当前位置: X-MOL首页全球导师 国内导师 › 刘俊岩

个人简介

刘俊岩,1978年12月生,黑龙江海伦人,哈尔滨工业大学机电工程学院航空宇航制造工程系副主任,教授/博士生导师,机器人技术与系统国家重点实验室固定成员,加拿大多伦多大学访问学者,比利时鲁汶大学高级访问学者。现任中国机械工程学会高级会员,中国光学工程学会委员、第十、十一届全国无损检测学会委员(理事),第十届新技术检测专业委员会委员、第十一届新技术交流大会副主席(新技术检测专业委员会副主任委员)、定量红外成像(亚洲)QIRT-Aisa学术委员会委员,第16届全国无损检测新技术交流会大会主席,第4届QIRT-Aisa 2021大会主席。面向航空航天新材料、新结构、半导体材料与器件及医学诊断等领域应用的检测新方法/新技术和航天特种材料/结构极限化制造的需求,主要开展光热科学探测、红外热波成像与视觉智能检测、半导体光电诊断、空间在轨检测与维修、金属激光精细增材制造及增/减材混合制造等研究。承担和参与了国家自然科学基金、国家部委重点项目、国家科技重大专项、国家863计划、国家重点研发、黑龙江省重点应用研发计划及横向项目30余项,累计科研经费5000余万元。共发表学术论文150余篇(SCI论文90余篇、EI收录近40篇),获全国无损检测年会优秀论文奖1项、FENDT矩阵科技论文奖1项,国际光声光热现象大会及论坛特邀报告3次、国际定量红外成像会议(亚洲)邀请报告1次。获黑龙江省自然科学二等奖2项、黑龙江省高校科学技术一等奖、二等奖各1项,授权发明专利20项、软件著作权24项,参编教材和专著2部,参与编写国家标准1项。 工作经历 2016.01-至今 哈尔滨工业大学/机电工程学院 教授 2019.08~2019.09 比利时鲁汶大学/应用物理系 高访学者 2018.08~2018.09 加拿大多伦多大学/机械与工业工程系 高访学者 2012.05~2013.05 加拿大多伦多大学/机械与工业工程系 访问学者 2009.01~2015.12 哈尔滨工业大学/机电工程学院 副教授 2006.09~2009.07 哈尔滨工业大学/仪器科学与技术博士后流动站 博士后 2006.06~2008.12 哈尔滨工业大学/机电工程学院 讲师

研究领域

光热科学与探测技术 开展基于光热效应的材料特性/组织结构表征与评价技术研究。主要包括:光热科学理论与仿真、先进信号处理方法、光热效应与探测技术(PTR —光热辐射探测;PA/PAS —光声与光声谱探测;MOR—调制光反射探测)、半透明介质热物性测量新方法及超分辨光热显微成像与探测。 红外热波成像与视觉智能检测 开展光、声等物理场作用固体材料的热效应、时域与空域调控热波扩散的基础问题和红外热波成像智能无损检测与评价技术研究。主要包括:热传导理论与仿真、热波信号处理与分析、图像处理与智能识别、红外热波成像探测方法(PT—红外脉冲热波成像检测;LIT—红外锁相热波成像检测;UTWI—超声红外热波成像检测;TWRI—红外雷达热波成像检测;TWCT—红外热波CT层析成像检测;3DTWI—3D光学与红外热波融合成像检测)、电子器件封装质量红外热像诊断、结构应力与疲劳特性红外热像分析技术及生物工程/医学领域的光热成像检测新应用等; 半导体光电无损诊断 开展半导体晶圆、太阳能电池光电特性的光学检测与诊断技术。主要包括:载流子输运理论与仿真、载流子辐射复合机制、吸收光子能量损耗与发热机制、载流子传输参数的光学检测、半导体/太阳能电池光电性能红外锁相发光/热波成像探测及空间太阳能电池辐照损伤机制与性能衰退评价等; 金属激光精细增材制造与增/减材复合制造 激光烧结增材制造,选区激光融化及其检测控制,涉及激光增材制造,多种检测手段,及深度学习相关方向。开展激光粉床与熔覆增材制造理论与技术研究。主要包括:金属增材制造成形过程仿真、金属增材制造在线监控与成形缺陷无损检测、激光选区熔化墨水打印金属纳米介质增材制造、增/减材复合制造方法与工艺及增材制造成形性能强化技术等; 空间在轨检测与维修技术 开展空间环境的在轨飞行器损伤检测与维修技术。主要包括:空间光学环境与在轨光学检测、空间热环境与在轨红外探测、空间在轨激光扫描检测方法与策略及空间在轨制造技术等。

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

Jiacheng Wei, Yu He, Fei Wang*, Yuyu He, Xiaoxu Rong, Mingjun Chen, Yang Wang, Honghao Yue, Junyan Liu*, Convolutional neural network assisted infrared imaging technology: an enhanced online processing state monitoring method for laser powder bed fusion[J]. Infrared Physics and Technology, 2023. Yonghui Wang, Fei Wang, Peng Song, Junyan Liu*, Resolution Improvement of Photothermal Microscopy by Modulated Difference Method[J]. Optics letters, 2023 Yu He, Jiacheng Wei, Yuyu He, Xiaoxu Rong, Wenfeng Guo, Fei Wang*, Yang Wang, Junyan Liu*, Additive-subtractive hybrid manufacturing; Process planning; Decision-making; Manufacturability evaluation[J]. Journal of Manufacturing Systems, 2023 Xianglin Meng, Fei Wang*, Zhipeng Liang, Xuan Zhang, Jiexin Weng, Zhijie Li, Junyan Liu*, Mingjun Chen, Yang Wang, Honghao Yue, Research on the detection of silica/phenolic composite surface cracks using instantaneous high-power xenon lamp-induced chirp-pulsed radar thermography[J], Measurement, 2023, 209: 112494. Fei Wang, Yihao Zhou, Xuan Zhang, Zhijie Li, Jiexin Weng, Guiyan Qiang, Mingjun Chen, Yang Wang, Honghao Yue, Junyan Liu*, Laser-induced thermography: An effective detection approach for multiple-type defects of printed circuit boards (PCBs) multilayer complex structure[J], Measurement, 2023, 206: 112307. 王飞,史倩竹,高明宇,刘俊岩*,徐丽霞,刘丽霞,王扬,陈明君,岳洪浩。C/GFRP层板冲击损伤红外脉冲雷达热波成像检测技术研究 [J]. 航空科学技术, 2023(03), ACCEPT Wei Li, Xueyan Zhu, Xiaochun Wang*, Fei Wang*, Junyan Liu*, Mingjun Chen, Yang Wang, Honghao Yue, Segmentation and Accurate Identification of Large Carious Lesions on high quality X-Rays Images Based on Attentional U-Net Model. A Proof of Concept Study[J]. Journal of Applied Physics, 2022, 132: 033103. 王飞,岳卓言,刘俊岩*,徐丽霞,刘丽霞,王扬,陈明君,岳洪浩,碳环氧蒙皮铝蜂窝夹心结构缺陷红外热波成像检测研究[J].航天制造技术, 2022, 6(3): 6-11. Peng Song, Junyan Liu*, Lixia Liu, Fei Wang, Xiaogang Sun, Zhanjie Liu, Lixia Liu, Contactless inspection of CFRP artificial disbonds using combined laser thermography and laser ultrasonics with optical microphone[J]. Composite Structure, 2022, 294(4):115971 Xiaoxu Rong, Jianghao Zhao, Zhuoyan Yue, Fei Wang*, Junyan Liu*, Yong Zhang, Guiyan Qiang, Jingxiang Sun, Jiacheng Wei, Yang Wang, Mingjun Chen, Honghao Yue, Rapid detection for the surface and hidden crack of solid propellant motor charge using laser arrays scanning thermography(LAsST) [J]. Infrared Physics and Technology, 2022, 125: 104321. Xianglin Meng, Fei Wang*, Junyan Liu*, Mingjun