合材料科学与工程.2020,2:25-31.
Lulu Shen, Ling Liu, Zhanjun Wu. Tensile mechanical behaviors of high loading of carbon nanotube/epoxy composites via experimental and finite element analysis. Advanced Engineering Materials. 2019(2019): DOI 105510.
Ya Gao, Ling Liu, Zhanjun Wu, Zheng Zhong. Toughening and self-healing fiber-reinforced polymer composites using carbon nanotube modified poly (ethylene-co-methacrylic acid) sandwich membrane. Composites Part-A Applied Science and Manufacturing, 2019, 124: DOI 105510.
Xueying Cheng, Ling Liu, Xu Feng, Lulu Shen, and Zhanjun Wu. Low Temperature-Based Flexural Properties of Carbon Fiber/Epoxy Composite Laminates Incorporated with Carbon Nanotube Sheets. Macromolecular Materials and Engineering, 2019(2019), DOI: 10.1002/201900247.
Guangming Yang, Ling Liu, Zhanjun Wu. Improved strain sensing capability of Nano-carbon free-standing Buckypapers based strain gauges. Smart Materials and Structures 2019, 28(6), DOI: 10.1088.
Ling Liu, Qiaoxin Yang and Jingwen Shen. Response to: Comment on “Correlation between Porosity and Electrical-Mechanical Properties of Carbon Nanotube Buckypaper with Various Porosities”. Journal of Nanomaterials 2019, doi.org/10.1155/2019/2541239.
王炜,刘玲. VARTM成型双轴向经编织物层板及其冲击性能研究. 玻璃钢/复合材料,2019,2:39-44.
Lulu Shen, Ling Liu, Wei Wang, Yexin Zhou. In situ self-sensing of delamination initiation and growth in multi-directional laminates using carbon nanotube interleaves. Composites Science and Technology 2018, 167:14-147.
[30]Ling Liu, Qiaoxin Yang, Yiwen Zhou. Improved mechanical properties of positive-pressure filtered CNT buckypaper reinforced epoxy composites via modified preparation process. Polymer Composites 2018,39(5)：1647-1652.
Ling Liu, Jinwen Wu, Yexin Zhou. Enhanced delamination initiation stress of quasi-isotropic laminates under in-plane tension by interleaving with CNT buckypaper sensor. Composites Part A-Applied Science and Manufacturing 2016, 89：10-17.
Qiaoxin Yang, Ling Liu, H David and Mircea Chipara. Microstructure, electrical conductivity and microwave absorption properties of -FeNi decorated carbon nanotube composites. Composites Part B-Engineering 2016, 87: 256–262.
Ling Liu, Lulu Shen, Yexin Zhou. Improving the interlaminar fracture toughness of carbon/epoxy laminates by directly incorporating with porous CNT buckypaper. Journal of reinforced plastics and composites. 2016, 35(2): 165-176.
Ling Liu, Qiaoxin Yang and Jingwen Shen. Correlation between porosity and electrical-mechanical properties of carbon nanotube buckypaper with various porosities. Journal of Nanomaterials 2015, 16: 1-9. DOI: 10.1155/2015/945091.
杨乔馨，刘玲，王晓蕾. CNTs/TDE85环氧复合材料的热物理和力学性能. 玻璃钢/复合材料2015, 7: 33-37.
刘玲, 杨乔馨. 碳纳米管网格对碳纤维复合材料层间剪切性能的影响. 固体力学学报, 2015, 36: 80-84.
Ling Liu, Hongying Zhang and Yexin Zhou. Quasi-static mechanical response and corresponding analytical model of laminates incorporating with nanoweb interlayers. Composite Structures 2014, 111: 436-445.
周毅文, 刘玲, 杨乔馨. 功能化MWCNTs网格/环氧树脂复合材料的制备及性能. 复合材料学报 2014, 31(4): 866-872.
Ling Liu, Yexin Zhou and Shengqiang Pan. Experimental and analysis of the mechanical behaviors of multi-walled nanotubes/polyurethane nanoweb-reinforced epoxy composites. Journal of Reinforced Plastics and Composites 2013, 32(11): 823-834.
王震宇,刘玲，宫占峰，薛元德. NCF/环氧层板开孔拉伸渐进损伤分析. 复合材料学报，2013, 30(s): 147-152.
王占吉,刘玲,晏冬秀, 何少刚. 纤维层内树脂流动的空气耦合超声无损检测. 复合材料学报, 2013, 30(2): 24-30.
陈萍,刘玲, 王占吉, 何少刚. 受热过程树脂浸润流动的超声无损评估. 航空材料学报, 2013, 33(4): 65-70.
Ling Liu, Shengqiang Pan. Preparation and Properties of SWNTs/PU Conductive Nonwovens with High SWNTs Loadings. Integrated Ferroelectrics 2012, 136: 118-126.
