近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Wang ZW, Wang B*, Li S, Jin XY, Zhang XH, Meng SH, Fang GD*. Temperature-dependent oxidation kinetics and mechanical properties degradation of Cf/ZrB2-SiC composites. Corrosion Science, 2023-8-23,111479. https://doi.org/10.1016/j.corsci.2023.111479
Xiao J, Fang GD*, Jin XY, Wang B, Meng SH. A comprehensive study of pyrolysis characteristics of silicone-modified phenolic aerogel matrix Nanocomposites: Kinetic Analysis, ReaxFF MD Simulations, and ANN prediction. Chemical Engineering Journal. 2023-7, 145049. https://doi.org/10.1016/j.cej.2023.145049
Wang ZW, Wang B*, Jiang XY, Wang XS, Sun W, Fang GD*, Meng SH. Effects of non-uniform needled microstructure on failure mechanisms of 3D needled composites thick-walled cylinder under axial compression and internal pressure. J Materi Sci, 2023-5-23, http://doi.org/10.1007/s10853-023-08569-2
Wang HY, Wang ZW, Wang B, Fang GD, Meng SH. Kinematic modeling with Micro-CT slice auxiliary calibration for 2.5D woven SiO2f/SiO2 composites. Composites Communications, 2023,40: 101613.
Zhang JP, Wang Y, Yang W, Dai XJ, Zhao Y, Fang GD. Identifying the contributions of constituents to the fracture performance and failure mechanism of fiber metal laminate. Polymer Composites, 2023-5, https://doi.org/10.1002/pc.27395
戚云超, 方国东*, 周振功, 梁军*. 不同针刺工艺的针刺复合材料面内拉伸强度分析. 材料研究学报, 2023, 37(1):21-28.
Jie Xiao, Hanqi Zhang, Xu Gao, Hongyue Wang, Guodong Fang*,Bing Wang, Changqing Hong, Songhe Meng. Insight into pyrolysis behavior of silicone-phenolic hybrid aerogel through thermal kinetic analysis and ReaxFF MD simulations. Chemical Engineering Journal, 2023,458(15):141480. https://doi.org/10.1016/j.cej.2023.141480.
Yunchao Qi , Guodong Fang*, Zhengong Zhou, Songhe Meng, Jun Liang*. Process design of variable fiber content in layers of needle-punched preforms. J Mater Sci. 2023-1-1, https://doi.org/10.1007/s10853-022-08115-6.
Jipeng Zhang, Yue Wang, Wen Yang, Xiangjun Dai, Yuan Zhao, Guodong Fang. Quasi-static fracture characterization of fiber metal laminate with crack resistance curve based on δ5. Polymer Composites, 2022.12.16. https://doi.org/10.1002/pc.27198.
Che L, Liu S, Liang J, Fang GD*. An improved four-parameter conjugated bond-based peridynamic method for fiber-reinforced composites. Engineering Fracture Mechanics, 2022,10-8, 108863. https://doi.org/10.1016/j.engfracmech.2022.108863
Wang, B., Zhu, J., Fang, G*, Huang, J., Liang, J.*, Dai, F., Meng, S., Study on stiffness distribution and failure mechanisms of the twisted profiled textile composite structure under cantilever load, Composite Structures, 2022, doi: https://doi.org/10.1016/j.compstruct.2022.116286.
Wang B, Wang ZW, Fang GD*, Li ML, Zhu JQ, Zhao Y*, Meng SH. Inverse determine the interfacial strength and surface geometry effects concerning carbon fiber reinforced epoxy composites by experiment aided FFT-based spectral analysis. Polymer Composites. 2022;1–13. DOI: 10.1002/pc.27098.
王宏越, 王兵, 方国东, 孟松鹤*. 2.5D机织浅交弯联复合材料数字单元建模分析. 航空学报, 2022-8-3.
