当前位置: X-MOL首页全球导师 国内导师 › 张幸红

个人简介

张幸红,哈尔滨工业大学航天学院复合材料与结构研究所(http://ccms.hit.edu.cn)教授、所长。 教育与工作经历 1991-1995年:安徽工程大学,热加工工艺与装备专业,获学士学位 1995-1999年:哈尔滨工业大学,材料学学科,获博士学位 1999-2003年:哈尔滨工业大学 复合材料与结构研究所,讲师、副教授 2003.02-2004.01:澳大利亚悉尼大学先进材料研究中心,Visiting Scholar 2004-目前:哈尔滨工业大学复合材料与结构研究所,教授 2016.08-2016.09:英国布里斯托大学先进复合材料研究中心,Senior Visiting Fellow 奖项成果与学术荣誉 教育部自然科学奖一等奖(2006年) 教育部自然科学奖一等奖(2013年) 国家自然科学二等奖(2014年) 国家杰出青年科学基金获得者(2015年) 中国高等学校十大科技进展(2020年) 工信部技术发明一等奖(2022年)

研究领域

1、超高温复合材料与热防护:超高温陶瓷基复合材料,轻质梯度化陶瓷基复合材料,超轻质低烧蚀防/隔热复合材料,新型热防护机制与方法 2、低维碳及复合材料:高性能纳米晶碳纤维、碳膜、碳气凝胶等碳材料及其复合材料的绿色低成本制备与性能,纳米晶碳基复合材料在防/隔热和热管理中的应用

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

Pan Yiwu, Jin Xiangyu, Wang Hebing, Huang He, Wu Can, Yan Xiaojie, Hong Changqing, Zhang Xinghong. Nano-TiO2 coated needle carbon fiber reinforced phenolic aerogel composite with low density, excellent heat-insulating and infrared radiation shielding performance, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2023VL 152:181-189 Wu Can, Huang, He Jin, Xiangyu Yan, Xiaojie Wang, Hebing Pan, Yiwu Zhang, Xinghong, Hong Changqing. Water-assisted synthesis of phenolic aerogel with superior compression and thermal insulation performance enabled by thick-united nano-structure, CHEMICAL ENGINEERING JOURNAL, 2023, VL 464:142805 Xia Liansen, Dong Shun, Xin Jianqiang, Gui Kaixuan, Hu Peitao, Xie Yongshuai, Yang Dongdong, Zhang Xinghong, Zhou Yanchun. Fabrication of multi-anionic high-entropy carbonitride ultra-high-temperature ceramics by a green and low-cost process with excellent mechanical properties, JOURNAL OF ADVANCED CERAMICS, 2023, VL 12: 1258-1272 Lyu Yang, Cheng Yuan, Zhao Guangdong, Wang Mengyu, Chen Guiqing, Zhang Xinghong, Han Wenbo. Modification of SiBCN by Zr atom and its effect on ablative resistance of Cf/SiBCN(Zr) composites, COMPOSITES PART B-ENGINEERING, 2023, VL 253,AR 110511 Yang Yu, Chen Daming, Han Wenbo, Cheng Yuan, Sun Boqian, Hou Chenglin, Zhao Guangdong, Liu Dazhao, Chen Guiqing, Han Jiecai, Zhang Xinghong. Nature-inspired self-activation method for the controllable synthesis of highly porous carbons for high-performance supercapacitors, CARBON, 2023, VL 205: 1-9 Dewei Ni, Yuan Cheng, Jiaping Zhang, Ji-Xuan Liu, Ji Zou, Bowen Chen, Haoyang Wu, Hejun Li, Shaoming Dong, Jiecai Han, Xinghong Zhang, Qiangang Fu, Guo-Jun Zhang, Advances in ultra-high temperature ceramics, composites, and coatings, J. Adv. Ceram., 2022, 11(1): 1-56. Xinghong Zhang, Baihe Du, Ping Hu, Yuan Cheng, Jiecai Han, Thermal response, oxidation and ablation of ultra-high temperature ceramics, C/SiC, C/C, graphite and graphite-ceramics, J. Mater. Sci. Technol., 2022, 102: 137-158. Juntao Song, Guiqing Chen, Huimin Xiang, Fuzhi Dai, Shun Dong, Wenbo Han, Xinghong Zhang, Yanchun Zhou, Regulating the formation ability and mechanical properties of high-entropy transition metal carbides by carbon stoichiometry, J. Mater. Sci. Technol., 2022, 121: 181-189. Yuan Cheng, Yang Lyu, Yongshuai Xie, Chi Zhang, Jiaxin