近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Wang Hongxiang，Li Dan，Dong Shen .A surface roughness model for ultraprecision turning aluminium alloy with a single diamond tool. Chinese Journal of Mechanical Engineering.2002，(2)：153-156
Wang Hongxiang，Sun Tao，Dong Shen. Tool force model for diamond turning. Chinese Journal of Mechanical Engineering.2004，(1):145-148
Wang Hongxiang，Zong Wenjun，Li Dan，Dong Shen. Feed rate and depth of cut influence on cutting forces in diamond turning aluminium alloy. Materials Science Forum. 2004，(9)
Wang Hongxiang，Zong Wenjun，Liang Yingchun，Dong Shen. Tool geometry effect on machined surface integrity in precision turning high-strength spring steel. Materials Science Forum. 2004，(9)
Wang Hongxiang，Wang Bo，Dong Shen. FE Simulation of Diamond Turning with Different Friction Coefficients. Key Engineering Materails.2007.03
Wang Hongxiang, Zong Wenjun, Sun Tao, Liu Qing. Modification of three dimensional topography of the machined KDP crystal surface using wavelet analysis method. Applied Surface science. 2010, 256 (16): 5061-5068
H.X.Wang, Xu. Zhang, W.S. Zhang. Finite Element Numerical Simulation of EDM Surface Strengthening in Gas medium of Stainless Steel 1Cr13. Advanced Materials Research. 2010, 136:189-193
H.X.Wang, J.H. Wang, S.Dong. Nanoindentation size effect of KDP crystal by instrumented indentation testing. Key Engineering Materials. 2008, 364-366: 188-192
Wang Jing-he, Wang Hong-xiang, XU Zong-wei. Theoretical Analysis and Experiment Study of Carbon Nanotube Probe and Conventional Atomic Force Microscopy Probe on Surface Characterization. Chinese Journal of Mechanical Engineering. 2008, 21 (5) :62-64
Wang Hongxiang,Yang Jia. Research on milling force in precision milling SiCp/AL composite material.Journal of Harbin Institute of Technology.2012,19(5):1-5
Lv Dongxi,Wang Hongxiang. Surface observations and material removal mechanisms in rotary ultrasonic machining of brittle material.Journal of Engineering Manufacture.2012,226(9):1479-1488
W.S. Zhang, H.X. Wang, H.Du and Tao.Xu. The optimization of precision milling parameters for titanium based on genetic algorithm. Advanced Materials Research.2012,472-475:1078-1081
Dongxi Lv，Hongxiang Wang，Yongjian Tang，et al. Influences of Vibration on Surface Formation in Rotary Ultrasonic Machining of Glass BK7. Precision Engineering, 2013, 37(4): 839-848
Dongxi Lv，Yanhua Huang，Hongxiang Wang，et al. Improvement Effects of Vibration on Cutting Force in Rotary Ultrasonic Machining of BK7 Glass.Journal of Materials Processing Technology, 2013, 213(9): 1548-1557
Dongxi Lv，Yanhua Huang，Yongjian Tang，Hongxiang Wang，et al. Relationship between subsurface damage and surface roughness of glass BK7 in rotary ultrasonic machining and conventional grinding processes. The International Journal of Advanced Manufacturing Technology, 2013, 67(1-4): 613-622
Dongxi Lv，Yongjian Tang，Hongxiang Wang，et al. Experimental Investigations of subsurface damage in rotary ultrasonic machining of glass BK7. Machining Science and Technology, 2013, 17(3): 443-463
Wang Hong-xiang, Tang Ya-bin, Liu Zhan-shan, Gao Shin. Machining deformation prediction of thin-walled structural part based on finite element analysis.Journal of Harbin Institute of Technology(New Series),2015,22(2):9-16
