近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
X.R. Guan, Q. Chen, S.J. Qu*, G.J. Cao, H. Wang*, A.H. Feng, D.L. Chen*. Adiabatic shear instability in a titanium alloy: Extreme deformation-induced phase transformation, nanotwinning and grain refinement. J. Mater. Sci. Technol. 150 (2023) 104-113.
Z.J. Yu, Z. Chen, D.D. Qu, S.J. Qu, H. Wang*, F. Zhao, C.Q. Zhang, A.H. Feng, D.L. Chen*. Microstructure and electrochemical behavior of a 3D-printed Ti-6Al-4V alloy. Materials. 15 (2022) 4473.
C. Li, J.L. Sun, A.H. Feng*, H. Wang, X.Y. Zhang, C.Q. Zhang, F. Zhao, G.J. Cao, S.J. Qu, D.L. Chen*. Active slip mode analysis of an additively manufactured Ti-6Al-4V alloy via in-grain misorientation axis distribution. Metals. 12 (2022) 532.
J. Chen, Q. Chen, S.J. Qu*, H.P. Xiang, C. Wang, J.B. Gao, A.H. Feng, D.L. Chen*. Oxidation mechanisms of an intermetallic alloy at high temperatures. Scripta Materialia. 199 (2021) 113852.
Y.L. Zhang, Z. Chen, S.J. Qu*, A.H. Feng, G.B. Mi, J. Shen, X. Huang, D.L. Chen*. Multiple a sub-variants and anisotropic mechanical properties of an additively-manufactured Ti-6Al-4V alloy, J. Mater. Sci. Technol. 70 (2021) 113-124.
Y.L. Zhang, Z. Chen, S.J. Qu*, A.H. Feng, G.B. Mi, J. Shen, X. Huang, D.L. Chen*. Cyclic deformation behavior of a 3D-printed Ti-6Al-4V alloy. J. Alloys Compd. 825 (2020) 153971.
Y.L. Zhang, A.H. Feng*, S.J. Qu, J. Shen, D.L. Chen*. Microstructure and low cycle fatigue of a Ti2AlNb-based lightweight alloy. J. Mater. Sci. Technol. 44, (2020) 140-147.
Z.G. Zhang, S.J. Qu*, G.R. Cui*, A.H. Feng, J. Shen, D.L. Chen*. A new mechanism of dynamic phase transformations in an isothermal forged beta-gamma intermetallic alloy. Materials. 12 (2019) 2787.
G.D. Wu, G.R. Cui, S.J. Qu*, A.H. Feng, G.J. Cao, B.H. Ge, H.P. Xiang, J. Shen, D.L. Chen*. High-temperature oxidation mechanisms of nano-/submicro-scale lamellar structures in an intermetallic alloy. Scripta Materialia. 171 (2019) 102-107.
C.K. Yan, G.R. Cui*, S.J. Qu, A.H. Feng, J. Shen, D.L. Chen. Static recrystallization of pure titanium after cryo-deformation. Journal of Physics: Conference Series. IOP pubishing, 1270 (2019) 012040.
K. Zhu, S.J. Qu, A.H. Feng*, J.L. Sun, J. Shen. Microstructural evolution and refinement mechanism of a beta-gamma TiAl-based alloy during multidirectional isothermal forging. Materials. 12 (2019) 2496.
Y.J. Wu, A.H. Feng*, S.J. Qu, X. Hu, J. Shen. Macro-microscopic field evolution of Ti6Al4V alloy during isothermal upsetting based on deform platform. Materials Research Express. 6 (2019) 056505.
Z.X. Zhang, S.J. Qu*, A.H. Feng, X. Hu, J. Shen. Microstructural mechanisms during multidirectional isothermal forging of as-cast Ti-6Al-4V alloy with an initial lamellar microstructure. J. Alloys Compd. 713 (2019) 277-287.
朱凯，冯艾寒，曲寿江，沈军，铸态Ti-44Al-4Nb-(Mo,Cr,B)合金的热变形行为及热加工图，有色金属工程，9(9) (2019) 34-39.
闫辰侃，曲寿江，冯艾寒，沈军，钛及钛合金形变孪晶的研究进展，稀有金属，43(5) (2019) 449-460. (Cover page of the journal issue)
S.J. Qu, A.H. Feng*, M.R. Shagiev, H. Xie, B.B. Li, J. Shen. Superplastic behavior of the fine-grained Ti-21Al-18Nb-1Mo-2V-0.3Si intermetallic alloy. Letters on Materilals. 8 (4s), (2018) 567-571.
