个人简介
王永辉,新加坡国立大学博士(Ph.D.),副教授(校青年拔尖人才),博士生导师。发表SCI论文60余篇,其中第一/通讯作者SCI论文50余篇,出版英文学术专著1部。主持国家自然科学基金面上项目和青年项目、黑龙江省优秀青年基金、中国博士后基金面上项目和特别资助,黑龙江省博士后基金特别资助和面上项目等,获黑龙江省科技进步奖一等奖(排名第5),担任国内外多个学术期刊编委、青年编委、特刊编辑等,为“中国建筑金属结构协会铝结构分会”理事、“中国地震学会基础设施防震减灾青年委员会”委员、“国际防护结构学会(International Association of Protective Structures )”会员。
工作经历
2019.01-至今,哈尔滨工业大学,土木工程学院,副教授(校青年拔尖人才)
2016.05-2018.12,哈尔滨工业大学,土木工程学院,讲师
2015.04-2016.04,新加坡国立大学,土木与环境工程系,Research Fellow
教育经历
2011.01-2015.05,新加坡国立大学,土木工程,博士(导师:J Y Richard Liew院士)
2008.09-2010.07,哈尔滨工业大学,结构工程,硕士(导师:翟希梅教授)
2004.09-2008.07,哈尔滨理工大学,工程力学,学士
奖项成果
2020年,黑龙江省科技进步一等奖(5/11)。范峰,支旭东,张超琦,翟希梅,王永辉,张荣,严佳川,姚迪,林莉,王多智,马加路
研究领域
工程结构抗冲击、抗爆炸
新型钢-混凝土组合结构
新型泡沫材料吸能结构
近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
Impact responses of the steel-PU foam-concrete-tube multilayer energy absorbing panel: Numerical and analytical studies
Experimental and analytical studies on a novel steel-PU foam-concrete-tube multilayer energy absorbing panel under impact loading by a cylinder head
Behaviors of steel–concrete-steel sandwich panel with aluminum foam-filled energy absorbing supports under low-velocity impact
Improving blast protection of double-layered system for infilled masonry wall in frame structure
Numerical and Theoretical Study on Failure Characteristics and Damage Assessment Model of Curved Steel-Concrete-Steel Sandwich Shells Subjected to Impact Load
Finite element analysis of steel-concrete-steel sandwich beams with novel interlocked angle connectors subjected to impact loading
Blast resistance of ECC and composite slabs subjected to near-field explosion
Experimental study on a novel steel-PU foam-concrete-tube multilayer energy absorbing panel under impact loading
Behaviour of a Sacrificial Cladding with Foam Concrete-Filled Square Tubes under Impact Loads
A novel energy-absorbing composite structure with layers of basalt fiber fabric constraining waste brick particles and foam concrete
Investigation on lateral impact resistant performance of aluminum foam-filled 6082-T6 aluminum alloy circular tubes: Experimental and numerical study
Impact responses of steel–concrete–steel sandwich panels with interlocked angle connectors: Experimental and numerical studies
Protection performance of sacrificial cladding with foam concrete filled aluminum tubes under blast loading
Impact response of SCS sandwich panel with energy absorption connectors: Experimental and numerical studies
Response of multi-cell steel–concrete–steel sandwich panels impacted by a hemi-spherical head: Experimental and numerical studies
Punching behaviors of steel–concrete–steel sandwich panels with interlocked angle connectors: Experimental and analytical studies
Blast mitigation performance of a novel cladding–connector system
Static behaviours of steel-concrete-steel sandwich beams with novel interlocked angle connectors: Test and analysis
Impact Response and Structural Optimization of CSCS Sandwich Shells Under Vehicle Impact
Experimental and analytical studies on impact behaviours of a steel–concrete–steel sandwich beam with novel interlocked angle connectors
Push-Out Tests on Interlocked Angles Connectors in Steel-Concrete-Steel Composite Structure
Experimental study on dynamic response of 6082-T6 aluminum alloy circular tubes under lateral low-velocity impact loading
Shock Environment Assessment of Underground Arch–Wall Structures Subjected to Ground Shock
Protection effectiveness of sacrificial cladding for near-field blast mitigation
Tensile resistance of novel interlocked angle connectors used in steel-concrete-steel sandwich structures
Experimental and numerical studies on novel stiffener-enhanced steel-concrete-steel sandwich panels subjected to impact loading
Flexural behaviours of one-way steel-concrete-steel sandwich panels with novel hybrid connectors: Tests and analysis
Energy absorption behaviour of an aluminium foam-filled circular-triangular nested tube energy absorber under impact loading
Impact behavior of a cladding sandwich panel with aluminum foam-filled tubular cores
Mitigating confined blast response of buried steel box structure with foam concrete
Experimental and numerical studies on steel-polyurethane foam-steel–concrete-steel panel under impact loading by a hemispherical head
Finite Element Modeling of Steel-Concrete-Steel Sandwich Beams with Bolt Connectors Under Drop Weight Impact
Behavior of steel-concrete-steel sandwich beams with bolt connectors under off-center impact load
Behaviour of a novel stiffener-enhanced steel–concrete–steel sandwich beam subjected to impact loading
Impact response of steel-PU foam-steel-concrete-steel panel: Experimental, numerical and analytical studies