Wang B, Chen ZM, Fang GD*, Meng SH. Non-orthogonal FE model with stress smoothing for progressive damage analysis of shear pre-deformed 3D angle-interlock woven composites under compression. International Journal of Mechanical Sciences, 2022, 232:107642. 2022.10.15.
Qi YC, Fang GD*, Wang ZW,Meng SH, Liang J*. Determination of needling process satisfying stiffness requirements of 3D needled composites[J]. Ploymer Composites, 2022, DOI: 10.1002/pc.26913.
Wang ZW, Wang B*, Qin XQ, Dong S, Xu CH, Meng SH, Fang GD*. The effect of fiber preform configuration on in-plane compressive behavior of high porosity needled carbon/carbon composites in elevated temperature environment. Ceramics International, 2022-5-23, https://doi.org/10.1016/j.ceramint.2022.05.209.
Liu S, Fang GD*, Fu MQ, Yan XQ, Meng SH, Liang J*. A coupling model of element-based peridynamics and finite element method for elastic-plastic deformation and fracture analysis. International Journal of Mechanical Sciences, 2022, https://doi.org/10.1016/j.ijmecsci.2022.107170.
Ji QX, Qi YC, Liu CW, Meng SH, Liang J*, Kadic M, Fang GD*. Design of thermal cloaks with isotropic materials based on machine learning. International Journal of Heat and Mass Transfer, 2022, 189(15):122716.
Wu ZW, Zhang ZY, Wu JG, Liang J, Ge JR*, Liu XL, Fang GD*. A New Time-frequency Domain Simulation Method for Damage Accumulation and life prediction of Composite Thin-wall Structures under Random Cyclic Loadings. 2021, 15:114999.
Wang B, Fang GD*, Wang HY, Liang J*,Dai FH, Meng SH. Uncertainty modelling and multiscale simulation of woven composite twisted structure, Composites Science and Technology, 2021-10.
Damage analysis of shear pre-deformed 3D angle-interlock woven composites using experiment and non-orthogonal finite element model. Composites Communications. 2021-10.
Ji Q., Moughames J., Chen X. Fang GD, et al. 4D Thermomechanical metamaterials for soft microrobotics. Commun Mater 2, 93 (2021). https://doi.org/10.1038/s43246-021-00189-0.
Liu S, Fang GD*, Liang J, Jiang XY, Yan XQ, Meng SH. An Element-Based Peridynamic Model for Elastic and Fracture Analysis of Composite Lamina. Journal of Peridynamics and Nonlocal Modeling, 2021-8-20, doi:10.1007/s42102-021-00059-w.
Wang ZW, Fang GD, Wang B, Hu P, Yi FJ*, Meng SH. Study on toughening mechanisms of pyrolytic carbon interface layer in Cf/ZrB2-SiC composites using in-situ tensile experimental and numerical methods. Journal of the European Ceramic Society, 2021, https://doi.org/10.1016/j.jeurceramsoc.2021.04.028
方国东，刘硕. 基于单元式近场动力学方法的功能梯度材料弹塑性模型. 武汉大学学报（工学版）,2021,54(2):122-128.
Ji QX, Chen XY, Liang J, Laude V, Guenneau S, Fang GD*, Kadic M. Designing thermal energy harvesting devices with natural materials through optimized microstructures. International Journal of Heat and Mass Transfer,2021,169:120948. 2021-1-6
Liu S, Fang GD*, Fu MQ, Liang J. Study of three-dimensional Euler-Bernoulli beam structures using element-based peridynamic model ,European Journal of Mechanics / A Solids, 2020-12-4
Fang GD, Liu S*, Liang J*, Fu MQ, Wang B, Meng SH. A stable non‐ordinary state‐based peridynamic model for laminated composite materials. International Journal for Numerical Methods in Engineering, 2020-9-13, https://doi.org/10.1002/nme.6542.