Feng, Liancai Xun, Wengzheng Zhang, Wenbo Han, Shanbao Zhou, Ping Hu, Xinghong Zhang, Jiecai Han, Starting from essence to reveal the ablation behavior and mechanism of 3D PyC C-f/ZrC-SiC composite, Corros. Sci., 2022, 201: 110261. Boqian Sun, Daming Chen, Yuan Cheng, Weidong Fei, Danyu Jiang, Sufang Tang, Guangdong Zhao, Juntao Song, Chenlin Hou, Wenzheng Zhang, Shiqi Wu, Yu Yang, Mingyi Tan, Jie Zhang, Daqing Wei, Chaowei Guo, Wei Zhang, Shun Dong, Shanyi Du, Jiecai Han, Jian Luo, Xinghong Zhang, Sugar-derived Isotropic Nanoscale Polycrystalline Graphite Capable of Considerable Plastic Deformation, Adv. Mater., 2022, e2200363. Mingyi Tan, Daming Chen, Yuan Cheng, Huiqi Sun, Guiqing Chen, Shun Dong, Guangdong Zhao, Boqian Sun, Shiqi Wu, Wenzheng Zhang, Jiecai Han, Wenbo Han, Xinghong Zhang, Anisotropically Oriented Carbon Films with Dual-Function of Efficient Heat Dissipation and Excellent Electromagnetic Interference Shielding Performances, Adv. Funct. Mater., 2022: 2202057. Wu Shiqi, Chen Daming, Zhao Guangdong, Cheng Yuan, Sun Boqian, Yan Xiaojie, Han Wenbo, Chen Guiqing, Zhang Xinghong, Controllable synthesis of a robust sucrose-derived bio-carbon foam with 3D hierarchical porous structure for thermal insulation, flame retardancy and oil absorption, Chem. Eng. J., 2022, 434: 134514. Yu Yang, Daming Chen, Yuan Cheng, Boqian Sun, Guangdong Zhao, Weidong Fei, Wenbo Han, Jiecai Han, Xinghong Zhang, Eco-friendly and sustainable approach of assembling sugars into biobased carbon fibers, Green Chem., 2022. Xiangyu Jin, Jianguo Xu, Yiwu Pan, Hebing Wang, Bin Ma, Feng Liu, Xiaojie Yan, Can Wu, He Huang, Haiming Cheng, Changqing Hong, Xinghong Zhang, Lightweight and multiscale needle quartz fiber felt reinforced siliconoxycarbide modified phenolic aerogel nanocomposite with enhanced mechanical, insulative and flame-resistant properties, Compos. Sci. Technol., 2022, 217: 109100. Baihe DU, Yuan CHENG, Liancai XUN, Shuchang ZHANG, Jing TONG, Qingrong LV, Shanbao ZHOU, Ping HU, Xinghong ZHANG. Using PyC modified 3D carbon fiber to reinforce UHTC under low temperature sintering without pressure, Journal of Advanced Ceramics, 2021, 10(4): 871–884 Cheng Fang, Ping Hu, Shun Dong, Jiaxin Feng, Liancai Xun, Xinghong Zhang, Influence of hydrothermal carbon coating on the properties of CF/ZrB2/SiBCN prepared by slurry injection, J. Eur. Ceram. Soc., 2021, 41(1): 84-91. Yehong Cheng, Yumin An, Yaxiong Liu, Qiang Wei, Wenbo Han, Xinghong Zhang, Peng Zhou, Chuncheng Wei, Ning Hu, ZrB2-Based Brick-and-Mortar Composites Achieving the Synergy of Superior Damage Tolerance and Ablation Resistance, ACS Appl. Mater. Interfaces, 2020, 12(29): 33246-33255 Dongyang Zhang, Jiaxin Feng, Ping Hu, Liancai Xun, Meng Liu, Shun Dong, Xinghong Zhang, Enhanced mechanical properties and thermal shock resistance of C-f/ZrB2-SiC composite via an efficient slurry injection combined with vibration-assisted vacuum infiltration, J. Eur. Ceram. Soc., 2020, 40(15): 5059-5066. Ping Hu, Yuan Cheng, Dongyang