Ling Liu and Shengqiang Pan. Comparative Study of the Comprehensive Properties of Multi-walled Nanotubes/ Polyurethane Nanofibrous Membranes with and without thermal treatment. Journal of nanomaterials 2012(2012):1875-1890.
王强，刘玲. MWCNTs对碳纤维非褶皱无纺布/环氧层合板力学性能的影响. 复合材料学报, 2012, 29(3): 16-22.
潘胜强, 刘玲,黄争鸣. MWNTs/PU复合超细纤维的热性能及导电性能. 复合材料学报,2009,26(2):79-84.
Ling Liu, Zhengming Huang, Guiying Xu. Mode II Interlaminar delamination of composite laminates incorporating with polymer ultrathin fibers. Polymer Composites 2008, 29(3):285-292.
Ling Liu, Yanmin Liang, Guiying Xu. Mode I interlaminar fracture of composite laminates incorporating with ultrathin fibrous sheets. Journal of Reinforced Plastics and Composites 2008, 27(11): 1147-1162.
潘胜强, 刘玲,黄争鸣. MWNTs/PU复合微/纳米纤维的形态及力学性能. 复合材料学报,2008,25(3):98-104.
刘玲, 梁燕民. MWNTs/环氧的吸波与力学性能. 宇航材料工艺 2008, 1: 40-42.
Ling Liu, Yanmin Liang, Guiying Xu. Response of mode II interlaminar fracture toughness of composite laminates with carbon nanotubes interlayer. Proceedings of the Society of Photo-Optical Instrumentation Engineers. 2007, 6423: 42351.
Xiaojian Han, Zhengming Huang, Ling Liu, Chuanglong He, Qingsheng Wu, Yan Li. Composite nanofibers for textile applications. Solid State Phenomena. 2007,121-123:1237-1240.
Xiaojian Han, Zhengming Huang, Chuanglong He, Ling Liu. Preparation and characterization of core-shell structured nanofibers by coaxial electrospinning. High Performance Polymers. 2007, 19(2): 147-159.
Xiaojian Han, Zhengming Huang, Chuanglong He, Ling Liu, Qingsheng Wu. Preparation and characterization of polycarbonate/TiO2 ultrafine fibers. Journal of Inorganic Materials. 2007, 22(3): 407-412.
刘玲, 黄争鸣, 周烨欣, 徐贵营. 超细纤维增强复合材料Ⅰ型层间断裂韧性分析. 复合材料学报,2007,24(4):166-171.
Ling Liu, Zhang BM, Wang DF. Effects of cure cycles on void content and mechanical properties of composite laminates. Composite Structures 2006, 73(3): 303-309.
Ling Liu, Huang ZM, He CL. Mechanical performance of laminated composites incorporated with nanofibrous membranes. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 2006, 435(5): 309-317.
Xiaojian Han, Zhengming Huang, Chuanglong He, Ling Liu, et al. Coaxial electrospinning of PC(shell)/PU(core) composite nanofibers for textile application. Polymer Composites. 2006, 27(4): 381-387.
Chuanglong He, Zhengming Huang, Xiaojian Han, Ling Liu et al. Coaxial electrospun poly (L-lactic acid) ultrafine fibers for sustained drug delivery. Journal of Macromolecular Science-Part B. 2006, 45(4): 515-524.
刘玲, 黄争鸣, 董国华, 袁国青, 何创龙, 韩晓建. 层间环氧纳米纤维薄膜对层合板力学性能的影响. 复合材料学报,2006,23(3):15-19.
刘玲, 黄争鸣, 董国华, 袁国青. 含环氧-SiC复合微/纳米纤维的层合板制备及力学性能研究. 复合材料学报2006, 23 (3): 20-24.
刘玲, 张博明, 王殿富, 武湛君. 聚合物基复合材料中孔隙率及层间剪切性能的实验表征. 航空材料学报 2006, 26(4): 115-118.
Ling Liu, Boming Zhang, Zhanjun Wu and Dianfu Wang. Effects of Cure Pressure Induced Voids on the Mechanical Strength of Carbon/Epoxy Laminates. Journal of Materials Science & Technology 2005, 21(1): 87-91.
Chuanglong He, Zhengming Huang, Ling Liu, Xiaojian Han. Electrospun core-shell PLLA nanofiber and its potential for drug release. Proceedings of 2005 International Conference on Advanced Fibers and Polymer Materials, 2005, 1-2: 708-712.
刘玲, 路明坤, 张博明, 王殿富, 郑岩, 张春清. 孔隙率对碳纤维复合材料超声衰减系数和力学性能的影响. 复合材料学报 2004, 21(5): 116-121.
京公网安备 11010802027423号