近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Shandeng Chen, Qingshun Bai, Hongfei Wang, Sanchuan Wang. Unveiling the site-dependent characteristics and atomic mechanism of graphene growth on the polycrystalline diamond: Insight from the experiments and ReaxFF studies, Carbon, 2023, 213: 118303.
Hongfei Wang, Qingshun Bai, Shandeng Chen, Peng Wang, Wanmin Guo, Yuhao Dou. Wear suppression and interface properties of diamond tool in micro-milling of TC4 alloy under graphene nanofluid MQL environment, Journal of Cleaner Production, 2023, 418: 138180.
Yuhai Li, Qingshun Bai, Caizhen Yao, Peng Zhang, Rongqi Shen, Hao Liu, Lihua Lu, Yilan Jiang, Xiaodong Yuan, Xinxiang Miao, Wei Han. Long-lasting antifogging mechanism for large-aperture optical surface in low-pressure air plasma in-situ treated, Applied Surface Science, 2022, 581: 152358.
Yuhai Li, Qingshun Bai, Yuheng Guan, Peng Zhang, Rongqi Shen, Lihua Lu, Hao Liu, Xiaodong Yuan, Xinxiang Miao, Wei Han, Caizhen Yao. In situ plasma cleaning of large-aperture optical components in ICF, Nuclear Fusion, 2022, 62: 076023.
Rong-qi Shen, Qing-shun Bai, Yu-hai Li, Yong-bo Guo, Peng Zhang. Molecular investigation on the desorption process of alkane contaminant from fused silica surface in nonionic surfactant solution，Applied Surface Science, 2021, 565: 150516.
Rong-qi Shen, Qing-shun Bai, Yu-hai Li, Yong-bo Guo, Fei-hu Zhang. Ejecta distribution and transport property of fused silica under the laser shock loading, Journal of Applied Physics, 2020,127: 245114.
Xin He, Qingshun Bai, Rongqi Shen, Feihu Zhang, Yongbo Guo. The evolution of configuration and final state of graphene on rough iron surface, Applied Surface Science, 2020, 530: 147084.
Rong-qi Shen, Qing-shun Bai, Yu-hai Li, Fei-hu Zhang. Molecular dynamics simulation of phase transformation of fused silica under nanoparticle impact: The influence of temperature and impact velocity, Computational Materials Science, 2019. 170：109169
Bai Qingshun, Li Yuhai, Zhang Kai, Wang Canbin, Yuan Xiaodong, Zhang Feihu. Cleaning state of the loop case for optical crystal module in final optics assembly, Nanomanufacturing and Metrology, 2018, 1(4): 260-267.
Jinxuan Bai, Qingshun Bai, Zhen Tong, Hui Guo. Theoretical model for subsurface microstructure prediction in micro-machining Ti-6Al-4V alloy - Experimental validation, International Journal of Mechanical Sciences, 2018, 148: 64-72.
Shen Rongqi, Bai Qingshun, He Xin, Zhang Aimin, Zhang Feihu. Molecular dynamics simulation of the spreading of the nanosized droplet on graphene-coated substrate: the effect of the contact line forces. Molecular Simulation, 2018, 44: 15, 1229-1236.
Qingshun Bai, Zhiguo Wang, Yongbo Guo, Yuanjiang Shang. Graphitization behavior of single crystal diamond for the application in nano-metric cutting. Current Nanoscience, 2018, 14,(5): 377-383.
Qingshun Bai, Jinxuan Bai, Chao Hu, Hui Guo. Investigation on the dislocation evolution in nanoindentation with 2.5D discrete dislocation dynamics simulation and experiment. Materials Science & Engineering A. 2018, 730: 84-91.
Jinxuan Bai, Qingshun Bai, Zhen Tong. Experimental and multiscale numerical investigation of wear mechanism and cutting performance of polycrystalline diamond tools in micro-end milling of titanium alloy Ti-6Al-4V. International Journal of Refractory Metals & Hard Materials, 2018, 74, 40-51.