Chen, Yang Wang, Phase shifting profilometry based on Hilbert transform: An efficient phase unwrapping algorithm [J]. Journal of Applied Physics 2022, 131: 193104.. (ACCEPT, Q2, IF=2.546) Mingyu Gao, Fei Wang*, Junyan Liu*, Peng Song, Jianfeng Chen, Hong Yang, Hongbo Mu, Dawei Qi, Mingjun Chen, Yang Wang, Honghao Yue, Estimation of the convolutional neural network with attention mechanism and transfer learning on wood knot defect classification[J]. Journal of Applied Physics (2022). (ACCEPT, Q2, IF=2.546) Fei Wang, Zhuoyan Yue, Junyan Liu*, Hong Qi, Wenjun Sun, Mingjun Chen, Yang Wang, Honghao Yue, Quantitative Imaging of Printed Circuit Board (PCB) Delamination Defects Using Laser-induced Ultrasound Scanning Imaging[J]. Journal of Applied Physics, 131, 053101(2022). (Q2, IF=2.546) Yonghui Wang, Fei Wang, Junyan Liu*, Mingjun Chen, Yang Wang, Simulations and Experimental Study of Individual Au Nanoparticle Using Photothermal Heterodyne Imaging (PHI) [J]. IEEE Transactions on Instrumentation and measurement, 2021, ACCEPT.(Q1, IF=4.016) Fei Wang, Lianjun Wu, Xiaochun Wang, Yuming Liang, Junyan Liu*, Mingjun Chen, Yang Wang, Accurate identification and detection of occlusal / smooth early caries using thermal-wave radar imaging (TWRI) technique under low temperature rising condition[J], Measurement, 2021, 110517.(Q1, IF=3.927) Yang Liu, T. Seresini, Junyan Liu*. All-optical dynamic analysis of the photothermal and photoacoustic response of a microcantilever by laser Doppler vibrometry [J]. Photoacoustics, 2021, 24:100299. (SCI, Q1,IF: 8.484). Yang Liu, Fei Wang, Junyan Liu*, Quantification of Proton Radiation Damage in Polyimide Aerogel by Cantilever-enhanced Photoacoustic Spectroscopy, [J]. IEEE Transactions on Instrumentation and measurement, 2021, ACCEPT.(SCI, Q1,IF: 4.016). Fei Wang, Junyan Liu*, Lixia Liu, et al. Quantitative non-destructive evaluation of CFRP delamination defect using laser induced chirp-pulsed radar photothermal tomography, Optics and Laser in Engineering, 2022, 149:106830.(SCI, Q1, IF: 4.836). Peng Song,Junyan Liu*, Fei Wang, et al. The study of inspection on thin film resistance strain gauge contact failure by electrical excitation thermal-wave imaging[J]. IEEE Transactions on Industrial Electronics, 2021. (SCI, Q1, IF=8.236) Fei Wang, Junyan Liu*, Boyuan Dong, Guobin Liu, Mingjun Chen, Yang Wang. Optimization of Thermal-Wave Radar Thermography by Transverse Heat Flow Suppression Technique for Accurate Defect Detection of CFRP Laminates [J]. IEEE Transactions on Instrumentation and measurement, 2021, 70:1-10(SCI, Q1, IF=4.016) Jinlong Gong, Junyan Liu*, Reliability assessment for time-slice enhanced bidirectional thermal wave radar thermogrpahy of hybrid C/GFRP defect, IEEE Transcations on Industrial informatics, 2021, 17(9):6094-6103(SCI, Q1, IF=10.215) Junyan Liu*, Dong Boyuan, Wang Fei, et.al., Study on cracks defect inspection for GFRP laminates using laser excitation chirp pulsed photothermal radar imaging (CP-PRI), Infrared Physics & Technology, 2021, 114: 103689(SCI, Q2, IF=2.638) Dong Boyuan, Wang Fei, Song Peng, Liu Yang, Wang Yonghui, Wei Jiacheng, Junyan Liu*, et.al., Detection on the coating peeling of SiC coated C/C composites using infrared thermal-wave tomography, Infrared Physics & Technology, 2021, 114: 103462(SCI,Q2, IF=2.638) Fei Wang, Junyan Liu*, Peng Song et.al., Multimodal optical excitation pulsed thermography: Enhanced recognize debonding defects of the solid propellant rocket motor cladding layer, Mechanical Systems and Signal Processing, 2022, 163:108164(SCI, Q1, IF=6.823) Fei Wang, Junyan Liu*, Boyuan Dong, et.al. Blind image separation for the debonding defects recognition of the solid propellant rocket motor cladding layer using pulse thermography, Measurement, 2021, 174:108997(SCI, Q1, IF=3.927) Jinlong Gong, Junyan Liu*, Multi-characteristic combination based reliability enhancement of optical bidirectional thermal wave radar imaging for GFRP laminates with subsurface defects, NDT&E Int., 2021,119:102415(SCI, IF=3.739) Mingyu Gao, Peng Song, Wang Fei, Junyan Liu, Andreas Mandelis, Dawei Qi. A Novel Deep Convolutional Neural Network Based on ResNet-18 and Transfer Learning for Detection of Wood Knot Defects [J]. Journal of sensors, 2021, 4428964:1-16.