Zhang, Liancai Xun, Meng Liu, Chi Zhang, Xinghong Zhang, Shanyi Du, From ferroconcrete to C-f/UHTC-SiC: A totally novel densification method and mechanism at 1300 degrees C without pressure, Compos. Part B-Eng., 2019, 174: 107023. Liwen Yan, Changqing Hong, Jilei Liu, Bin Du, Shanbao Zhou, Guangdong Zhao, Ping Hu, Xinghong Zhang, Multifunctional Thermal Barrier Application Composite with SiC Nanowires Enhanced Structural Health Monitoring Sensitivity and Interface Performance, ACS Appl. Mater. Interfaces, 2018, 10(33): 27955-27964. Ping Hu, Yuan Cheng, Maosong Xie, Yu Yang, Chang Liu, Qiang Qu, Xinghong Zhang, Shanyi Du, Damage mechanism analysis to the carbon fiber and fiber-ceramic interface tailoring of C-f/ZrC-SiC using PyC coating, Ceram. Int., 2018, 44: 19038-19043. Anzhe Wang, Ping Hu, Xinghong Zhang, Wenbo Han, Guiqing Chen, Jiecai Han, Accurate measurement of fracture toughness in structural ceramics, J. Eur. Ceram. Soc., 2017, 37(13): 4207-4212. Liwen Yan, Changqing Hong, Boqian Sun, Guangdong Zhao, Yehong Cheng, Shun Dong, Dongyang Zhang, and Xinghong Zhang, In Situ Growth of Core Sheath HeterostructuralSiC Nanowire Arrays on Carbon Fibers and Enhanced Electromagnetic Wave Absorption Performance, ACS Appl. Mater. Interfaces, 2017,9: 6320-6331 Haiming Cheng, Huafei Xue, Changqing Hong, Xinghong Zhang, Preparation, mechanical, thermal and ablative properties of lightweight needled carbon fibre felt/phenolic resin aerogel composite with a bird's nest structure, Compos. Sci. Technol, 2017, 140: 63-72. Liwen Yan, Xinghong Zhang, Ping Hu, Guangdong Zhao, Shun Dong, Dazhao Liu, Boqian Sun, Dongyang Zhang, Jiecai Han, Carbon Nanofiber Arrays Grown on Three-Dimensional Carbon Fiber Architecture Substrate and Enhanced Interface Performance of Carbon Fiber and Zirconium Carbide Coating, ACS Appl. Mate. Interfaces, 2017, 9(20): 17338-17347. Yumin An, Jiecai Han, Xinghong Zhang, Wenbo Han, Yehong Cheng, Ping Hu, Guangdong Zhao, Bioinspired high toughness graphene/ZrB2 hybridcomposites with hierarchical architectures spanning several length scales, CARBON, 2016, 107:209-216 Baosheng Xu, Shanbao Zhou, Changqing Hong*, Jiecai Han, Xinghong Zhang**, Mechanical enhancement of lightweight ZrB2-modified carbon-bonded carbon fiber composites with self-grown carbon nanotubs, CARBON, 2016,102:487-493 Guangdong Zhao,* Ping Hu, Shanbao Zhou, Guiqing Chen,Yumin An, Yehong Cheng, Jiadong An, XinghongZhang, et.al.,, Ordered Silica Nanoparticles Grown on a Three-Dimensional Carbon Fiber Architecture Substrate with Siliconborocarbonitride Ceramic as a Thermal Barrier Coating, ACS Applied Materials & Interfaces, 2016, 8:4216-4225 Baoxi Zhang, XinghongZhang, Changqing Hong, Yunfeng Qiu, Jia Zhang, Jiecai Han, and PingAn Hu, Electrostatic Assembly Preparation of High-Toughness Zirconium Diboride-Based Ceramic Composites with Enhanced Thermal Shock Resistance Performance, ACS Applied Materials & Interfaces,2016, 8:11675-11681 Yumin An, Jiecai Han, Wenbo Han, Guangdong