Wang B, Fang GD*, Liang J*, Liu S, Meng SH. Efficient multiscale analysis method for the compressive progressive damage of 3D braided composites based on FFT. Acta Mechanica, 2020-8-18.
Liu S, Fang GD*, Liang J*, Fu MQ. A coupling method of non-ordinary state-based peridynamics and finite element method. European Journal of Mechanics / A Solids, 2020-6-28.
Fu MQ, Fang GD*, Wu ZW, Zhou ZG, Liang J*. An improved shell-fastener model for modelling C/SiC composite bolted joints with rough surface characteristics. Composite Structures, 2020-5-21.https://doi.org/10.1016/j.compstruct.2020.112516
Fu MQ, Fang GD*, Liu S, Wang B, Zhou ZG, Liang J*. Failure analysis of 2D C/SiC composite z-pinned/bonded hybrid single-lap joints. Ceramics international， 2020-5-18. Doi:10.1016/j.ceramint.2020.05.204
Zhang J, Fang GD*, Yang LW, Li W, Hong CQ, Meng SH. Comparison of ablative and compressive mechanical behavior of several PICA-like ablative materials. Science China: Technological Sciences , 2020, 63, https://doi.org/10.1007/s11431-020-1618-2. 2020-5.
张军，李伟，方国东*，梁军，孟松鹤. 树脂基防隔热复合材料高温响应分析方法研究进展. 宇航学报，2020-5
Wang B, Fang GD*, Tan XJ, Liang J*, Ge JR, Liu S, Investigation on the longitudinal compressive strength of unidirectional carbon fiber/nanoparticles reinforced polymer composites using FFT-based method. Composite Structures, 2020, 247:112448. https://doi.org/10.1016/j.compstruct.2020.112448. 2020-5-4.
Liu S, Fang GD*, Liang J*, Fu MQ, Wang B. A new type of peridynamics: element-based peridynamics. Computer Methods in Applied Mechanics and Engineering. 2020,366:113098.2020-4-25.
Liu S, Fang GD*, Liang J*, Lv DK. A coupling model of XFEM/peridynamics for 2D dynamic crack propagation and branching problems. Theoretical and Applied Fracture Mechanics,2020-3-12, https://doi.org/10.1016/j.tafmec.2020.102573.
Qi YC, Fang GD*, Wang ZW, Liang J*, Meng SH. An improved analytical method for calculating stiffness of 3D needled composites with different needle-punched processes. Composite Structures, 2020. 237: 111938
王章文,张军,方国东*,孟松鹤.界面层对纤维增韧陶瓷基复合材料力学性能影响的研究进展[J].装备环境工程,2020,17(01):77-89.
张军,许阳阳,张运法,洪长青,方国东*.石英灯辐射加热条件下低密度碳/酚醛复合材料高温响应及分析[J].装备环境工程,2020,17(01):51-57.
Wang B, Fang GD*, Liu S, Liang J*, Lv DK. Smoothing interface stress oscillation of composite materials in FFT method by laminate theory. Mechanics of Advanced Materials and Structures. 2020-1-6. doi: 10.1080/15376494.2020.1712749.
Che L, Fang GD*，Wu ZW, Ma YF, Zhang JZ, Zhou, ZG. Investigation of curing deformation behavior of curved fiber metal laminates.Composite Structures, 2019-10, https://doi.org/10.1016/j.compstruct.2019.111570
Ji QX, ChenXY, Liang J, Laude V, Guenneau S, Fang GD*, Kadic M, Non-singular homogeneous polyhedral heat cloak and its realization. ES Energy & Environment., 2019, 7, 29-39. DOI: 10.30919/esee8c361
Che L, Zhang JZ, Ma Yunfei, Fang GD*, Zhou ZG, Dong WZ. Warping deformation analysis of angle-ply fiber metal laminates with slippage during manufacturing. Thin-Walled Structures, 2019-8-28. 2019,145:106378. https://doi.org/10.1016/j.tws.2019.106378
Wei Li, Guodong Fang*, Weijie Li, Jun Liang, Maoyuan Li. Role of mesoscopic features on thermochemical ablative behavior of 3D C/C braided composites. International Journal of Heat and Mass Transfer, 2019-08-19, 2019,144:118602,https://doi.org/10.1016/j.ijheatmasstransfer.2019.118602
戚云超，方国东*，梁军*，谢军波. 三维针刺C/SiC复合材料针刺预制体工艺参数优化. 材料工程,2020,48(01):27-33，2019-07.