(SCI, IF=2.137) Mingyu Gao, Wang Fei, Peng Song, Junyan Liu, Dawei Qi. BLNN: Multiscale Feature Fusion-Based Bilinear Fine-Grained Convolutional Neural Network for Image Classification of Wood Knot Defects [J]. Journal of sensors, 2021, 8109496:1-18.(SCI, IF=2.137) Gong J. L, Zheng Y, Junyan Liu*, A study on the SNR performance analysis of laser-generated bidirectional thermal wave radar imaging inspection for hybrid C/GFRP laminate defects, Infrared Physics & Technology, 2020, 111: 103526(SCI,Q2, IF=2.638) Fei Wang, Yonghui Wang, Junyan Liu*, Yang Wang, The Feature Recognition of CFRP Subsurface Defects Using Low Energy Chirp-Pulsed Radar Thermography, IEEE Transcations on Industrial informatics, 2020, 16(8):5160-5168(SCI, Q1, IF=10.215) Yu He, Jiacheng Wei, Junyan Liu*, Yang Wang, Lin He, Experimental study on the fabrication profile and mechanical properties by substrate-inclined angle using laser melting deposition (LMD) integrating with the substrate of stainless steel, Optics and Laser Technology, 2020, 125: 106038(SCI, Q2, IF=3.867) Jiacheng Wei, Fei Wang, Junyan Liu*, Yang Wang, Lin He, The Inspection of CFRP Laminate with Subsurface Defects by Laser Arrays Scanning Thermography (LAsST), Int. J. Thermophysics, 2020,41:60(SCI, Q4, IF=1.608) Jiacheng Wei, Fei Wang, Junyan Liu*, Yang Wang, Lin He, A laser arrays scan thermography (LAsST) for the rapid inspection of CFRP composite with subsurface defects, Composite Structures, 2019,226:111201-8 Peng Song, Peng Xiao, Junyan Liu*, Yonghui Wang, The inspection of coating thickness uniformity of SiC-coated carboncarbon (C/C) composites by laser-induced thermal-wave imaging, Carbon, 147 (2019): 348-356 Junyan Liu*, Yang Liu, You Wu, Yang Wang, Characterization of ion radiation-induced damage in polyimide by wavelength-scanning and dual-wavelength laser photoacoustic spectroscopy, Polymer, 165 (2019) :55-60 Maolu Wang, Xingjian Wang, Junyan Liu*, Jiacheng Wei, Zhangwen Shen, Yang Wang, 3-Dimensional ink printing of friction-reducing surface textures from copper nanoparticles, Surface & Coatings Technology, 364(2019):57-62 Xianglin Meng, Yonghui Wang, Junyan Liu*, Wantao He, Nondestructive inspection of curved clad composites with subsurface defects by combination active thermography and three-dimensional (3D) structural optical imaging, Infrared Physics & Technology, 97(2019): 424–431 Qianzhu Shi, Junyan Liu*, Wanyu Liu, Fei Wang, Yang Wang, Barker-coded modulation laser thermography for CFRP laminates delamination detection, Infrared Physics & Technology, 98(2019): 55–61 Song Peng, A. Melnikov, A. Mandelis*, Sun Q. M, Junyan Liu*, Uniqueness range optimization of photocarrier transport parameter measurements using combined quantitative heterodyne lock-in carrierography imaging and photocarrier radiometry, Journal of Applied Physics, 125, 065701,(2019) Song Peng, A. Melnikov, A. Mandelis, Sun Q. M, Junyan Liu*, Contactless non-destructive imaging of doping density and electrical resistivity of semiconductor Si wafers using lock-in carrierography, Semicond. Sci. Technol. 33 (2018) 12LT01 (6pp) Wang Fei, Wang Yonghui, Junyan Liu*, Optical excitation fractional Fourier transform (FrFT) based enhanced thermal-wave radar imaging (TWRI), Optics Express, 2018, 26(17):21403-21417 Song Peng, Junyan Liu*, Xu Hongtu, Wang Yang, Carrier Transport Parameter Imaging in a Multicrystalline Silicon Solar Cell by Laser-Induced Photocarrier Radiometry, Int. J. Thermophysics, 2018,39:119 Song Peng, Junyan Liu*, Xu Hongtu, Wang Yang, Quantitative Analysis of the Degradation Behavior of Silicon Solar Cell Irradiated by 1 MeV Electron Beams Using Photocarrier Radiometry Combined with Lock-in Carrierography, Int. J. Thermophysics, 2018,39:128 Shi Qianzhu, Junyan Liu*, Liu Wanyu, Wang Yang, Study on the Detection of CFRP Material with Subsurface Defects Using Barker-Coded Thermal Wave Imaging (BC-TWI) as a Nondestructive Inspection (NDI) Tool, Int. J. Thermophysics, 2018,39:92 Wang Fei, Wang Yonghui, Junyan Liu*, Independent component analysis enhanced pulse thermography for high silicon oxygen phenolic resin (HSOPR) sheet with subsurface defects, Infrared Physics & Technology, 2018, 89: 64–71 Wang Fei, Junyan Liu*, Wang Xiaochun, Wang Yang, Experimental investigation on the caries characteristic of