个人简介
教育及工作经历
2023.01-至今 哈尔滨工业大学航空宇航制造工程系 副教授
2022.05-至今 哈尔滨工业大学航空宇航制造工程系 硕导
2020.04-至今 哈尔滨工业大学航空宇航制造工程系 讲师
2020.01-至今 哈尔滨工业大学航空宇航制造工程系 师资博士后
2017.10-2019.01 National University of Singapore (电子与计算机工程系) 联合培养 合作导师：洪明辉教授(新加坡工程院院士)
2014.08-2019.12 哈尔滨工业大学航空宇航制造工程系 (硕博连读，预留师资) 工学博士 导师：Link杨立军教授(系主任)
2010.08-2014.07 哈尔滨工业大学飞行器制造工程系 (获推免资格) 工学学士 导师：Link杨立军教授(系主任)
2007.09-2010.06 江苏省海安高级中学 努力学习的高中生
荣誉与奖励
哈尔滨工业大学优秀思想政治工作者 2021、2022年
哈尔滨工业大学招生工作先进个人 2022年
入选江苏省徐州市“双创计划” 2021年
哈工大机器人创新中心有限公司“协同贡献奖” 2021年
全国研究生电子设计竞赛优秀指导老师（一等奖） 2021年
博士研究生国家奖学金
优秀毕业生、三好学生(干部）
人民奖学金等......
研究领域
水导激光精密加工机理、工艺与装备(国内领先，服务航空、航天、半导体、珠宝首饰等行业)
超快激光微纳制造机理与器件应用(服务新能源、半导体等行业)
激光与物质相互作用理论
纳米尺度极端制造理论
近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Investigations on the water-jet guided laser scribing of thermal barrier coated IC21 nickel-based superalloy[J]. Optics and Laser Technology, 2023. (SCI, IF=5.0)
Investigation on the coaxial-annulus-argon-assisted water-jet-guided laser machining of hard-to-process materials[J]. Materials, 2023. (SCI, IF=3.4)
Femtosecond laser-driven phase engineering of WS2 for nano-periodic phase patterning and sub-ppm ammonia gas sensing[J]. Small, 2023. (SCI, IF=13.3)
Investigation on 355nm picosecond laser machining of carbon fiber reinforced polymer composites[J]. Journal of Manufacturing Processes, 2023. (SCI, IF=6.0)
One step femtosecond laser irradiation of single-crystal silicon: evolution of micro-nano structures and damage investigation[J]. Materials & Design, 2023. （SCI，IF=8.8）
Direct laser irradiaton and modification of 2D te for development of volatile memristor[J]. Materials, 2023.（SCI，IF=3.4）
Design of a Reflective Metasurface with Broadband Low Detectability on 3-D Targets. 2023 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science.(顶级会议，EI)
One step femtosecond laser-induced monocrystalline silicon structure towards enhanced nano-hardness[J]. Materials Letters, 2022. (SCI, IF=3.574)
Femtosecond laser induced one-step nanopatterning and preparation of rGO/RuO2 electrodes for high-performance micro-supercapacitors[J]. Journal of Electroanalytical Chemistry, 2022. (SCI, IF=4.598)
Research on monocrystalline silicon structures irradiated by femtosecond laser at sub-micron scale[J]. Materials. 2022. (SCI, IF=3.748)
Numerical and experimental research on the laser-water jet scribing of silicon[J]. Applied Science, 2022, 12: 4057.(SCI, IF=2.838)
The realization of ZnO nanowires interconnection through femtosecond laser irradiation of Ag nanoparticles solder[J]. 2022, 12: 1004. (SCI, IF=2.838)
Theoretical and experimental investigation on SiC/SiC ceramic matrix composites machining with laser water jet[J]. Applied Science, 2022, 12: 1214.(SCI, IF=2.838)
Insights into the surface responses of graphene oxide irradiated by an infrared femtosecond laser[J]. Journal of Physics D: Applied Physics, 2022, 55: 135101. (SCI, IF=3.409)
水导激光微加工机理与研究进展[J]. 中国激光, 2022, 49(10): 1002002.(EI检索)
飞秒激光直写制备LIG/RuO2复合电极[J]. 中国激光, 2022, 49(16). (EI检索)
Periodic nanopatterning and reduction of graphene oxide by femtosecond laser to construct high-performance micro-supercapacitors[J]. Carbon, 2021, 172:144-153. (SCI, IF=11.307)
An environmentally friendly laser cleaning method to remove oceanic micro-biofoulings from AH36 steel substrate and corrosion protection[J]. Journal of Cleaner Production, 2021, 314: 127961. (SCI, IF=11.072)