王章文，方国东*，白光辉，霍艳艳，易法军. 宽温域无氧环境下热电器件性能实验及仿真. 电子元件与材料, 2019-07
Fang GD, Wang B, Liang J. A coupled FE-FFT multiscale method for progressive damage analysis of 3D braided composite beam under bending load. Composites Science and Technology, 2019-6-18, https://doi.org/10.1016/j.compscitech.2019.107691.
Zhao Y, Alderliesten R, Wu ZW, Zhou ZG, Fang GD*, Zhang JZ, Benedictus R. Determining finite-width-correction factors for fatigue crack growth prediction in GLARE using the equivalent compliance method. International Journal of Fatigue, 2019,127:74-81. 1-JUN-2019, doi: 10.1016/j.ijfatigue.2019.05.037
刘硕, 方国东*, 付茂青, 王兵, 梁军*. 近场动力学与有限元方法耦合求解复合材料损伤问题, 中国科学: 技术科学, 2019-4-9
Wang B, Fang GD*, Liu S, Liang J*. Effect of heterogeneous interphase on the mechanical properties of unidirectional fiber composites studied by FFT-based method. Composite Structures, 2019-4-9, DOI: 10.1016/j.compstruct.2019.04.049.
Wu ZW, Zhao Y, Liang J*, Fu MQ, Fang GD*. A Frequency Domain Approach in Residual Stiffness Estimation of Composite Thin-wall Structures under Random Fatigue Loadings. International Journal of Fatigue, 2019.3, https://doi.org/10.1016/j.ijfatigue.2019.03.013.
Li W, Zhang J, Fang GD*, Li WJ, Liang J*, Meng SH, Evaluation of numerical ablation model for charring composites. SCIENCE CHINA Technological Sciences, 2019.3, https://doi.org/10.1007/s11431-018-9476-2.
李伟,方国东*,李玮洁,王兵,梁军*. 碳纤维增强复合材料微观烧蚀行为数值模拟. 力学学报, 2019-1-16.
Fang GD, Liu S*, Fu MQ, Wang B, Wu ZW, Liang J*. A method to couple state-based peridynamics and finite element method for crack propagation problem. Mechanics Research Communications, 2019,95: 89-95. https://doi.org/10.1016/j.mechrescom.2019.01.005
Wu ZW, Fang GD*, Fu MQ, Chen XJ, Liang J*, Lv DK. Random fatigue damage accumulation analysis of composite thin-wall structures based on residual stiffness method. Composite Structures, 3-JAN-2019, DOI: 10.1016/j.compstruct.2019.01.018.
Ji, Qingxiang; Fang, Guodong; Liang, Jun. Achieving thermal magnification by using effective thermal conductivity. THEORETICAL AND APPLIED MECHANICS LETTERS. 2018, 8(3):164-170
Q Ji, J Zhang, G Fang*, G Bai, J Liang*. Design of a diamond-shaped thermal concentrator with homogeneous materials. AIP Advances, 8, 095120 (2018);https://doi.org/10.1063/1.5046961.
Zhao Y, Alderliesten R, Zhou ZG, Fang GD*, Zhang JZ, Benedictus R. On the physics of applying finite width and geometry correction factors in fatigue crack growth predictions of GLARE. International Journal of Fatigue, 2018, 117:189-195.