dental tissues by photothermal radiometry scanning imaging, Infrared Physics & Technology, 2018, 89: 64–71 Wei Peng, Fei Wang, Junyan Liu*, Peng Xiao, Yang Wang, Jing-min Dai, Pulse Phase Dynamic Thermal Tomography Investigation on the Defects of the Solid-Propellant Missile Engine Cladding Layer, Int. J. Thermophysics, 2018,39:48 Wang Fei, Junyan Liu*, Md. Oliullah, Wang Yang, Experimental Study on GFRP Surface Cracks Detection Using Truncated-Correlation Photothermal Coherence Tomography, Int. J. Thermophysics, 2018,39:49 Wang Fei, Junyan Liu*, Md. Oliullah, Wang Yang, Research on Debonding Defects in Thermal Barrier Coatings Structure by Thermal-wave Radar Imaging (TWRI), Int. J. Thermophysics, 2018,39:71 Md. Oliullah, Junyan Liu*, Song Peng, Wang Yang, Photocarrier Radiometry for Non-contact Evaluation of Monocrystalline Silicon Solar Cell Under Low-Energy (< 200 keV) Proton Irradiation, Int. J. Thermophysics, 2018,39:74 Wang Xinjian, Junyan Liu*, He Yu, Wang Yang, Selective laser melting of ink-printed (SLM-IP) copper (Cu) nanoparticles (NPs) for facile controllable fabrication of super-hydrophobic surface, Surface & Coatings Technology, 2018, 347: 84–91 Wang Xinjian, Junyan Liu*, Yang Lijun, He Yu, Wang Yang, Nano-sized amorphous carbon covered surface formed by selective laser melting of ink-printed (SLM-IP) copper (Cu) nanoparticles (NPs) , Applied Surface Science, 2018, 448:133–137 Wang Fei, Wang Yonghui, Junyan Liu*, Wang Yang, Theoretical and experimental study on carbon/epoxy facings-aluminum honeycomb sandwich structure using lock-in thermography, Measurement, 2018, 126: 110–119 Liu Yang, Meng Xianglin, Junyan Liu*, Wang Yonghui,Xu Hongtu,Wang Yang, Simulation and experimental investigation of turbid medium in frequency domain photoacoustic response induced by modulated laser, Infrared Physics & Technology, 2018, 92: 109–114 Wei Peng, Fei Wang, Xianglin Meng, Yonghui Wang, Junyan Liu*, Peng Xiao, Yang Wang, Jing-min Dai, Dynamic thermal tomography based on continuous wavelet transform for debonding detection of the high silicon oxygen phenolic resin cladding layer, Infrared Physics & Technology, 2018, 92: 115–121 Xianglin Meng*, Wantao He, Junyan Liu, An Investigation of the High Efficiency Estimation Approach of the Large-Scale Scattered Point Cloud Normal Vector, Appl. Sci. 2018, 8, 454 Junyan Liu* ,Xinjian Wang, Yang Wang, A complete study on satellite thruster structure (STS) manufactured by a hybrid manufacturing (HM) process with integration of additive and subtractive manufacture, Int J Adv Manuf Technol, (2017) 92:4367–4377 Xinjian Wang, Junyan Liu*, Yang Wang, Yana Fu, Fabrication of friction-reducing texture surface by selective laser melting of ink-printed (SLM-IP) copper (Cu) nanoparticles(NPs), Applied Surface Science, 2017, 396:659–664 Wang Fei, Junyan Liu*, Md. Oliullah, Wang Xiaochun, Wang Yang, Heterodyne lock-in thermography of early demineralized in dental tissues, Infrared Physics & Technology, 2017, 87: 83–90 Song Peng, Junyan Liu*, Md. Oliullah, Wang Yang, Series resistance imaging of silicon solar cells by lock-in photoluminescence, Phys. Status Solidi RRL 2017, 11( 7): 1700153 Tang Qingju*, Junyan Liu, Dai Jingmin*, Yu Zongyan, Theoretical and experimental study on thermal barrier coating (TBC) uneven thickness detection using pulsed infrared thermography technology, Applied Thermal Engineering, 2017, 114:770-775 Junyan Liu*, Wang Fei, Liu Yang, Wang Yang, Inverse methodology for identification the thermal diffusivity and subsurface defect of CFRP composite by lock-in thermographic phase (LITP) profile reconstruction, Composite Structures, 2016,138:214-226 Wang Fei, Junyan Liu*, Liu Yang, Wang Yang Research on the fiber lay-up orientation detection of unidirectional CFRP laminates composite using thermal-wave radar imaging, NDT&E International, 2016, 84:54-66 Wang Fei, Junyan Liu*, Yang Junhan, Md. Oliullah, Wang Xiaochun, Wang Yang, High-frequency heterodyne lock-in thermography (HeLIT): A highly sensitive method to detect early caries, Applied Physics Letter, 109, 141904 (2016) Song Peng, Junyan Liu*, Yuan Huimin, Md. Oliullah, Wang Fei, Wang Yang, Photocarrier radiometry for predicting the degradation of electrical parameters of monocrystalline silicon (c-Si) solar cell