Xin He, Qingshun Bai, Rongqi Shen. Atomistic perspective of how graphene protects metal substrate from surface damage in rough contacts, Carbon, 2018, 130: 672-679.
Jinxuan Bai, Qingshun Bai, Chao Hu, Xin He, Xudong Pei. Research on the ductile-mode machining of monocrystalline silicon using polycrystalline diamond (PCD) tools, Int J Adv Manuf Technol, 2018, 94: 1981-1989.
Jinxuan Bai, Qingshun Bai, Zhen Tong, Guoda Chen. The influence of cutting parameters on the defect structure of subsurface in orthogonal cutting of titanium alloy, Journal of Materials Research, 2018, 33(6): 720-732.
Jinxuan Bai, Qingshun Bai, Zhen Tong. Multiscale analyses of surface failure mechanism of single-crystal silicon during micro-milling process, Materials, 2017, 10, 1424.
Jinxuan Bai, Qingshun Bai, Zhen Tong. Dislocation dynamics-based modeling and simulations of subsurface damages microstructure of orthogonal cutting of titanium alloy, Micromachines, 2017, 8(10): 309.
Q. S. Bai, X. He, K. Zhang, W. Yang, F. H. Zhang, X. D. Yuan. The adsorption behavior between particle contamination and fused silica in high-energy laser system, Proc. SPIE 10339, Pacific Rim Laser Damage 2017: Optical Materials for High-Power Lasers, 103392C.
F. Z. Sun, P. Zhang, Q. S. Bai, L. H. Lu, Y. C. Liang. Experimental and numerical investigation of ADP square crystal with large aperture in the new final optics assembly under the non-critical phase matching. Optics and Laser Technology, 2016, 78: 143-152.
Bai Qingshun, He Xin, Zhang Xiangqian, Shen Rongqi, Liang Yingchun. Mechanical property evaluation on the bending and compressing behaviour of nano-beam, Journal of Wuhan University of Technology-Materials Science Edition, 2016, 31(4): 903-909.
Jinxuan Bai, Qingshun Bai, Zhen Tong, Chao Hu, Xin He. Evolution of surface grain structure and mechanical properties in orthogonal cutting of titanium alloy, Journal of Materials Research, 2016, 31 (24): 3919-3929.
Tong Zhen, Jiang Xiangqian, Luo Xichun, Bai Qingshun, Xu Zongwei, Blunt Liam, Liang Yingchun. Review on FIB-induced damage in diamond materials, Current Nanoscience, 2016, 12(6): 685-695.
Q. S. Bai, X. P. Meng, C. C. Ji, J. X. Bai, Y. C. Liang. Drag reduction characteristics and flow field analysis of textured surface, Friction，2016, 4(2): 165-175.
Qingshun Bai, Xin He, Jinxuan Bai, Zhen Tong, An atomistic investigation of the effect of strain on frictional properties of suspended graphene, AIP Advances, 2016, 6(5): 055308-1-8
Quanlong Wang, Qingshun Bai, Jiaxuan Chen, Yongbo Guo, Wenkun Xie. Stress-induced formation mechanism of stacking fault tetrahedra innano-cutting of single crystal copper, Applied Surface Science, 2015, 355: 1153-1160.
Quanlong Wang, Qingshun Bai, Jiaxuan Chen, Hao Su, Zhiguo Wang, Wenkun Xie. Influence of cutting parameters on the depth of subsurface deformed layer in nano-cutting process of single crystal copper, Nanoscale Research Letters, 2015, 10: 396
Quanlong Wang, Qingshun Bai, Jiaxuan Chen, Yazhou Sun, Yongbo Guo, Yingchun Liang, Subsurface defects structural evolution in nano-cutting of single crystal copper, Applied Surface Science, 2015, 344: 38-46.