Wu ZW, Liang J*, Fu MQ, Zhou ZG, Fang GD*. Study of random fatigue behavior of C/SiC composite thin-wall plates. International Journal of Fatigue, 2018,116:553-561.
Xie JB, Chen XM, Zhang YF, Fang GD, Chen L*.Experimental and numerical investigation of the needling process for quartz fibers. Composites Science and Technology, 2018, 165:115–123.
Ji QX, Fang GD, Liang J*. Achieving thermal concentration based on fiber reinforced composite microstructures design. Journal of Physics D: Applied Physics, 2018.https://doi.org/10.1088/1361-6463/aacf0a
Fang GD*, Chen CH, Meng SH, Liang J. Mechanical analysis of 3D braided composites by using realistic voxel-based model with local mesh refinement. Journal of Composite Material, 2018, https://doi.org/10.1177/0021998318786541.
Wang S, Zhang J, Fang G*, Zhou ZG, Wang Y. Compressive and flexural behavior of carbon fiber reinforced PPS composites at elevated temperature. Mechanics of Advanced Materials and Structures, 2018, DOI:10.1080/15376494.2018.1472334.
Ji QX, Fang GD, Liang J. Designs for thermal harvesting with nonlinear coordinate transformation. AIP Advances 8, 045316 (2018); https://doi.org/10.1063/1.5027671.
Che L, Zhou Z, Fang G*,Ma Y, Dong W, Zhang J. Cured shape prediction of fiber metal laminates considering interfacial interaction. Composite Structures, 2018,194(15):564-574.
刘硕，方国东*，王兵，付茂青，梁军*. 近场动力学与有限元方法耦合求解热传导问题. 力学学报，2018,50(2):339-348.
Xie J, Fang G*,Chen Z, Liang J*,Numerical and experimental studies on scattered mechanical properties for 3D needled C/C-SiC composites. Composite Structures, 2018,192(15):545-554.
Chen Z, Fang G*, Xie J, Liang J. Mechanisms-based strength criterion for 3D needled C/C-SiC composites under in-plane biaxial compression. Mechanics of Advanced Materials and Structures , 2018, DOI:10.1080/15376494.2018.1452316.
Wang B, Fang GD*, , Liu S, Fu MQ, Liang J. Progressive damage analysis of 3D braided composites using FFT-based method. Composite Structures, 2018,https://doi.org/10.1016/j.compstruct.2018.02.040.
Wang SY, Zhang JZ, Fang GD*, Zhou ZG, Wang Y. Mathematical Description of Mechanical Behavior of Woven Fabric Reinforced PPS-Based Composites at High Temperature. Polymer Composites, 2018, DOI 10.1002/pc.24807
Fang GD*, Yuan SG, Meng SH, Liang J. Graded negative Poisson@#%s ratio honeycomb structure design and application. Journal of Sandwich Structures and Materials, 2018，DOI: 10.1177/1099636218755555.
Wang Y, Zhang JP, Fang GD*, Zhang JZ, Zhou ZG, Wang SY, Influence of Temperature on the Impact Behavior of Woven-Ply Carbon Fiber Reinforced Thermoplastic Composites, Composite Structures, 2018,185:435-45.
Zhang JP, Wang Y, Zhang JZ, Zhou ZG, Fang GD*, Zhao Y, Zu SM. Characterizing the Off-Axis Dependence of Failure Mechanism in Notched Fiber Metal Laminates, Composite Structures, 2018,185:148-60.
Fang G*, Chen C, Yuan S, Meng S, Liang J. Micro-tomography based Geometry Modeling of Three-Dimensional Braided Composites. Appl Compos Mater. 2018,25(3):469-483. Fullpaper
Wang Y, Zhang J, Zhang J, Zhou Z, Fang G*, Wang S. Compressive behavior of notched and unnotched carbon woven-ply PPS thermoplastic laminates at different temperatures. Composites Part B: Engineering. 2018;133:68-77. Fullpaper
Zhang J, Wang Y, Fang G*, Zhao Y, Zhang J, Zhou Z. Application of energy dissipation approach for notched behavior in fiber metal laminates. Composite Structures. 2017;180:809-20. Fullpaper
Xie J, Fang G*, Chen Z, Liang J. An anisotropic elastoplastic damage constitutive model for 3D needled C/C-SiC composites. Composite Structures. 2017;176:164-77.