irradiated by 100 KeV proton beams, Nuclear Instruments and Methods in Physics Research B, 2016, 383:171-176 Song Peng, Junyan Liu*.Photocarrier Radiometry for Noncontact Evaluation of Monocrystalline Silicon (c-Si) Solar Cell Irradiated by 1 MeV Electron Beams, Int. J. Thermophysics, 2016,37:87 Wang Fei, Junyan Liu*,Detection of Fiber Layer-Up Lamination Order of CFRP Composite Using Thermal-Wave Radar Imaging, Int. J. Thermophysics, 2016,37:97 Tang Qingju* , Dai Jingmin* , Junyan Liu*, Liu Chunsheng, Liu Yuanlin, Ren Chunping, Quantitative detection of defects based on Markov–PCA–BP algorithm using pulsed infrared thermography technology, Infrared Physics & Technology, 2016, 77: 144–148 刘俊岩, 宋鹏, 秦雷, 王飞, 王扬 调制激光致硅晶圆载流子辐射扫描成像试验研究,物理学报,64,(8), 2015, 087804 Junyan Liu*, Jinglong Gong, Lei Qin, Yang Wang, Study on Lock-in Thermography Defect Detectability for Carbon-Fiber-Reinforced Polymer (CFRP) Sheet with Subsurface Defects, Int. J. Thermophys, 36: 1259-1265, (2015) Junyan Liu*, Q. J. Tang, Y. Wang, J. L. Gong, L. Qin, Investigation on Coating Uniformity of High-Temperature Alloy with SiC Thermal Barrier Coating Using Pulsed Infrared Thermographic Technique, Int. J. Thermophys, 36: 1252-1258, (2015) Junyan Liu*, Song Peng, Wang Fei, Wang Yang, Photocarrier radiometry for noncontact evaluation of space monocrystalline silicon (c-Si) solar cell with low-level energy (<1 MeV) electron irradiation, China Physics B 24(9): 097801, (2015) 刘俊岩, 王飞, 王晓春, 马莹,王扬, 牙齿组织光热动态特性仿真与试验研究,物理学报, 64(19): 194203, (2015) Junyan Liu*, Liu Yang, Wang Fei, Wang Yang, Study on probability of detection (POD) determination using lock-in thermography for nondestructive inspection (NDI) of CFRP composite materials, Infrared Physics & Technology, 71: 448-456,(2015) Gong Jinlong, Junyan Liu*, Wang Fei, Wang Yang, Inverse heat transfer approach for nondestructive estimation the size and depth of subsurface defects of CFRP composite using lock-in thermography, Infrared Physics & Technology, 71: 439-447,(2015) Junyan Liu*, J. L. Gong, L. Qin, B. Guo, Y. Wang, Three-Dimensional Visualization of Subsurface Defect Using Lock-In Thermography, Int. J. Thermophys, 36: 1226-1235, (2015) Junyan Liu*, A. Melnikov, A. Mandelis, Non-contact Determination of Local Efficiency of mc-Si Solar Cells Using Quantitative Lock-In Thermographic and Carrierographic (Photoluminescence) Imaging, Int. J. Thermophys, 36: 987-996, (2015) Jinlong Gong, Junyan Liu*, Lei Qin, Yang Wang, Investigation of carbon fiber reinforced polymer (CFRP) sheet with subsurface defects inspection using thermal-wave radar imaging (TWRI) based on the multi-transform technique, NDT&E International,62, 130-136, (2014) Junyan Liu*, Gong Jinlong, Qin Lei, Wang Huiming, Wang Yang, Study of inspection on metal sheet with subsurface defects using linear frequency modulated ultrasound excitation thermal-wave imaging (LFM-UTWI), Infrared Physics & Technology, 62, 136-142,(2014) Junyan Liu*, Tang Qingju, Wang Yang, Lu Yumei, Zhang Zhiping, Defect’s geometry feature recognition based on infrared image edge detection, Infrared Physics & Technology,67 387-390 (2014) 刘俊岩,秦雷, 龚金龙, 王扬, A. Mandelis, 太阳能电池光载流子辐射复合的红外特性仿真与试验,红外与毫米波学报, 33 (3), 2014, 248-255 刘俊岩,秦雷, 宋鹏, 龚金龙, 王扬, A. Mandelis,硅太阳能电池的调制载流子红外辐射动态响应与参数分析, 物理学报, 63(22), 2014, 227801 Junyan Liu*, Alexander Melnikov, and Andreas Mandelis, Contactless measurement of electrical parameters and estimation of current-voltage characteristics of Si solar cells using the illumination intensity dependence of lock-in carrierography (photoluminescence) images, Journal of Applied Physics, 114, 104509 (2013) Junyan Liu*, Liu Liqiang, Wang Yang. Experimental study on active infrared thermography as a NDI tool for carbon-carbon composites. Composite Part: B-Engineering, 2013 45(1): 138-147, yan Liu*,, Alexander Melnikov, Andreas Mandelis. Silicon solar cell electrical parameter measurements through quantitative lock-in photoluminescence (dynamic carrierography) and thermographic imaging, Phys. Status Solidi A, 210 (10), (2013) 2135-2145 Tang Qingju, Junyan Liu*, Wang Yang. Inspection on SiC coated carbon-carbon composite with subsurface defects using pulsed thermography, Infrared Physics & Technology, 2013, 60:183-189 Tang Qingju, Junyan Liu*, Wang Yang. Experimental study of inspection on SiC coated high-temperature alloy plates with defects using pulsed thermographic technique, Infrared Physics & Technology, 2013, 57: 21-27 Junyan Liu*,Gong Jinlong, Liu Liqiang, Qin Lei, Wang Yang. Investigation on Stress Distribution of Multilayered Composite Structure (MCS) using Infrared Thermographic Technique, Infrared Physics & Technology, 61, 134-143, 2013 秦雷,刘俊岩,龚金龙,姜斌,王扬. 