Chu Wang, Hongxiang Wang, Lu Shen, Jing Hou, Qiao Xu, Jian Wang, Xianhua Chen.Numerical simulation and experimental study on crack self-healing in BK7 Glass.Ceramics International, 2018,44:1850–1858
Wang Hongxiang, Hou Jing, Wang Jing-he. Experimental investigation of subsurface damage depth of lapped optics by fluorescent method. Journal of Central South University,2018,25:1678-1689
Chu Wang, Hongxiang Wang, Lu Shen.Effect of temperature on surface error and laser damage threshold for self-healing BK7 glass. Applied Optics,2018,57(9):2025-2032
Hongxiang Wang, Chu Wang, Mingzhuang Zhang, Ermeng Zheng, Jing Hou, Xianhua Chen. Investigation of subsurface damage density and morphology impact on the laser-induced damage threshold of fused silica. Applied Optics, 2019,58(36):9839-9845
Shiwei Liu, Hongxiang Wang, Qinghua Zhang, Jing Hou, Bo Zhong. Regionalized modeling approach of toolinfluence function in magnetorheological finishing process for aspherical optics. Optik, 2020,206:164368
Chu Wang, Hongxiang Wang, Zhichao Liu, Mingzhuang Zhang, Rui Gao, Jing Hou, Xianhua Chen. Kinetic model and effect of surface impurities on the crack healing of BK7 glass. Ceramics International, 2020,46:19069-19077
Chu Wang, Hongxiang Wang, Rui Gao, Mingzhuang Zhang, Shiwei Liu, Jing Hou. Experimental investigation on thermal healing of subsurface damage in borosilicate glass. Ceramics International, 2021, 47:17128-17138
Shi-Wei Liu, Hong-Xiang Wang, Qing-Hua Zhang, Jing Hou, Xian-Hua Chen, Qiao Xu, Chu Wang. Smoothing process of conformal vibration polishing for mid-spatial frequency errors: characteristics research and guiding prediction. Applied Optics, 2021,60(13):3925-3935
王洪祥, 董小瑛, 董申. 超精密车削表面微观形貌形成机理的研究. 哈尔滨工业大学学报.2002，(4):509-513
王洪祥, 王景贺, 孙涛. 磷酸二氢钾晶体超精密加工存在的若干问题分析. 兵工学报. 2006.05
王洪祥, 王景贺, 马恩财. KDP晶体超精密加工表面硬度压痕尺寸效应的研究. 哈尔滨工业大学学报. 2006.06
王洪祥, 马恩财, 高石. 磷酸二氢钾（KDP）晶体纳米压痕过程的有限元分析. 材料科学与工艺. 2009, 17(1): 40-42
王洪祥, 高石, 黄志群, 王健, 侯晶. KDP晶体超精密切削过程中等效应力和应变分析. 材料科学与工艺. 2008, 16 (3):326-329
王洪祥, 郭健, 王健, 陈贤华. KDP晶体各向异性对切削力的影响研究. 工具技术. 2008, 42(6):3-5
王洪祥, 徐涛. 铝合金精密铣削有限元仿真的参数化建模. 轻合金加工技术.2011, 139(12):51-54
王洪祥, 张旭.1Cr13不锈钢电火花表面强化层摩擦磨损性能研究. 材料科学与工艺. 2011, 19(3):56-59
王洪祥, 杨嘉.铝基碳化硅精密铣削刀具磨损实验研究. 材料科学与工艺. 2012, 20(5): 12-15
王洪祥, 徐涛, 杨嘉. 航空钛合金铣削过程有限元数值模拟. 机械传动. 2012,36(2):33-36
王洪祥, 吕东喜. 大型发电机定子弹簧板等效弹性模量计算方法. 机械设计. 2012,29(12):19-23
吕东喜, 王洪祥, 唐永健等. 旋转超声加工中磨粒冲击作用的仿真分析. 哈尔滨工业大学学报, 2013, 45(1): 682-687
吕东喜, 王洪祥, 黄燕华等. 光学材料磨削的亚表层损伤预测. 光学精密工程. 2013, 21(3): 2472-2478
候晶, 王洪祥等. 高功率激光晶体加工技术的研究.强激光与粒子束.2014, 26(7):0720101-5
王洪祥,李成福, 朱本温等. 光学元件亚表面缺陷的损伤性检测方法. 强激光与粒子束. 2014, 26(12):1200001-5
王洪祥,朱本温,陈贤华等. 抛光工艺参数对熔石英元件低频面形精度的影响.强激光与粒子束. 2015,27(3):030000-1-5
王洪祥, 侯晶, 严志龙等. 熔石英元件抛光加工表面残余应力的计算方法.哈尔滨工业大学学报. 2015,47(5):20-24
王洪祥,王景贺,严志龙. 光学元件亚表层裂纹成核临界条件研究, 强激光与粒子束，2016,28(4):040000-1-5
侯晶,王洪祥,陈贤华,谢瑞清,邓文辉,唐才学. 大口径平面光学元件的磁流变加工，光学精密工程, 2016，24(12):3054-3060
王洪祥,王景贺,严志龙. 光学元件亚表层裂纹成核临界条件研究, 强激光与粒子束，2016,28(4):040000-1-5
王洪祥,沈璐,李成福,白桦, 周岩. 光学元件激光诱导损伤分析及实验研究, 中国激光，2017,44(3):0302006-1-7
王洪祥,严志龙,王景贺,周岩,白桦. 光学元件研磨加工裂纹形成过程数值模拟,哈尔滨工业大学学报. 2017,49(7):52-56
京公网安备 11010802027423号