王继强 - 哈尔滨工业大学

个人简介

工作经历哈尔滨工业大学助理教授 2023.07-至今教育经历 2019.09-2023.06 机械工程哈尔滨工业大学博士 2017.09-2019.06 机械制造及其自动化哈尔滨工业大学硕士 2013.09-2017.06 机械工程东北大学秦皇岛分校学士荣誉称号黑龙江省优秀毕业生 2023 The 8th International Conference on Nanomanufacturing & the 4th AET Symposium on ACSM and Digital Manufacturing ‘Best Paper Award’. 2022 博实博士生一等奖学金 2022 博士研究生国家奖学金 2021 黑龙江省三好学生 2019

研究领域

基于原子力显微镜的纳米铣削加工、检测及应用

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Wang J Q, Yan Y D, Li Z H, Geng Y Q. Towards understanding the machining mechanism of the atomic force microscopy tip-based nanomilling process. International Journal of Machine Tools and Manufacture, 2021, 162: 103701. Yan Y D(导师), Wang J Q, Geng Y Q, Zhang G X. Material removal mechanism of multi-layer metal-film nanomilling. CIRP Annals-Manufacturing Technology, 2022, 71: 61-64. Wang J Q, Yan Y D, Geng Y Q. Fabrication of Chiral Nanostructures through Vibration-Assisted Scratching Combined with Wet Etching for Surface-Enhanced Raman Scattering Substrates. ACS applied nano materials, 2023, 6, 5860-5870. Wang J Q, Yan Y D, Li C, Geng Y Q. Material removal mechanism and subsurface characteristics of silicon 3D nanomilling. International Journal of Mechanical Sciences, 2023, 242:108020. Wang J Q, Zhang Q, Yan Y D, Liu Y, Geng Y Q. Fabrication of periodic nanostructures for SERS substrates using multi-tip probe-based nanomachining approach. Applied Surface Science, 2022, 576:151790. Wang J Q, Yan Y D, Li Z H, Geng Y Q, et al. Processing outcomes of atomic force microscope tip-based nanomilling with different trajectories on single-crystal silicon. Precision Engineering, 2021, 72: 480-490. Wang J Q, Yan Y D, Li Z H, Geng Y Q, et al. Study on the vertical ultrasonic vibration-assisted nanomachining process on single-crystal silicon. Journal of Manufacturing Science and Engineering-Transactions of the ASME, 2022, 144: 041013. Wang J Q, Yan Y D, Jia B S, et al. Study on the processing outcomes of the atomic force microscopy tip-based nanoscratching on GaAs. Journal of Manufacturing Process, 2021, 70: 238-247. Wang J Q, Yan Y D, Chang S Y, et al. Study of the formation mechanism of bundle structures using AFM tip-based nanoscratching approach. Tribology International, 2020, 142: 106000. Wang J Q, Yan Y D, Chang S Y, et al. Label-free surface-enhanced Raman spectroscopy detection of absorption manner of lysozyme based on nanodots arrays. Applied Surface Science, 2020, 509:145332. Wang J Q, Wang Y Z, Yan Y D, Geng Y Q. Fabrication of periodic nanostructure using a multi-tip diamond tool: depth prediction and material removal mechanism. The International Journal of Advanced Manufacturing Technology, 2022, 123, 3485-3496. Wang J Q, Zhang Q, Yan Y D, Kong D P, Geng Y Q. Surface-enhanced Raman scattering integrated with microfluidic device fabricated using atomic force microscopy tip-based nanomachining approach. Proc IMechE Part B: J Engineering Manufacture, 2022, 1-12. Wang J Q, Yan Y D, Wang S W, Shi W B, Geng Y Q. A probe-based nanometric morphology measurement system using intermittent-contact mode. Review of Scientific Instruments, 2022, 93:113701. Geng Y Q(副导师), Wang J Q, Li Z H, Yan Y D, Zhang J R, Gan Y. Comparison of the indentation processes using the single indenter and indenter array: A molecular dynamics study. Nanoscale Research Letters, 2022, 14: 49. Geng Y Q(副导师), Wang J Q, Yan Y D, et al. Fabrication of nanoindentation array based SERS substrate using Conical and Berkovich indenters. Proc IMechE Part C: J Mechanical Engineering Science, 2023, 1-13. Yan Y D(导师), Wang J Q, Chang S Y, et al. Nanofluidic devices prepared by an atomic force microscopy-based single-scratch approach. RSC Advances, 2019, 9: 38814 Yan Y D(导师), Wang J Q, Geng Y Q, et al. Implementation of AFM tip-based nanoscratching process on single crystal copper: Study of material removal state. Applied Surface Science, 2018, 459: 723-731. Wang J Q, Yan Y D, Geng Y Q, et al. Fabrication of polydimethylsiloxane nanofluidic chips under AFM tip-based nanomilling process. Nanoscale Research Letters, 2019, 14: 136. 王继强, 耿延泉, 闫永达. 基于AFM纳米机械刻划加工纳米结构及应用. 自然杂志, 2020, 42(3): 210-220. 会议论文 Wang J Q, Geng Y Q, Yan Y D, Li Hao. Study on the effects of processing parameters on machining outcomes under AFM tip-based nanomilling approach [C]// Proceedings of the 8th International Conference on Nanomanufacturing & 4th AET Symposium on ACSM and Digital Manufacturing, 2022. Wang J Q, Geng Y Q, Jia J S, Yan Y D. A large-scale nanomachining system established based on AFM contact mode [C] // The 9th International Conference of Asian Society for Precision Engineering and Nanotechnology, 2022.