超声红外锁相技术检测金属表面裂纹. 红外与激光工程,2013,42(5):1123-113 秦雷, 刘俊岩, 龚金龙, 王扬. 调制激光激发PN结少数载流子分布及频域响应特性研究.光电子激光,2013, 24 (6): 1174-1183 Qin Lei, Junyan Liu*, Wang Yang. The study of infrared photocarrier radiometry based on Si semiconductor, Applied Mechanics and Materials, 2013, 268: 1623-1626 秦雷; 刘俊岩; 龚金龙. 调制激光致载流子辐射中信号的频域特性分析.红外与激光工程, 42(10),2642-2645,2013 Qin Lei, Junyan Liu*, Jiang Bin. Simulation and experimental research of sheet metal defect detection based on ultrasonic lock-in thermography, Advanced Materials Research, 2013, 602-604: 2283-2286 Junyan Liu*, Tang Qingju, Wang Yang. The study of inspection on SiC coated carbon-carbon composite with subsurface defects by lock-in thermography, Composites Science and Technology 2012, 72(11):1240-1250 Junyan Liu*, Qin Lei, Tang Qingju. Experimental study of inspection on a metal plate with defect using ultrasound lock-in thermographic technique, Infrared Physics & Technology, 2012, 55:284-291 Junyan Liu*,, Tang Qingju, Liu Xun. Research on the quantitative analysis of subsurface defects for non-destructive testing by lock-in thermography, NDT & E International, 2012, 45(1):104-110 X. D Li*, H Zhang, D. L Wu, X Liu, Junyan Liu, Adopting lock-in infrared thermography technique for rapid determination of fatigue limit of aluminum alloy riveted component and affection to determined result caused by initial stress, International Journal of Fatigue,2012,36(1):18-23 Junyan Liu*, Wang Yang, Dai Jingmin. Research on thermal wave processing of lock-in thermography based on analyzing image sequences for NDT , Infrared Physics & Technology, 2010, 53(5): 348-357 Junyan Liu*, Liu Huanpeng, Han Rongdi and Wang Yang, The study on lubrication action with water vapor as coolant and lubricant in cutting ANSI 304 stainless steel, I. J. of Machine Tools & Manufacture, 50(3), (2010) 260-269 Junyan Liu*, Han Rongdi and Wang Yang, Research on difficult-cut-material in cutting with application of water vapor as coolant and lubricant, Industrial Lubrication and Tribology, 62(5) (2010) 252-261 汪子君, 刘俊岩, 戴景民. 相位法红外无损检测的传热分析与有限元仿真, 红外与毫米波学报, 2008 ,l27(5): 361-4 Junyan Liu*, Han Rongdi. Study on lubricating characteristic and tool wear with water vapor as coolant and lubricant in green cutting. Wear, 2007 (262):442-452. Junyan Liu*, Han Rongdi. Study on the effect of jet flow parameters with water vapor as coolants and lubricants in green cutting. Industrial Lubrication and Tribology, 2007,(59):278-284. (SCI、EI)IF:0.605/2017 Junyan Liu*, Rongdi Han, Yongfeng Sun. Research on experiments and Action mechanism with water vapor as coolant and lubricant in Green Cutting. International Journal of Machine Tools & Manufacture. 45 (2005): 687-694 Han Rongdi, Junyan Liu*,. Experimental study on green cutting with water vapor as coolant and lubricant. 2006.06 Key Engineering Materials, 315-316:45-50. Rongdi Han, Junyan Liu*, Yongfeng Sun. Research on the experimentation on Green cutting with water vapor as coolant and lubricant. Industrial Lubrication & Tribology. 2005. Vol 57 : 187-192 刘俊岩, 刘勋, 王扬. 线性调频的红外热波成像检测技术, 红外与激光工程, 2012 41(6):1416-1422 Liu Liqiang, Junyan Liu*, Wang Yang. Study on infrared thermal wave inspection technology using linear frequency modulated (LFM) light excitation, Advanced Materials Research, 2012, 542-543: 659-662 刘慧, 刘俊岩, 王扬. 