Zhao, BaoshengXu, Kunfeng Jin, and Xinghong Zhang, Chemical Vapor Deposition Synthesis Carbon Nanosheet–Coated Zirconium Diboride Particles for Improved Fracture Toughness, J. Am. Ceram. Soc., JOURNAL OFTHE AMERICAN CERAMIC SOCIETY, 2016, 99 [4]:1360–1366 Haiming Cheng, Changqing Hon, Xinghong Zhang, et.al., Super flame-retardant lightweight rime-like carbon-phenolic nanofoam, SCIENTIFIC REPORTS, 2016,6: 33480 Wenbo Han, Guangdong Zhao*, Xinghong Zhang,et.al., Graphene oxide grafted carbon fiber reinforced siliconborocarbonitride ceramics with enhanced thermal stability, CARBON, 2015, 95:157-165 Zhang Baoxi, Zhang Xinghong, Qiu Yunfeng, et.al., Enhanced thermal shock resistance of ultra-high temperature ceramic by biomimetic surface modification, JOURNAL OF MATERIALS CHEMISTRY A, 2015, 3(5):2199-2206 Zhang, Xinghong, An, Yumin, Han, Jiecai, Graphene nanosheet reinforced ZrB2-SiC ceramic composite by thermal reduction of graphene oxide, RSC ADVANCES, 2015, 5: 47060-47065 Zhang Xinghong, Xu Baosheng, Hong Changqing, Carbon-bonded carbon fiber composites containing uniformly distributed silicon carbide, RSC ADVANCES, 2014, 4(13): 6591-6596 Lin Jia, ZhangXinghong, Han Jiecai, et.al., Oxidation behavior and phase transition of ZrB2-SiCw-ZrO2f ceramic, CORROSION SCIENCE, 2014, 78:13-21 Chen Liu, JiecaiHan, Xinghong Zhang, Changqing Hong, Shanyi Du, Lightweight carbon-bonded carbon fiber composites prepared by pressure filtration technique, CARBON, 2013, 59: 547-554 Xinghong Zhang, Jiaxin Gao,Changqing Hong, Jiecai Han and Wenbo Han, Observation of SiC nanodots and nanowires in situ growth in SiOC ceramics, CrystEngComm, 2013,15:7803–7807 Ning Li, PingHua, Xinghong Zhang, Yingzhi Liu, Wenbo Han, Effects of oxygen partial pressure and atomic oxygen on the microstructure of oxide scale of ZrB2–SiC composites at 1500℃, Corrosion Science, 2013,73:44–53 ? Changqing Hong, Jiecai Han, Xinghong Zhang, Hui David, Weijie Li, Yaxi Chen, Shanyi Du. Novel phenolic impregnated 3-D Fine-woven pierced carbon fabric composites: Microstructure and ablation behavior. COMPOSITES PART B: ENGINEERING. 2012, 43: 2389–2394 Chuncheng Wei , XinghongZhang, Ping Hu, Wenbo Han, Guishan Tian. The fabrication and mechanicalproperties of bionic laminated ZrB2–SiC/BN ceramic prepared by tapecasting and hot pressing, Scripta Materialia, 2011, 65: 791–794. Zhang, Xinghong, Luo, Xiaoguang, Li Jinping, The ideal strength of transition metal diborides TMB2 (TM = Ti, Zr,Hf): Plastic anisotropy and the role of prismatic slip, SCRIPTAMATERIALIA, 2010,62(8): 625-628 Hu Ping, ZhangXing-Hong, Han Jie-Cai, Effect of Various Additives on the Oxidation Behavior of ZrB2-Based Ultra-High-Temperature Ceramics at 1800 degrees C, JOURNALOF THE AMERICAN CERAMIC SOCIETY, 2010,93(2): 345-349 Han Jiecai, HongChangqing, Zhang, Xinghong, Highly porousZrO2 ceramics fabricated by a camphene-based freeze-casting route: Microstructure and properties, JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2010, 30(1): 