Q. S. Bai, X. P. Meng, Y. C. Liang and K. Cheng. Static and dynamic interface characteristics between functional micro-structure and water, International Journal of Nanomanufacturing, 2015, 11(1/2):13-24.
Qingshun Bai, Kai Li, Yingchun Liang, Kai Cheng. Wear and breakage behaviors of PCD small-diameter end-mill: a case study on machining 2A12 aluminum alloy, International Journal of Advanced Manufacturing Technology, 2015,77(5-8):839-846.
Qingshun Bai, Yingchun Liang, Kai Cheng, Fei Long. Design and analysis of a novel large aperture grating device and its experimental validation, Proc. Inst. Mech. Eng. Part B-J. Eng. Manuf., 2013, 227(9): 1349-1359.
Liang, Y., Chen, W., Bai, Q. et al. Design and dynamic optimization of an ultraprecision diamond flycutting machine tool for large KDP crystal machining, Int J Adv Manuf Technol, 2013, 69: 237-244.
Wanqun Chen, Qingshun Bai, Kai Yang, Qiang Zhang, Yingchun Liang. Dynamics design optimization and experimental validation of a miniaturized machine tool for micro-milling. Prod. Eng. Res. Devel., 2013,7(5): 477- 482.
Qing-Shun Bai, Kai Cheng, Bin He and Ying-Chun Liang. Design of a novel tensile testing device and its application in tensile testing experiments on copper micro wires, Proc. Inst. Mech. Eng. Part B-J. Eng. Manuf., 2012, 226(9): 1594-1600.
Q. S. Bai, K. Yang, Y. C. Liang, C. L. Yang, B. Wang. Numerical simulation and experiment on micro-diameter cutter wear considering tool run-out in micro-end-milling. Vac. Sci. Technol. B, 2009, 27(3): 1566-1572.
H. M. Pen, Q. S. Bai, Y. C. Liang, M. J. Chen. Multiscale simulation of nanometric cutting of single crystal copper effect of different cutting speeds. Acta Metall. Sin.-Engl. Lett., 2009, 22(6): 440- 446.
Li, De-Gang; Bai, Qing-Shun; Liang, Ying-Chun; Dong, Shen. Nano-vibration cutting process of single crystal silicon by molecular dynamics. Nanotechnology and Precision Engineering, 2008, 6(4): 242- 248.
Bai Qingshun, Yao Yingxue, Bex Phillip, Zhang Grace. Study on wear mechanisms and grain effects of PCD tool in machining laminated flooring. Int. J. Refract. Met. Hard Mat.. 2004, 22(2-3): 111-115.
Bai Qingshun, Yao Yingxue, Chen Suodong. Research and development of polycrystalline diamond woodworking tools. Int. J. Refract. Met. Hard Mat.. 2002, 20(5-6): 395-400.
陈善登，白清顺，窦昱昊，郭万民，王洪飞，杜云龙. 金刚石晶界辅助石墨烯沉积的成核机理仿真研究, 物理学报, 2022, 71(8): 086103.
王旭初，白清顺，王鹏，程凯，赵亮. 微细铣削的数字孪生建模技术研究进展. 航空精密制造技术, 2021，64(20): 56-64.
白清顺, 窦昱昊, 沈荣琦, 郭万民, 郭永博. 石墨烯功能表面润湿性的研究进展. 功能材料，2021, 52(10): 10029-10038.
李玉海，白清顺，卢礼华，张飞虎，袁晓东. 大口径透镜模块的颗粒污染物吹扫机理及验证，光学精密工程，2021.29(4): 733-739 （封面论文）
李玉海, 白清顺, 杨德伦, 张鹏, 卢礼华, 张飞虎, 袁晓东. 铝合金表面的有机污染物等离子体清洗机理及验证. 中国表面工程, 2020,33（6）: 58-67.
郭万民，白清顺，窦昱昊，郭永博，杜云龙. 石墨烯在不锈钢材料应用中的减摩和耐磨特性研究进展，表面技术. 2021, 50(4): 43-55.