Xie J, Fang G*, Chen Z, Liang J. High-temperature constitutive model for three-dimensional needled C/C-SiC composite under tensile loading. Journal of Composite Materials. 2017;51(18):2619-29.
Wang S, Zhou Z, Zhang J, Fang G*, Wang Y. Effect of temperature on bending behavior of woven fabric-reinforced PPS-based composites. Journal of Materials Science. 2017;52(24):13966-76.
Wang L, Kong D, Fang G, Liang J. High-temperature tensile strength and fracture behavior of ZrB2-SiC-graphite composite. Int J Appl Ceram Technol. 2017;14(1):31-8.
Fang G, El Said B, Ivanov D, Hallett SR. Smoothing artificial stress concentrations in voxel-based models of textile composites. Composites Part A: Applied Science and Manufacturing. 2016;80:270-84. Fullpaper
Xie J, Fang G*, Chen Z, Liang J. Modeling of Nonlinear Mechanical Behavior for 3D Needled C/C-SiC Composites Under Tensile Load. Appl Compos Mater. 2016;23(4):783-97. Fullpaper
谢军波,方国东,陈振,梁军. 针刺C/C-SiC复合材料剪切非线性本构关系[J]. 复合材料学报,2016,33(07):1507-1514.全文
Shi S, Li L, Fang G, Liang J, Yi F, Lin G. Three-dimensional modeling and experimental validation of thermomechanical response of FRP composites exposed to one-sided heat flux. Materials and Design. 2016;99:565-73.
Shi S, Gu L, Liang J, Fang G, Gong C, Dai C. A mesomechanical model for predicting the degradation in stiffness of FRP composites subjected to combined thermal and mechanical loading. Materials and Design. 2016;89:1079-85.
Shi S, Gong C, Liang J, Fang G, Wen L, Gu L. Ablation mechanism and properties of silica fiber-reinforced composite upon oxyacetylene torch exposure. Journal of Composite Materials. 2016;50(27):3853-62.
Chen Z, Fang G*, Xie J, Liang J. Experimental study of high-temperature tensile mechanical properties of 3D needled C/C-SiC composites. Materials Science and Engineering A. 2016;654:271-7.
Xie J, Liang J, Fang G*, Chen Z. Effect of needling parameters on the effective properties of 3D needled C/C-SiC composites. Composites Science and Technology. 2015;117:69-77. Fullpaper
Wang LL, Liang J, Fang GD*.High temperature fracture behavior of ZrB2–SiC–graphite composite in vacuum and air. Journal of Alloys and Compounds, 2015, 619: 145-150.
Wang L, Liang J, Fang G*. Dynamic compressive behavior of ZrB2-based ceramic composites at room temperature and 1073 K. Int J Appl Ceram Technol. 2015;12(6):1210-6.
刘宝瑞，方国东*，梁军. 基于Voxel有限元网格对球形夹杂复合材料的应力分析. 复合材料学报， 2015, 32（6）:1769-1776. 全文
王玲玲,方国东,梁军. ZrB_2基超高温陶瓷复合材料的高温拉伸损伤行为[J]. 复合材料学报,2015,32(01):125-130.
李林杰, 方国东*, 易法军, 梁军. 高硅氧/酚醛复合材料热变形实验测试及表面烧蚀形貌分析. 固体火箭技术. 2015(03):445-50.全文
陈振, 方国东, 谢军波, 梁军. 三维轴编C/C复合材料双向拉伸实验研究. 固体火箭技术. 2015(02):267-72.