Coaxial helical gas assisted laser water jet machining of SiC/SiC ceramic matrix composites[J]. Journal of Materials Processing Technology, 2021, 293: 117067.(SCI, IF=6.162)
Research and progress of laser cladding on engineering alloys : a review[J]. Journal of Manufacturing Processes, 2021. (SCI, IF=5.684，ESI高被引论文)
A characterization of laser cleaning painting layer from steel surface based on theremodynamic model[J]. The International Journal of Advanced Manufacturing Technology, 2021. (SCI, IF=3.563)
Simulation and fabrication of carbon nanotube-nanoparticle interconnected structures[J]. Mechanical Sciences, 2021. (SCI, IF=1.386)
纳米操作技术研究及应用进展[J]. 中国激光, 2021. (EI检索)
飞秒激光辐照氧化石墨烯的纳结构与电化学性能研究[J]. 中国激光, 2021. (EI检索)
超快激光在无源光波导器件制造中的应用综述[J]. 中国激光, 2021. (EI检索)
水导激光加工光源选型与材料蚀除研究[J]. 北京理工大学学报, 2021. (EI检索)
基于纳米操作的纳米线钎焊结构组装及互连[J]. 中国激光, 2021. (EI检索)
Investigation on the crack propagation behavior and edge quality in laser dicing of glass-anisotropic silicon double-layer wafer[J]. Journal of Materials Processing Technology, 2020, 275: 116356.(SCI, IF=6.162)
Continuous-wave laser-enhanced pulsed-laser ablation[J]. National Science Review, 2019, 6:5-7.( SCI, IF=17.275)
Laser composite manufacturing technology[C]. The 10th Japan-China-Korea Joint Conference on MEMS/NEMS, 2019. (大会报告)
激光加工在线监测技术研究进展[J]. 中国科学: 物理学 力学 天文学, 2019, 49(4): 60-78. (中文核心)
Continuous-wave laser-enhanced pulsed-laser ablation[J]. National Science Review, 2019, 6:5-7.(SCI, IF=23.178)
Investigations on femtosecond laser modified micro-textured surface with anti-friction property on GCr15[J]. Applied Surface Science, 2018, 434: 831-842. (SCI, IF=7.392)
Enhancement of pulsed laser ablation assisted with continuous wave laser irradiation[J]. Science China Physics, Mechanics & Astronomy, 2018, 62(3): 34211. (SCI, IF=5.203)
Investigations on femtosecond laser-modified microgroove-textured cemented carbide YT15 with promotion in cutting performance[J]. The International Journal of Advanced Manufacturing Technology, 2018, 96: 4367-4379. (SCI, IF=3.563)
Enhancement of nanosecond laser shock peening assisted by continuous wave laser irradiation[C]. The 7th International Conference on Laser Shocking Peening and Related Phenomena, 2018. (大会报告)
Numerical and experimental investigations on 342nm femtosecond laser ablation of K24 superalloy[J]. Journal of Materials Processing Technology, 2017, 249: 14-24.(SCI, IF=6.162)
Numerical simulation and experimental research on reduction of taper and HAZ during laser drilling using moving focal point[J]. The International Journal of Advanced Manufacturing Technology, 2017, 91: 1171-1180. (SCI, IF=3.563)
Experimental Research on Millisecond Laser Combined with Electrochemical Jet Machining[C]. The 6th International Conference of Asian Society for Precision Engineering and Nanotechnology, 2015. (大会报告)
学术兼职
学术组织：
中国机械工程学会高级会员
中国光学工程学会会员
期刊审稿专家 ( SCI )：
Journal of Nanobiotechnology
Internaltional Journal of Machine tools and Manufacture
Applied Surface Science
Journal of Materials Processing Technoloy
Ceramics International
Journal of Manufacturing Processes
Composites Part B
IEEE Transactions on Instrumentation & Measurement
Science China
The International Journal of Advanced Manufacturing Technology
Mechanical Sciences
中国激光
光子学报
机械工程学报
光学精密工程
红外与激光工程
......
学术论坛：
十二校联合机械工程研究生学术论坛评委
京公网安备 11010802027423号