Response of flat steel-concrete-corrugated steel sandwich panel under drop-weight impact load by a hemi-spherical head
Global response of underground structures subjected to ground shock with consideration of rise time
Energy absorption performance of a new circular–triangular nested tube and its application as sacrificial cladding
Experimental and numerical investigation of low velocity impact response of foam concrete filled auxetic honeycombs
Modeling and Dynamic Response of Curved Steel–Concrete–Steel Sandwich Shells Under Blast Loading
Strength assessment of curved steel-concrete-steel sandwich shells with bolt connectors under concentrated load
Quasi-static crushing behaviour of the energy absorbing connector with polyurethane foam and multiple pleated plates
Low velocity impact performance of curved steel-concrete-steel sandwich shells with bolt connectors
Crushing of energy absorption connectors with polyurethane foam and asymmetric pleated plates
Response of foam concrete-filled aluminum honeycombs subject to quasi-static and dynamic compression
Experimental, numerical, and analytical studies on polyurethane foam-filled energy absorption connectors under quasi-static loading
Numerical study on the dynamic response of a massive liquefied natural gas outer tank under impact loading大型液化天然气储罐在冲击荷载下的动力响应数 值研究
Numerical Study and Multi-objective Optimization of an Energy Absorbing Connector with Curved Plate and Aluminum Foam
Development of dimensionless P-I diagram for curved SCS sandwich shell subjected to uniformly distributed blast pressure
Numerical Modeling and Dynamic Response of 160,000 - M 3 Liquefied Natural Gas Outer Tank under Aircraft Impact
Response of energy absorbing connector with polyurethane foam and multiple pleated plates under impact loading
Experimental study on curved steel-concrete-steel sandwich shells under concentrated load by a hemi-spherical head
Shear failure mechanisms of SCS sandwich beams considering bond-slip between steel plates and concrete
Damage model and damage assessment for single-layer reticulated domes under exterior blast load
Experimental, numerical and analytical studies on the aluminum foam filled energy absorption connectors under impact loading
Numerical simulation of a large LNG concrete outer tank under impact loads
Dynamic crushing response of an energy absorption connector with curved plate and aluminum foam as energy absorber
Dynamic Crushing Behaviors of Aluminum Foam Filled Energy Absorption Connectors
Thermal performance of precast concrete sandwich walls with a novel hybrid connector
Stability of reticulated shell with steel panel as the bracing and time-varying structure for LNG tank during concrete dome casting
Numerical studies of aluminum foam filled energy absorption connectors under quasi-static compression loading
Crushing of a novel energy absorption connector with curved plate and aluminum foam as energy absorber
Responses of curved steel-concrete-steel sandwich shells subjected to blast loading
Experimental and analytical studies of a novel aluminum foam filled energy absorption connector under quasi-static compression loading
Numerical and analytical investigation on a multilayer water fa?ade system subjected to blast loading
A novel multi-functional water fa?ade system for energy saving and blast resisting
Ultimate strength of steel–concrete–steel sandwich panels under lateral pressure loading
Evaluation on thermal behavior of concrete-filled steel tubular columns based on modified finite difference method
Blast performance of water tank with energy absorbing support
Energy absorption of graded foam subjected to blast: A theoretical approach
Experimental and numerical studies of non-composite Steel–Concrete–Steel sandwich panels under impulsive loading
Experimental study of water tank under impulsive loading
Analysis of axially restrained water storage tank under blast loading
Structural performance of water tank under static and dynamic pressure loading
Thermal stress analysis of concrete wall of LNG tank during construction period
Numerical study of water tank under blast loading
Theoretical models for axially-restrained steelconcrete- steel sandwich panels under blast loads
Performance and protection approach of single-layer reticulated dome subjected to blast loading
Modelling and Dynamic Response of Steel Reticulated Shell under Blast Loading
Dynamic response and explosion relief of reticulated shell under blast loading
Numerical simulation of Kiewitt8 single-layer reticulated shell subjected to blast loading
学术兼职
国际防护结构学会(International Association of Protective Structures) 会员 2015-现在
城市建设理论研究(电子版) 编委 2017-现在
American Journal of Civil Engineering 编委 2018-现在
中国建筑金属结构协会铝结构分会理事 2019-现在
《中南大学学报(自然科学版)》青年编委 2020-现在