金天国 - 哈尔滨工业大学

个人简介

男，满族，1968年生，博士，副教授；哈尔滨工业大学机电工程学院机电控制及自动化系；主要从事智能制造与工业软件方面的研究。编著《CAD/CAM集成技术》，主持国家基础科研项目3项，国家自然基金项目1项，973项目子项1项，部级项目2项。“基于虚实映射的制造工艺智能设计与执行控制方法研究”获黑龙江省科学技术二等奖。发表论文30余篇，专利和软著6项。获奖情况参编的《CAD/CAM集成技术》，2001年，获首届国防科技工业优秀图书奖 “基于虚实映射的制造工艺智能设计与执行控制方法研究”2019年获黑龙江省自然科学进步二等奖（排名第二）

研究领域

多机器人运行环境重构与智能规划控制技术复合材料产品数字化集成制造技术

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Bo Yang, Tianguo Jin, Fengyang Bi, Yajun Wei, Jianguang Li. Influence of fabric shear and flow direction on void formation during resin transfer molding. Composites Part A: Applied Science and Manufacturing, 2015, 68:10-18. [SCI 收录, IF=3.012] Bo Yang, Tianguo Jin, Jianguang Li, Fengyang Bi. Simulation prediction of the preform deformation and resin flow in vacuum infusion process. Polymer Composites, 2014, 35: 1968-1979. [SCI 收录,IF=1.455] Bo Yang, Tianguo Jin, Jianguang Li, Fengyang Bi. Three- dimensional numerical simulation of mold filling process in compression resin transfer molding. Applied Composite Materials, 2014, DOI:10.1007/s10443-014- 9402-7. [SCI 收录, IF=1.29] Bo Yang, Tianguo Jin, Jianguang Li, Feng Bi. Simulating the resin flow and stress distributions on mould tools during compression resin transfer molding. Journal of Reinforced Plastics and Composites, 2014, 33(14):1316-1331. [SCI 收录, IF=1.188] Bo Yang, Tianguo Jin, Jianguang Li, Fengyang Bi. Modeling the resin flow and numerical simulation of the filling stage for vacuum-assisted resin infusion process. Journal of Reinforced Plastics andComposites, 2014, 33(21): 1976-1992. [SCI 收录, IF=1.188] Bo Yang, Tianguo Jin, Jianguang Li, Fengyang Bi. A Novel Fishnet Algorithm for Woven FabricDraping based on Geometry Information. Materials Science- Medziagotyra, 2014, 20(4):513-521. [SCI收录，IF=0.455] Bo Yang, Tianguo Jin. Micro-geometry modeling based on Monte Carlo and permeability prediction ofyarn. Polymer and Polymer Composites, 2014, 22(3): 253-260. [SCI 收录, IF=0.255] Feng-yang Bi, Tian-guo Jin, Gao-liang Peng, Wen-jian Liu. A Rapid Design and Design KnowledgeManagement System for Mould of Autoclave Forming Resin Matrix Composite Components. Polymers& Polymer Composites, 2012, 20(1): 193~200. [SCI 收录, IF=0.255] 金天国, 杨波, 李建广, 毕凤阳. 基于多相流的LCM 工艺气泡生成仿真研究. 复合材料学报. 2014,31(3): 725-732. [EI 收录] 金天国, 魏雅君, 杨波, 毕凤阳. 预成型体渗透率预测以及压缩变形的影响. 复合材料学报, 2014. [EI收录] Jin Tianguo, Bi Fengyang. A Computer-aided Design System for Framed-mould in Autoclave Processing. International Journal of Automation and Computing. 2010,7(3):261~270. [EI 收录] 杨波, 金天国, 郑龙. 微-细双尺度单胞下织物预成型体渗透率预测. 复合材料学报, 2013, 30(5):209-217. [EI 收录] 杨波, 金天国, 毕凤阳, 王涛. 基于曲面信息的平面织物铺覆改进渔网算法.复合材料学报, 2014,31(1): 227-233. [EI 收录] 杨波, 金天国, 王胜龙. 复合材料游艇艇体真空导入成型工艺浇注系统优化研究. 中国造船, 2013,54(1):213-221. [EI 收录] 杨波, 金天国, 毕凤阳, 李建广.预成形体渗透率预测及剪切变形的影响. 材料工程, 2014, 11: 7-14.[EI 收录] Bo Yang, Tianguo Jin, Shenglong Wang. Simulation Optimization of the Filling Process of VacuumInfusion Molding Process for Composite Yacht Hull. 2nd International Conference on Electronic &Mechanical Engineering and Information Technology (EMEIT-2012), 2012, 940-944. [EI 收录] Zhang Xutang, Jin Tianguo, Hou Xin, Zuo Wangmeng, Wang Kuanquan. Multi-step 3D engineeringmodels retrieval based on shape statistical information. Journal of Harbin Institute of Technology (NewSeries).2010,17(1):232~235. [EI 收录] 毕凤阳, 杨波, 金天国, 刘文剑. 基于模具预先补偿法的大幅面CFRP 制件形状精度控制方法. 复合材料学报, 2014, DOI: 10.13801/j.cnki.fhclxb. 20140605.002. [EI 收录] 毕凤阳, 杨波, 金天国, 张旭堂, 彭高亮, 刘文剑. 树脂基复合材料热压罐成型工艺固化变形模拟. 兵器材料科学与工程, 2014, 37(4): 20-25. 金天国，张旭堂，姚娜. 复合材料RTM工艺过程的监测系统,中国科技大学学报，2009 增刊,vol39：157~160. [EI 收录] 姜洋，金天国，刘文剑，徐杰. 基于本体的复杂产品设计知识优化集成，计算机集成制造系统,2010,16(9):1828~1835. [EI 收录] 郭宁，金天国，刘文剑. 基于虚拟制造单元的制造资源组织模型，计算机集成制造系统,2010,16(8):1649~1656. [EI 收录] 姜洋，金天国，刘文剑. 网络化协同制造环境下的混合访问控制模型，计算机集成制造系统,2009,15(7):1279~1285. [EI 收录]