张亚博，白清顺，何欣，庆凌博，岳松洁，刘新. 微铣削AA356铝合金的CVD金刚石刀具磨损特性分析. 金刚石与磨料磨具工程, 2021, 44(1): 44-50.
白清顺，张亚博，王永旭，何欣. 微裂纹缺陷对CVD金刚石微刀具损伤失效的影响研究. 表面技术, 2021, 50(2): 355-362.
白清顺, 窦昱昊, 何欣, 张爱民, 郭永博. 基于分子动力学模拟的铜晶面石墨烯沉积生长机理研究. 物理学报, 2020, 69(22): 226102.
白清顺, 张凯, 沈荣琦, 张飞虎, 苗心向, 袁晓东. 单晶铁金属表面污染物的激光烧蚀机理. 物理学报. 2018, 67(23): 234401
白清顺, 沈荣琦, 何欣, 刘顺, 张飞虎, 郭永博. 纳米微结构表面与石墨烯薄膜的界面粘附特性研究.物理学报, 2018, 67(3): 030201.
白清顺, 胡 超, 白锦轩, 郭辉, 盆洪民. 基于离散位错动力学的单晶铜构件拉伸特性研究, 塑性工程学报. 2018, 25(5): 270-276.
白清顺，郭永博，陈家轩，卢礼华，张庆春，张飞虎，赵航，梁迎春. 超洁净制造的研究发展.机械工程学报，2016, 52(19): 145-153.
何欣, 白清顺, 白锦轩. 多晶石墨烯拉伸断裂行为的分子动力学模拟研究. 物理学报, 2016, 65(11): 116101.
白清顺，王群，张庆春，娄铮，梁迎春. 高精度微位移促动器及其在极地天文望远镜中的应用.中国科学: 技术科学, 2016,46(7): 697-705. (封面论文)
胡超，白清顺，白锦轩，张庆春，疏水性微结构表面的抗结冰特性仿真研究. 表面技术，2016, 45(9): 145-153.
白清顺，王群，张庆春，梁迎春，娄铮. 低温微位移促动器的设计与实验. 天文研究与技术, 2016, 13(2): 199-204.
白清顺，张向前，童振，梁迎春，盆洪民. 基于QC多尺度模拟的单晶铜微构件压缩过程力学特性分析，机械强度, 2013,6(6): 810-815.
白清顺，童振，梁迎春，陈家轩，王治国. 单晶Cu纳米杆拉伸力学特性的尺寸依赖性模拟研究, 金属学报，2010, 46(10): 1173-1180.
杨凯，白清顺，梁迎春，王波，孙雅洲，赵岩. 微细铣削铅黄铜时微径铣刀的损伤研究. 摩擦学学报, 2008, 28(5): 448-452.
白清顺, 杨春利. PCD刀具加工Al2O3颗粒耐磨层的应力分布有限元分析. 工具技术. 2007, 1: 33-35.
白清顺, 梁迎春, 李德刚, 杨春利. 纳米加工过程的分子动力学模拟技术研究. 微细加工技术. 2006, 4: 57-62.
童利东，白清顺 等.微型铣刀及微细铣削技术的研究. 工具技术. 2006, 40(12): 3-7.
白清顺，王毓明，梁迎春. 基于Pro/E的三轴转台装配与运动学仿真. 中国惯性技术学报. 2005, 14(1): 83-88.
姚英学，白清顺，Bex Phillip，Zhang Grace. PCD刀具加工强化复合地板中磨损行为的断裂力学分析与实验研究. 金刚石与磨料磨具工程. 2004, (1): 1-4.
白清顺，姚英学，Bex Phillip，Zhang Grace. 聚晶金刚石刀具加工强化复合地板时的切削性能及磨损机理研究. 摩擦学学报. 2003, 23 (2): 81-85.
京公网安备 11010802027423号