基于超声锁相热像技术检测缺陷的热图序列处理, 红外与激光工程, 2011, 40(5):944-948 Liu, Xun, Junyan Liu*, Dai Jingmin. Research on structure stress analysis on composite by lock-in thermography, Advanced Materials Research, 2011, 150-151:1649-1654 Junyan Liu*,, Liu Xun, Wang Yang. Study on full-field stress analysis for composite material structure using lock-in thermography, Advanced Materials Research, 2011, 314-316:1372-1376 Junyan Liu*, Liu Xun, Wang Yang. The study on stress analysis of compound steel-foam-glass fiber reinforced polymer (GFRP) structure by lock-in thermography, Applied Mechanics and Materials, 2011, 80-81: 64-69 Tang Qing Ju, Junyan Liu*, Wang Yang. Effect of modulation frequency on detecting metal materials with microcracks based on ultrasound infrared lock-in thermography, Advanced Materials Research, 2011, 314-316:1387-1390 Tang Qingju, Junyan Liu*, Wang Yang, Liu Hui. Subsurface interfacial defects of metal materials testing using ultrasound infrared lock-in thermography, Procedia Engineering, 2011, 6: 499-505 Junyan Liu*, Tang Qingju, Wang Yang. Research on the quantitative analysis of subsurface defects for nondestructive testing by ultrasound lock-in thermography, Advanced Materials Research, 2011, 301-303: 635-640 Liu Xun, Junyan Liu*, Li Xudong, Zhang Guangyu. Analysis of stress in aircraft components using lock-in thermography, Materials Science Forum, 2011, 663-665:1073-1076 Tang, Qing Ju , Junyan Liu*,Wang, Yang. Theoretical and experimental study on nondestructive pulse phase infrared thermography testing technology, Advanced Materials Research, 2011, 314-316:1483-1486 Liu Hui, Junyan Liu*, Wang Yang, Li Huijuan. Detection of unbonds in honeycomb sandwich structure using lock-in thermography, Advanced Materials Research, 2010, 97-101: 4363-4366 刘俊岩, 戴景民, 王扬. 红外锁相法热波检测技术及缺陷深度测量, 光学-精密工程, 2010 18(1): 37-44 刘慧, 刘俊岩, 王扬. 超声锁相热像技术检测接触界面类型缺陷, 光学-精密工程, 2010, 18(3): 653-661 刘俊岩*,戴景民,王扬. 红外图像序列处理的锁相热成像理论与试验, 红外与激光工程, 2009, 38, (2): 346-351 Junyan Liu*, Han Rongdi. Research on cooling Action and simulation of temperature distribution with water vapor as coolants and lubricants in green cutting. Applied Mechanics and Materials, 2008 (10-12):276-80. Junyan Liu*, Han Rongdi. The Investigations of Tool Wear and Wear Mechanism with Water Vapor as Coolants and Lubricants in Green Cutting. Applied Mechanics and Materials, 2008, (10-12):913-7. 会议论文 Junyan Liu*, Wu Song , Wang Yang and Wang Zhilan. Inspection of defects in CFRP-Foam layered structure composite plates of aerospace materials using lock-in thermography, 36th International MATADOR Conference 2010, 2010, Junyan Liu*, Wang Yang. Research on the structure stress analysis based on IR lock in thermography, Proceedings of SPIE - The International Society for Optical Engineering, 2009, 7375, Junyan Liu* , Wang Yang, Liu Hui, He, Yinhang. Research on CFRP materials nondestructive testing by IR lock-in thermography, Proceedings of SPIE - The International Society for Optical Engineering, International Symposium on Photoelectronic Detection and Imaging 2009 - Advances in Infrared Imaging and Applications, 2009, 7383 Junyan Liu*, Dai Jingmin, Wang Yang. Research on lock in thermography for aerospace materials of nondestructive test based on image sequence processing, Proceedings of SPIE - The International Society for Optical Engineering, 2009, 7375 Liu Hui, Wang Yang, Junyan Liu*, Gong Haijun. Effect of modulation frequency on detecting defects of metal plates using infrared lock-in thermography, Proceedings of SPIE - The International Society for Optical Engineering, 2009, 7283 Wang Zijun, Junyan Liu*, Dai Jingmin. Lock-in Thermography to Evaluation of Destruction area and Determination of Depth. Proc of SPIE,2007, Vol6723 62731F-1~62731F-5 Junyan Liu*, Dai Jingmin.Research on Lock in Thermography for Aerospace Materials of Nondestructive Test based on Image Sequence Processing. Proc. of SPIE, 2008 V7375, 73753U. Liu Junyan, Wang Yang. Research on the Structure Stress Analysis Based on IR Lock in Thermography. Proc. of SPIE, 2008 Vol.7375, 73752O. Wang Fei, Junyan Liu*, Liu Yang, Wang Yang, Gong Jinlong. Detection of Fiber Layer-Up Lamination Order of CFRP Composite Using Thermal-Wave Radar Imaging, 18th International Conference on Photoacoustic and Photothermal Phenomena(ICPPP18), September 6-10, 2015, Novi Sad, Serbia. Song Peng, Junyan Liu*, Yuan Huimin, Wang Fei, Wang Yang. Photocarrier Radiometry for Noncontact Evaluation of Monocrystalline Silicon (c-Si) Solar Cell With 1MeV Electron Irradiation. 18th International Conference on Photoacoustic and Photothermal Phenomena(ICPPP18), September 6-10, 2015, Novi Sad, Serbia. Junyan Liu*, Gong J, Qin L, et al. Study on Lock-in Thermography Defect Detectability for Carbon-Fiber-Reinforced Polymer (CFRP) Sheet with Subsurface Defects. 