53-60 Zhang XH, Wang Z, Hu P, Mechanical properties and thermal shock resistance of ZrB2-SiC ceramic toughened with graphite flake and SiC whiskers, SCRIPTA MATERIALIA, 2009,61(8): 809-812 Weijie Li, XinghongZhang, Changqing Hong, Wenbo Han, Jiecai Han, Microstructure and mechanical properties of zirconia-toughened ZrB2-MoSi2 composites prepared by hot pressing, Scripta Materialia, 2009, 60: 100–103 Xinghong Zhang, Ping Hu,Jiecai Han and Songhe Meng, Ablation behavior of ZrB2-SiC ultra hightemperature ceramics under simulated atmospheric re-entry conditions, Composites Science and Technology, 2008,68:1718–1726 Xinghong Zhang, Ping Hu,Jiecai Han, Structure evolution of ZrB2–SiC during the oxidation in air, Journal of Materials Research, 2008, 23(7): 1961-1972 Xinghong Zhang, Lin Xu, ShanyiDu, Wenbo Han, Jiecai Han and Chengyong Liu, Thermal shock behavior of SiC-whisker-reinforced diboride ultrahigh-temperature ceramics, Scripta Materialia, 2008,59:55–58 Xinghong Zhang, Lin Xu, ShanyiDu, Wenbo Han, Jiecai Han, Preoxidation and crack-healing behavior of ZrB2-SiCceramic composite, Journal of the American Ceramic Society, 2008, 91 [12]: 4068–4073 Jiecai Han, PingHu, Xinghong Zhang, Songhe Meng and Wenbo Han, Oxidation-resistantZrB2–SiC composites at 2200 °C, Composites Science and Technology, 2008, 68(3-4): 799-806 Jiecai Han,Changqing Hong, Xinghong Zhang, Songhe Meng, Microstructural characterization and ablation mechanism of TiB2/(Cu,Ni) melt-infiltrated ceramic composite, Composites Science and Technology, 2007,67: 2231–2237 Jiecai Han, PingHu, Xinghong Zhang and Songhe Meng, Oxidation behavior of zirconium diboride–silicon carbide at 1800 °C, Scripta Materialia, 2007, 57(9): 825-828 Xinghong Zhang, Ping Hu, Jiecai Han, Lin Xu and Songhe Meng, The addition of lanthanum hexaboride to zirconium diboride for improved oxidation resistance, Scripta Materialia, 2007,57(11):1036-1039 Xinghong Zhang, Changqing Hong, Jiecai Hana and Hexin Zhang, Microstructure and mechanical properties ofTiB2/(Cu, Ni) interpenetrating phase composites, Scripta Materialia, 2006,55: 565–568 Xinghong Zhang, Jiecai Han, Xiaodong He, Qiang Xu, Ablation-resistance of combustion synthesized TiB2-Cucermet, Journal of the American Ceramic Society, 2005, 88 (1): 89-94 Jiecai Han,Changqing Hong, Xinghong Zhang, Thermal shock resistance of TiB2-CuInterpenetrating Phase Composites, Composite Science and Technology, 2005, 65(11-12): 1711-1718 Baolin Wang,Yiu-Wing Mai, Xinghong Zhang, Functionally Graded Materials under Severe Thermal Environments, Journal of the American Ceramic Society, 2005, 88(3), 683-690 Baolin Wang, Yiu-Wing Mai, Xinghong Zhang, Thermal Shock Resistance of Functionally Graded Materials, Acta Materialia, 2004, 52(17): 4961-4972 Xinghong Zhang, Chuncheng Zhu,Wei Qu, Xiaodong He and V.L.Kvanin, Self-propagating high temperature combustion synthesis of TiC/TiB2 ceramic-matrix Composites, Composite Science and Technology, 2002, 62 (15): 2037 – 2041

推荐链接
down
wechat
bug