王玲玲, 方国东, 梁 军. ZrB2基超高温陶瓷复合材料的高温拉伸损伤行为. 复合材料学报，2014
陈海龙，方国东*，李林杰，梁军，时圣波. 高硅氧/酚醛复合材料热-力-化学多物理场耦合计算, 复合材料学报，2014，31:533-540. 全文
Wang LL, Fang GD*, Liang J, Wang C. Formation mechanism and high temperature mechanical property characterization of SiC depletion layer in ZrB2/SiC ceramics. Materials Characterization. 2014, 95:245-251. Fullpaper
Wang LL, Liang J, Fang GD, Wan X-Y, Xie JB. Effects of strain rate and temperature on compressive strength and fragment size of ZrB2-SiC-graphite composites. Ceram Int. 2014;40(4):5255-5261.
Shi S-B, Liang J, Liu Z-G, Ding X-H, Fang G-D. Endothermic mechanism of silica/phenolic composite under ablative environment. Guti Huojian Jishu/Journal of Solid Rocket Technology. 2013;36(1):113-118. 全文链接
Shi S, Liang J, Yi F, Fang G. Modeling of one-dimensional thermal response of silica-phenolic composites with volume ablation. Journal of Composite Materials. 2013;47(18):2219-2235.
Shi S, Liang J, Lin G, Fang G. High temperature thermomechanical behavior of silica-phenolic composite exposed to heat flux environments. Composites Science and Technology. 2013;87:204-209.
Wang B, Fang G*, Liang J, Wang Z. Failure locus of 3D four-directional braided composites under biaxial loading. Appl Compos Mater. 2012;19(3-4):529-544. Fullpaper
Liang J, Wang Y, Fang G, Wang G. Influence of oxidation healing for cracks on the strength of hot-pressed ZrB2-SiC-AlN ceramics. Int J Appl Ceram Technol. 2012;9(2):441-446.
Fang G-D*, Han J-C, Liang J, Meng S-H, Yang Y. Effective behavior of constituent materials of in-plane braided C/C composites. Guti Huojian Jishu/Journal of Solid Rocket Technology. 2012;35(5):644-649. 全文
Shi S-B, Liang J, Fang G-D. Effect of thermal physical properties on ablation properties of high silica/phenolic composite. Guti Huojian Jishu/Journal of Solid Rocket Technology. 2011;34(3):354-359. 全文
Liang J, Liang J, Fang G, Pan Z, Li W. Evaluation on spot weld models in structural dynamic analysis of automotive body in white. Chinese Journal of Mechanical Engineering (English Edition). 2011;24(1):84-90.
Fang G*, Liang J, Wang B, Wang Y. Effect of interface properties on mechanical behavior of 3D four-directional braided composites with large braid angle subjected to uniaxial tension. Appl Compos Mater. 2011;18(5):449-465. Fullpaper
Fang G*, Liang J, Lu Q, Wang B, Wang Y. Investigation on the compressive properties of the three dimensional four-directional braided composites. Composite Structures. 2011;93(2):392-405.
Fang G, Liang J. A review of numerical modeling of three-dimensional braided textile composites. Journal of Composite Materials. 2011;45(23):2415-2436. Fullpaper
Liang J, Wang Y, Fang G, Han J. Research on thermal shock resistance of ZrB2-SiC-AlN ceramics using an indentation-quench method. J Alloy Compd. 2010;493(1-2):695-698.
Fang Guodong*, Liang Jun, Wang Yu, Wang Baolai. The effect of yarn distortion on the mechanical properties of 3D four-directional braided composites. Composites Part A: Applied Science and Manufacturing. 2009;40(4):343-350. Fullpaper
Fang Guodong*, Liang Jun, Wang Baolai. Progressive damage and nonlinear analysis of 3D four-directional braided composites under unidirectional tension. Composite Structures. 2009;89(1):126-133. Fullpaper
京公网安备 11010802027423号