17th International Conference on Photoacoustic and Photothermal Phenomena (ICPPP17), October 20-24, 2013, Suzhou, China. Junyan Liu*, Gong J L, Qin L, et al. Three-Dimensional Visualization of Subsurface Defect Using Lock-In Thermography. 17th International Conference on Photoacoustic and Photothermal Phenomena (ICPPP17), October 20-24, 2013, Suzhou, China. Junyan Liu*, Melnikov A, Mandelis A. Non-contact Determination of Local Efficiency of mc-Si Solar Cells Using Quantitative Lock-In Thermographic and Carrierographic (Photoluminescence) Imaging. 17th International Conference on Photoacoustic and Photothermal Phenomena (ICPPP17), October 20-24, 2013, Suzhou, China. Junyan Liu*, Tang Q J, Wang Y, et al. Investigation on Coating Uniformity of High-Temperature Alloy with SiC Thermal Barrier Coating Using Pulsed Infrared Thermographic Technique. 17th International Conference on Photoacoustic and Photothermal Phenomena (ICPPP17), October 20-24, 2013, Suzhou, China. Qin Lei, Junyan Liu*, Wang Yang. The study of infrared photocarrier radiometry based on Si semiconductor, International Conference on Applied Mechanics, Materials and Manufacturing, 2013, China Qin Lei, Junyan Liu*, Jiang Bin. Simulation and experimental research of sheet metal defect detection based on ultrasonic lock-in thermography, International Conference on Materials and Products Manufacturing Technology, 2013, China Liu Liqiang, Junyan Liu*, Wang Yang. Study on infrared thermal wave inspection technology using linear frequency modulated (LFM) light excitation, International Conference on Advanced Engineering Materials and Technology, 2012, China Junyan Liu*, Liu Xun, Wang Yang. Study on full-field stress analysis for composite material structure using lock-in thermography, International Conference on Advanced Design and Manufacturing Engineering, 2011, China Junyan Liu*, Liu Xun, Wang Yang. The study on stress analysis of compound steel-foam-glass fiber reinforced polymer (GFRP) structure by lock-in thermography, International Conference on Information Engineering for Mechanics and Materials, 2011, China Tang Qing Ju, Junyan Liu*, Wang Yang. Effect of modulation frequency on detecting metal materials with microcracks based on ultrasound infrared lock-in thermography, International Conference on Advanced Design and Manufacturing Engineering, 2011, China Junyan Liu*, Tang Qingju, Wang Yang. Research on the quantitative analysis of subsurface defects for nondestructive testing by ultrasound lock-in thermography, International Conference on Advanced Measurement and Test, 2011, China Liu Xun, Junyan Liu*, Li Xudong, Zhang Guangyu. Analysis of stress in aircraft components using lock-in thermography, Materials Science Forum, 2011, China Tang, Qing Ju , Junyan Liu*, Wang, Yang. Theoretical and experimental study on nondestructive pulse phase infrared thermography testing technology, International Conference on Advanced Design and Manufacturing Engineering, 2011, China Junyan Liu*, Wang Yang. Inspection of subsurface defects in honeycomb structure composites using infrared lock-in thermography, Word of Journal Engineering, 2011: 707-708, China Liu Hui, Junyan Liu*, Wang Yang, Li Huijuan. Detection of unbonds in honeycomb sandwich structure using lock-in thermography, Advanced Materials Research, 2010, 97-101: 4363-4366, China Liu Hui, Junyan Liu*, Wang Yang. Quantitative detection of defect using ultrasound infrared lock-in thermography, Proceedings of SPIE - The International Society for Optical Engineering, 2010, 7656, PART 1, China Junyan Liu*, Wu Song , Wang Yang and Wang Zhilan. Inspection of defects in CFRP-Foam layered structure composite plates of aerospace materials using lock-in thermography, 36th International MATADOR Conference 2010, 2010, UK, London Junyan Liu*, Wang Yang. Research on the structure stress analysis based on IR lock in thermography, Proceedings of SPIE - The International Society for Optical Engineering, 2009, China Han Rongdi, Junyan Liu*. The Effect of Application Vapor steam as Coolant and Lubricant in Green cutting. Proceedings of International Conference on Mechanical Engineering and Mechanics.2005 Liu Junyan*, Han Rongdi. Experimental Study on Difficult-cut-material in machining with application of water vapor as coolants and lubricants. Proceedings of Lem21, 2007, Japan

推荐链接
down
wechat
bug