J.M. Xiang, G.B. Mi, S.J. Qu*, X. Huang, Z. Chen, A.H. Feng, J. Shen, D.L. Chen**. Thermodynamic and microstructural study of Ti2AlNb oxides at 800oC. Scientific Reports. 8 (2018) 1276.
K. Zhu, S.J. Qu, A.H. Feng, J.L. Sun, J. Shen*. Evolution of the microstructure and lamellar orientation of a beta-solidifying gamma-TiAl-based alloy during hot compression. Metals. 8 (2018) 445.
C.K. Yan, A.H. Feng*, S.J. Qu, J.L. Sun, J. Shen. Hot deformation and grain refinement mechanisms of commercially pure titanium processed via three-directional cryo-compression. Mater. Sci. Eng. A 731 (2018) 266-277.
C.K. Yan, A.H. Feng*, S.J. Qu, G.J. Cao, J.L. Sun, J. Shen, D.L. Chen**. Dynamic recrystallization of titanium: Effect of pre-activated twinning at cryogenic temperature. Acta Mater. 154 (2018) 311-324.
Z.X. Zhang, S.J. Qu, A.H. Feng, X. Hu, J. Shen*. The low strain rate response of as-cast Ti-6Al-4V alloy with an initial coarse lamellar structure. Metals. 8 (2018) 270-1-13.
S.J. Qu*, S.Q. Tang, A.H. Feng, C. Feng, J. Shen, D.L. Chen**. Microstructural evolution and high-temperature oxidation mechanisms of a titanium aluminide based alloy. Acta Mater. 148 (2018) 300-310.
S.Q. Tang, S.J. Qu, A.H. Feng, C. Feng, J. Shen*, D.L. Chen**. Core-multishell globular oxidation in a new TiAlNbCr alloy at high temperatures. Scientific Reports. 7 (2017) 3483.
Z.X. Zhang, S.J. Qu*, A.H. Feng, J. Shen, D.L. Chen*. Hot deformation behavior of Ti-6Al-4V alloy: Effect of initial microstructure. J. Alloys Compd.. 718 (2017) 170-181.
Z.X. Zhang, S.J. Qu*, A.H. Feng, J. Shen. Achieving grain refinement and enhanced mechanical properties in Ti-6Al-4V alloy produced by multidirectional isothermal forging. Mater. Sci. Eng. A 692 (2017) 127-138.
陶国强，祁广源，曲寿江*，沈军，多向等温锻造Ti-44Al-4Nb-1.5Cr-0.5Mo-0.1B-0.1Y合金高温压缩变形行为研究，钛工业进展，35(3) (2018) 11-15.
张胜雷，陈卓，曲寿江*，冯艾寒，陆煦，沈军，陈道伦，热处理对电子束选区熔化制备的Ti-6Al-4V合金组织与力学性能的影响，热加工工艺，47(10) (2018) 226-231.
汤守巧，曲寿江*，冯艾寒，冯聪，崔扣彪，沈军，TiAl基合金高温抗氧化研究进展，稀有金属，41(1) (2017) 81-93.
程祥霞，曲寿江*，冯艾寒，沈军，钛铝金属间化合物晶团与片层尺寸效应研究进展，稀有金属，40(4) (2016) 393-402.
朱慧萍，曲寿江*，祁广源，沈军，Ti2AlNb基合金轧板高温抗氧化性能研究，稀有金属，40(2) (2016) 104-109.
S. J. Qu, A. H. Feng, L. Geng, Z. Y. Ma, J. C. Han. DSC analysis of liquid volume fraction and compressive behavior of the semi-solid Si3N4w/Al-Si composite. Scripta Mater.. 56 (11) (2007) 951-954.
S.J. Qu, L. Geng, J.C. Han, SiCp/Al composites fabricated by modified squeeze casting technique, J. Mater. Sci. Technol. 23(5) (2007) 641-644
S.J. Qu, J.C. Han, S.H. Meng. Compressive deformation behavior of the ferritic oxide dispersion strengthened alloys at elevated temperatures, Asian Pacific Conference on Fracture and Strength ’06, Sanya, Hainan Island, China, 2006.11
S. Chen, S.J. Qu, J. Liang, J.C. Han. Sintering and microstructure evolution of columnar nickel-based superalloy sheets prepared by EB-PVD. J. Alloys Compd., 507(1) (2009) 146-150
京公网安备 11010802027423号